Abstract:The reactive extrusion of maleic anhydride grafted polypropylene (PP-g-MAH) with ethylenediamine (EDA) as coupling agent was carried out in a co-rotating twin-screw extruder to produce long chain branched polypropylene (LCBPP). Part of PP-g-MAH was replaced by maleic anhydride grafted high-density polyethylene (HDPE-g-MAH) or linear low-density polyethylene (LLDPE-g-MAH) to obtain hybrid long chain branched (LCB) polymers. Compared with the linear PP, PE and their blends, the LCB polyolefins exhibit excellent dynamic shear and transient extensional rheological characteristics such as increased dynamic modulus, higher low-frequency complex viscosity, significantly enhanced melt strength and strain-hardening behaviors. LCB polymers also have higher tensile strength, tensile modulus, impact strength and lower elongation at break than linear polymer and their blends. Supercritical carbon dioxide (scCO2) was introduced in the reactive extrusion process. With the presence of scCO 2, the motor current of twin extruder was decreased and LCB polyolefins with lower MFR, higher complex viscosity and increased tensile strength and modulus were obtained. This indicates that the application of scCO2 can reduce the viscosity of melt in extruder, enhance the diffusion of reactive species, facilitate the reaction between functional groups, and increase the LCB density. The foaming behavior of both linear and LCB polyolefins were studied. The results show that cellular materials produced from the LCB polyolefins have higher weight reduction, smaller cell size and better mechanical properties than those produced from the linear polymers.

Highly Endurable Hydrostatic Pressure Polyethylene Pipe Prepared by the Combination of Rotation Extrusion and Lightly Cross-Linked Polyethylene

Effect of rotation extrusion and molecular weight on ductile failure of polyethylene pipes under hydrostatic pressure

Role of Ultrahigh Molecular Weight Polyethylene During Rotation Extrusion of Polyethylene Pipe

High-density Polyethylene Pipe with High Resistance to Slow Crack Growth Prepared Via Rotation Extrusion

Control of Rotation Extrusion over Shish‐kebab Crystal Alignment in Polyethylene Pipe and Its Effect on the Pipe's Crack Resistance

STRUCTURE AND PERFORMANCE OF POLYETHYLENE PIPE PREPARED BY MANDREL AND DIE OPPOSITE ROTATION EXTRUSION

Preparation of High-Performance Polyethylene Tubes under the Coexistence of Silicone Cross-Linked Polyethylene and Rotation Extrusion

Morphology and Property of Polyethylene Pipe Extruded at the Low Mandrel Rotation

Effect of the inner wall cooling rate on the structure and properties of a polyethylene pipe extruded at a high rotation speed

The effect of high-temperature annealing on thermal properties and morphology of polyethylene pipes prepared by rotational shear

Role of Melt Plasticizing Temperature in Morphology and Properties of PE100 Pipes Prepared by a Rotational Shear System

Control over Β-Form Hybrid Shish-Kebab Crystals in Polypropylene Pipe Via Coupled Effect of Self-Assembly Β Nucleating Agent and Rotation Extrusion

Effect of Rotating and Drawing Speeds on the Structure and Properties of Polyethylene Pipes Prepared by Rotation Extrusion

Construction of Pressure-resistance Polyethylene-based Pipes with Highly Biaxially Oriented Structure and Self-reinforcing Mechanism

Effect of Die Temperature on Morphology and Performance of Polyethylene Pipe Prepared Via Mandrel Rotation Extrusion

Preparation of high melt strength polypropylene by the reactive extrusion process and its foaming application

Enhanced effect of thermal expansion process in rotational shear technology for high performance HDPE pipes

The Formation and Evolution of the Hierarchical Structure of Polyethylene Pipe During Extrusion Processing

Thermally Conductive Study of Polyethylene/Al2O3Composite Networks Cross-linked Pipes by Electron Beam Irradiation

The Effect of Cooling Mode on Slow Crack Growth Resistance of Polyethylene Pipe

Crystalline Composition And Morphology In Isotactic Polypropylene Pipe Under Combining Effects Of Rotation Extrusion And Fibril Beta-Nucleating Agent