Abstract:Nickel-based single crystal superalloy has no grain boundary and excellent high-temperature performance. The traditional grinding mechanism of shearing and slipping along the polycrystalline material's grain boundary based on the theory of elastic–plastic deformation is not suitable for grinding single crystal parts. At present, there are few studies on microgrinding nickel-based single crystal superalloy. The grinding quality directly affects the workpiece's service life. To realize high-quality and low-damage grinding nickel-based single crystal superalloy (001) crystal plane, this paper studied the surface roughness and the wear of the microgrinding tool. Firstly, it was assumed that the protrusion height of the electroplated abrasives on the grinding tool obeyed Rayleigh distribution. Based on the cutting state of abrasives, the prediction model of surface roughness of microgrinding nickel-based single crystal superalloy was established and verified by experiments. Secondly, the effect of grinding parameters on microgrinding surface roughness was analyzed through a single-factor experiment. Finally, the main wear forms, wear mechanism of grinding tool and the influence of grinding parameters on wear of grinding tool were analyzed. The results showed: although there was some error between the predicted value and the experimental value, the predicted value of the roughness and the experimental value had the same trend with the change of microgrinding parameters; with the increase in spindle speed (ng) and the decrease in grinding depth (ap), the surface roughness of microgrinding nickel-based single crystal superalloy showed a decreasing trend; with the increase in feeding rate (vw), the surface roughness increased obviously; the wear of the grinding tool could be divided into five forms; the diameter of the microgrinding tool showed a trend of rapid reduction, then steady reduction, and finally rapid reduction under all grinding parameters. This study provided an important theoretical and practical reference for the manufacturing of nickel-based single crystal superalloy microparts.

Study on the Grindability of Nano-Vitrified Bond CBN Grinding Wheel for Nickel-Based Alloy

Study on Grinding Force and Surface Roughness of Ni3Al Based Superalloy

Study on grinding nickel-based superalloy GH4169 with ceramic bond CBN wheel controlling abrasive orientation by magnetic field

Performances of Ni3Al-based Intermetallic IC10 in Creep-Feed Grinding

Wear Characteristics Evolution of Corundum Wheel and Its Influence on Performance in Creep Feed Grinding of Nickel-Based Superalloy

Analytical and Experimental Investigation of the Nickel Based Superalloy Using Cryogenic Cooling Grinding

Study on theoretical model of roughness and wear of the microgrinding tool in microgrinding nickel-based single crystal superalloy

Wear behavior of white alumina and seeded gel abrasive wheels in ultrasonic vibration-assisted grinding of nickel-based single-crystal alloy

The synergistic effect of nano Y<sub>2</sub>O<sub>3</sub>/CeO<sub>2</sub> and nano Al<sub>2</sub>O<sub>3</sub>/SiO<sub>2</sub> on the properties of vitrified bond and vitrified bond CBN composites

A comparative study on FeAl and NiAl bonded diamond tools for dry grinding based on wear characteristics at elevated temperature

Influence of Electroplated CBN Wheel Wear on Grinding Surface Morphology of Powder Metallurgy Superalloy FGH96

Effects of grinding parameters on surface integrity of GH4169 nickel-based superalloy

Manufacture of A New Kind Diamond Grinding Wheel with Al-Based Bonding Agent

Comparative study on NiAl and FeAl intermetallic-bonded diamond tools and grinding performance for Si3N4 ceramic

Study on the Preparation of NiAl Intermetallic-Bonded Diamond Grinding Block and Grinding Performance for Sapphire

Self-sharpening property of porous metal-bonded aggregated cBN wheels during the grinding of Ti–6Al–4V alloys

Manufacture of a new style diamond grinding wheel with Al-based bonding matrix

Experimental Investigation on Grinding Performance of Microcrystalline Alumina Abrasive Grinding Wheel for Superalloys

Experimental Investigation On Surface Integrity In Grinding Titanium Alloys With Small Vitrified Cbn Wheel

Experimental Study of Lubricating Property at Grinding Wheel/Workpiece Interface Under NMQL Grinding

A study on ultrasonic assisted grinding of nickel-based superalloys