Abstract:Accurate prediction of welding residual stresses is often challenging due to the complexity of the welding process which includes moving heat source, temperature-dependent material properties etc. Over the past two decades or so, the numerical simulation technologies have been widely used in the welding process and a number of numerical models have been proposed to predict temperature field and residual stresses field induce by welding process. In the previous numerical simulations, the weldment was either in Free State or rigidly constrained. Such manipulations can not reflect the realistic constraint conditions of the weldment. In this simulation, clamps and backing board are all included in the model as elastic body and analytical rigid body, respectively. In the thermal analysis, the thermolysis of clamps and backing board can be equivalent to forced convection heat transfer, where the coefficients of forced convection heat transfer are temperature dependent; in the mechanical analysis, both the contact interaction between clamps and weldment and the contact interaction between backing board and weldment are considered, normal and tangent contact interaction properties are assumed as "HARD" contact and Coulomb friction, respectively. After welding process, residual compressive plastic strains existing in the weld zone and HAZ are the sources of residual stresses. Post welding cold rolling is an effective and convenient method to reduce residual compressive plastic strains induces by welding especially for thin-walled structure. In the previous researches, either welding process and cold rolling process were treated as two separate processes or only the residual stresses induced by welding process was considered as initial condition in the cold rolling process. In this simulation, welding residual stresses, plastic strains and deformations are all imported as the initial state of the cold rolling process to increase the accuracy of the numerical simulation. The import of plastic strains will affect the accuracy of the numerical simulation for the material which has obvious work harden effect.

Numerical Simulation on Deformation and Stress Variation in Resistance Spot Welding of Dual-Phase Steel

Numerical Prediction and Control of Deformation and Residual Stress in Double-Sided Arc Welding of Large Pressure Hull

Numerical modeling from process to residual stress induced in resistance spot welding of DP980 steel

Numerical Simulation of Ultrasonic Spot Welding of Superelastic NiTi Alloys: Temperature Distribution and Deformation Behavior

Numerical Simulation on Welding Behavior in Large-diameter Flange

Electromagnetic Ultrasonic Measurement for Welding Residual Stress Detection - Comparison Between Experiment with Numerical Simulation

Numerical and experimental study on thermal-metallurgical-mechanical behavior of high-strength steel welded joint

Numerical simulation of residual stress and deformation on laser welding of "grooved-coat" structure

Numerical Simulation of Residual Stresses in Multipass Gas Metal Arc-Welded Joints of Thick Aluminum Alloy Plates

Numerical Simulation for Full-Penetration Electron Beam Welding of Ti2AlNb Alloy

Multiphysics Study of Thermal Profiles and Residual Stress in Welding

Numerical Simulations of Friction Stir Welding Process and Subsequent Post Weld Cold Rolling Process

Numerical Investigation on Stress Distribution and Evolution in 9cr/2.25cr Dissimilar Welded Rotor Undergoing Welding and Heat Treatment

Numerical Simulation of Temperature Evolution, Solid Phase Transformation, and Residual Stress Distribution during Multi-Pass Welding Process of EH36 Marine Steel

High precision modeling of welding and post welding cold rolling continuous process in numerical simulation

Numerical and Experimental Analysis of Dissimilar Repair Welding Residual Stress in P91 Steel Considering Solid-State Phase Transformation

Predicting Welding Residual Stress of a Multi-pass P92 Steel Butt-Welded Joint with Consideration of Phase Transformation and Tempering Effect

Chained simulation of the welding-forming process in analysing press force and geometrical deformation using non-linear numerical computation with experimental validation

Numerical Simulation of Welding for Residual Stress Prediction of Low Carbon Steel

Numerical Simulations of Welding Residual Stresses in VPTIG-welded Joints of the 2219 Aluminum Alloy

Numerical Simulation on Residual Stress of Steel Rail Longitudinal Stainless Steel Overlaying Welding