Fabrication of Micro-Rotating Structure by Micro Reciprocated Wire-Edm
Yukui Wang,Xiang Chen,Zhenlong Wang,Huichao Li,Hongzheng Liu
DOI: https://doi.org/10.1088/0960-1317/26/11/115014
2016-01-01
Journal of Micromechanics and Microengineering
Abstract:Micro rotating-structure manufacture has been largely carried out using a variety of processing methods. However, it is difficult to achieve the high-precise machining of the micro rotating structure due to the material constraints and the geometrical limitation of the free-form profile. This paper discusses the fabrication of micro-rotating structure using micro reciprocated wire electrical discharge machining (wire-EDM). To ensure machining accuracy, a gravity takeup for maintaining constant wire tension and a unit for suppressing the wire vibration are designed and fabricated, respectively. Besides, the effects of processing parameters on rotating groove width are investigated by conducting preliminary experiments, showing that high open voltage, discharge capacitance and revolving speed, and low discharge resistance and wire tension cause larger rotating groove width. Nevertheless, the rotating groove width firstly decreases with the reference voltage and feed rate increase in the initial stage and then increases when applying higher values. Based on the preliminary experiments, the proper processing parameters are determined and are used for machining micro bellows core-mould. Ultimately, the micro bellows core-mould is successfully machined by micro reciprocated wire-EDM, exhibiting high machining accuracy, excellent geometric shape and uniformity. Specifically, the machining errors along the axial direction and the radial direction of the micro bellows core-mould are less than 1.4 mu m and 2.3 mu m, respectively.