Abstract:Given the accelerating depletion of iron ore resources, there is growing concern within the steel industry regarding the availability of high-phosphorus iron ore. However, it is important to note that the utilization of high-phosphorus iron ore may result in elevated phosphorus content and notable fluctuations in molten iron, thereby imposing additional challenges on the dephosphorization process in steelmaking. The most urgent issue in the process of converter steelmaking is how to achieve efficient dephosphorization. In this study, the influence of various factors on the logarithm of the phosphorus balance distribution ratio (lgLp), the logarithm of the P2O5 activity coefficient (lgγP2O5), and the logarithm of the phosphorus capacity (lgCp) were examined through thermodynamic calculations. The impact of each factor on dephosphorization was analyzed, and the optimal conditions for the dephosphorization stage of the converter were determined. Furthermore, the influence of basicity and FetO content on the form of phosphorus in the slag was analyzed using FactSage 7.2 software, and the precipitation rules of the slag phases were explored. The thermodynamic calculation results indicated that increasing the basicity of the dephosphorization slag was beneficial for dephosphorization, but it should be maintained below 3. The best dephosphorization effect was achieved when the FetO content was around 20%. The reaction temperature during the dephosphorization stage should be kept low, as the dephosphorization efficiency decreased sharply with the increasing temperature. In dephosphorization slag, Ca3(PO4)2 usually formed a solid solution with Ca2SiO4, so the form of phosphorus in the slag was mainly determined by the precipitation form and content of Ca2SiO4. The phases in the dephosphorization slag mainly consisted of a phosphorus-rich phase, an iron-rich phase, and a matrix phase. The results of scanning electron microscopy and X-ray diffraction analyses were consistent with the thermodynamic calculation results.

Simultaneous Recovery of Iron and Phosphorus from a High-Phosphorus Oolitic Iron Ore to Prepare Fe-P Alloy for High-Phosphorus Steel Production

Synchronous enrichment of phosphorus and iron from a high-phosphorus oolitic hematite ore to prepare Fe-P alloy by direct reduction-magnetic separation process

Theoretical and Practical Foundations of the Selective Separation of Phosphate Ions from Phosphate Ores with a High Content of Iron Impurities with the Recirculation Method

Recovery of Phosphorite from Coarse Particle Magnetic Ore by Flotation

Direct Reduction of High-Phosphorus Oolitic Hematite: Quantifying Phosphorus Migration and Recovery

Recovery of iron from high phosphorus oolitic iron ore using coal-based reduction followed by magnetic separation

Dephosphorization kinetics of high-P-containing reduced iron produced from oolitic hematite ore

Efficient extraction of phosphate from dephosphorization slag by hydrochloric acid leaching

Iron Recovery and Dephosphorization Behaviors from High-Phosphorus Oolitic Hematite by Gas-Based Direct Reduction and Magnetic Separation

A new iron recovery and dephosphorization approach from unroasted high‐phosphorus oolitic hematite ore via a facile chemical beneficiation process

A Kinetic Study on Selective Leaching of Phosphorus from Dephosphorization Slag

Effect of Calcium Compounds on Direct Reduction and Phosphorus Removal of High-Phosphorus Iron Ore

Separation and recovery of phosphorus from steelmaking slag via a selective leaching–chemical precipitation process

Resource-saving production of Fe-based amorphous alloys from carbothermal reduction of high-phosphorus oolitic iron ore

Study on the Effect of Different Factors on the Change of the Phosphorus-Rich Phase in High Phosphorus Steel Slag

Phosphorus Removal and Iron Recovery from High-Phosphorus Hematite Using Direct Reduction Followed by Melting Separation

A New Route to Upgrading the High-Phosphorus Oolitic Hematite Ore by Sodium Magnetization Roasting-Magnetic Separation-Acid and Alkaline Leaching Process

Selective reduction of iron in high phosphorus oolite ores to production low phosphorus metal

Study on Efficient Dephosphorization in Converter Based on Thermodynamic Calculation

Phosphorus partitioning and recovery of low-phosphorus iron-rich compounds through physical separation of Linz-Donawitz slag

New Dephosphorizing Agent for Phosphorus Removal from High-Phosphorus Oolitic Hematite Ore in Direct Reduction Roasting