Abstract:The possibility of selective reduction of iron in oolite ore with the production of low-phosphorous metal after pyrometallurgical separation of metallized material is shown. To exclude the transition of phosphorus to metal during separation melting, lime was added to the crushed initial ore. The resulting mixture was fired in a Nabertherm muffle furnace in an air atmosphere at a temperature of 1200 °C and a holding time of 1 hour. During firing, iron phosphate is destroyed with the formation of stronger calcium phosphates. Solid-phase metallization of offlussed and non-fluxed oolitic ores was carried out in a Tamman laboratory furnace at a temperature of 1000 °C in a reducing atmosphere containing carbon monoxide CO. The results of the study of the phase composition of metallization products, as well as the chemical composition of the phases are presented. According to the results of the study, only iron is reduced by carbon monoxide CO, and phosphorus remains in the oxide phase. During metallization of the fluxed ore, phosphorus remains in the oxide phase in the form of aluminum and calcium phosphates, iron is reduced to metal. In unfluxed ore, iron is only partially recovered under such conditions and is present in samples in the form of metallic iron, as well as magnetite and fayalite. Phosphorus in the metallized samples is contained in the form of iron, calcium and aluminum phosphate. Experiments on liquid-phase pyrometallurgical separation of metallized samples were carried out in a verti-cal Nabertherm furnace at a temperature of 1600 °C. As a result of the melting of metallized unfluxed ore, metal and slag are practically not separated. Metal and slag samples were obtained from the melting of metallised fluxed ore. X-ray microanalysis shows that the phosphorus content in the metal phase is 0.1 % (wt.), and 0.3 % (wt.) in the slag. The residual amount of iron in the oxide phase after melting of the unfluxed ore is significantly greater than the amount of iron after melting of the offluxed ore.

Selective reduction of iron in high phosphorus oolite ores to production low phosphorus metal

Theoretical and Practical Foundations of the Selective Separation of Phosphate Ions from Phosphate Ores with a High Content of Iron Impurities with the Recirculation Method

Selective solid-phase reduction of iron in phosphorous oolite ores

Selective Reduction of Iron in High-Phosphorus Oolitic Ore from the Lisakovsk Deposit

Synchronous enrichment of phosphorus and iron from a high-phosphorus oolitic hematite ore to prepare Fe-P alloy by direct reduction-magnetic separation process

Dephosphorization kinetics of high-P-containing reduced iron produced from oolitic hematite ore

Recovery of iron from high phosphorus oolitic iron ore using coal-based reduction followed by magnetic separation

Production of Low-Phosphorus Molten Iron from High-Phosphorus Oolitic Hematite Using Biomass Char

Direct Reduction of High-Phosphorus Oolitic Hematite: Quantifying Phosphorus Migration and Recovery

Phosphorus Removal and Iron Recovery from High-Phosphorus Hematite Using Direct Reduction Followed by Melting Separation

Study on Phosphorus Removal of High-Phosphorus Oolitic Hematite by Coal-Based Direct Reduction and Magnetic Separation

Separation of Ferromanganese Ore Components by Reduction with Carbon and Carbon Monoxide

A Novel Process for Separation of Magnetite and Phosphorous Phases from a CaO–SiO2–FeO–P2O5 Slag

Mineralogical and chemical characterization of an oolitic iron ore, and sustainable phosphorus removal

Phosphorus partitioning and recovery of low-phosphorus iron-rich compounds through physical separation of Linz-Donawitz slag

Obtaining of niobium-containing ferroalloys from the Russian ore raw materials

Reducing Roasting of the Niobium–REM Ores of the Chuktukon Deposit with the Production of Phosphorus Cast Iron and Niobium–REM Slag

The Function of Ca(Oh)(2) and Na2co3 As Additive on the Reduction of High-Phosphorus Oolitic Hematite-Coal Mixed Pellets

Preparation of Ferrophosphorus by Synergistic Reduction of Phosphate Rock and Copper Slag: Optimization of Carbon Addition

Industry Test on Phosphorus Removal and Direct Reduction of High-Phosphorus Oolitic Hematite Ore