Abstract:A power monitoring and protection system based on an embedded processor was designed for the junction boxes (JBs) of an experimental seafloor observatory network in China. The system exhibits high reliability, fast response, and high real-time performance. A two-step power management method which uses metal-oxide-semiconductor field-effect transistors (MOSFETs) and a mechanical contactor in series was adopted to generate a reliable power switch, to limit surge currents and to facilitate automatic protection. Grounding fault diagnosis and environmental monitoring were conducted by designing a grounding fault detection circuit and by using selected sensors, respectively. The data collected from the JBs must be time-stamped for analysis and for correlation with other events and data. A highly precise system time, which is necessary for synchronizing the times within and across nodes, was generated through the IEEE 1588 (precision clock synchronization protocol for networked measurement and control systems) time synchronization method. In this method, time packets were exchanged between the grandmaster clock at the shore station and the slave clock module of the system. All the sections were verified individually in the laboratory prior to a sea trial. Finally, a subsystem for power monitoring and protection was integrated into the complete node system, installed in a frame, and deployed in the South China Sea. Results of the laboratory and sea trial experiments demonstrated that the developed system was effective, stable, reliable, and suitable for continuous deep-sea operation.

Use of a Coded Voltage Signal for Cable Switching and Fault Isolation in Cabled Seafloor Observatories

Actively Controllable Switching for Tree Topology Seafloor Observation Networks

Optimal Communication Frequency for Switching Cabled Ocean Networks with Commands Carried over the Power Line.

An Active Node Isolating Method Based on Discrete-Voltage Intervention for Seafloor Observation Network

Technologies of Junction Box for Seafloor Observation Network

Study On The Short Fault Isolation Of Cabled Ocean Observatory

Efforts on Developing the Technologies of Abyssal Cabled Observatory in China

Fault Detection and Isolation Methods in Subsea Observation Networks

Developing a Power Monitoring and Protection System for the Junction Boxes of an Experimental Seafloor Observatory Network.

IEEE 1588 Based Time Synchronization System for a Seafloor Observatory Network

A test system for cabled ocean observatories

An Investigation on Grounding System of AC Single-core Submarine Cable Based on Multi-conductor Analysis Theory

Design and Development of Compact In-cable Seafloor Observation Network Platform

Study on 10 Kvdc Powered Junction Box for A Cabled Ocean Observatory System

Optical polarization-based seismic and water wave sensing on transoceanic cables

Enhanced C-OTDR-Based Online Monitoring Scheme for Long-Distance Submarine Cables

A Double-Node Star Network Coastal Ocean Observatory

Steady-state Electrical Properties and Loss Reduction Measures Analysis for 220 Kv Tunnel Cable System

Chained Data Acquisition and Transmission System Protype for Cabled Seafloor Earthquake Observatory

Advanced Distributed Submarine Cable Monitoring and Environmental Sensing using Constant Power Probe Signals and Coherent Detection

Design and Application of A Junction Box for Cabled Ocean Observatories