Abstract:A power monitoring and protection system based on an embedded processor was designed for the junction boxes (JBs) of an experimental seafloor observatory network in China. The system exhibits high reliability, fast response, and high real-time performance. A two-step power management method which uses metal-oxide-semiconductor field-effect transistors (MOSFETs) and a mechanical contactor in series was adopted to generate a reliable power switch, to limit surge currents and to facilitate automatic protection. Grounding fault diagnosis and environmental monitoring were conducted by designing a grounding fault detection circuit and by using selected sensors, respectively. The data collected from the JBs must be time-stamped for analysis and for correlation with other events and data. A highly precise system time, which is necessary for synchronizing the times within and across nodes, was generated through the IEEE 1588 (precision clock synchronization protocol for networked measurement and control systems) time synchronization method. In this method, time packets were exchanged between the grandmaster clock at the shore station and the slave clock module of the system. All the sections were verified individually in the laboratory prior to a sea trial. Finally, a subsystem for power monitoring and protection was integrated into the complete node system, installed in a frame, and deployed in the South China Sea. Results of the laboratory and sea trial experiments demonstrated that the developed system was effective, stable, reliable, and suitable for continuous deep-sea operation.

An Active Node Isolating Method Based on Discrete-Voltage Intervention for Seafloor Observation Network

Actively Controllable Switching for Tree Topology Seafloor Observation Networks

Use of a Coded Voltage Signal for Cable Switching and Fault Isolation in Cabled Seafloor Observatories

Technologies of Junction Box for Seafloor Observation Network

Fault Detection and Isolation Methods in Subsea Observation Networks

Developing a Power Monitoring and Protection System for the Junction Boxes of an Experimental Seafloor Observatory Network.

Design and Development of Compact In-cable Seafloor Observation Network Platform

Research on Monitor Information System in Seafloor Observatory Network

Research on Load Sensitive Power Conversion Technology of Constant Current Seafloor Observation Network Nodes

Stability Analysis Model for Multi-Node Undersea Observation Networks

Development of Power Management System Based on Seafloor Observatory Network Junction Box

Design and Implementation of the Seabed Dynamic Environment Monitoring System Based on Ocean Observing Network

Key technologies of junction boxes for Chinese experimental ocean observatory networks

Optimal Communication Frequency for Switching Cabled Ocean Networks with Commands Carried over the Power Line.

Flashover Discharge Model of Transmission Lines in Subsea Observation Network

A Load Sensitive Method for Constant Current Seafloor Observatory Based on Multi-module-stack CC/CV Converter

Study On The Short Fault Isolation Of Cabled Ocean Observatory

Numerical Simulation on the Deploying and Recovering Process for A Node of Underwater Wireless Sensor Network

The Xiangshan IOUT Digital Branch Unit

Efforts on Developing the Technologies of Abyssal Cabled Observatory in China

Optimizing Grounding System Design and Loss Reduction Measures Analysis for Submarine Cable Landing Section