Abstract:Submerged floating tunnel (SFT) is a new type of cable-supported structure system for strait crossing. Once the local anchor-cable suddenly fails, it will inevitably cause evident vibration and internal force redistributions of the structure. In order to study the dynamic responses and mechanical behaviors of the SFT subjected to abrupt anchor-cable breakage, a model test is conducted by a set of sensors installed on SFT for cable force, tube displacement and strain measurements. The transient dynamic signals following cable failure are tested and analyzed. Dynamic amplification factor (DAF) and dynamic coefficient (DC) are respectively used to evaluate the impact effect from the cable failure. Meanwhile, finite element simulations are also performed within ABAQUS. The establishments of the finished state of SFT before cable breakage and the dynamic cable failure process are presented both in the model test and FE model. Comparisons between the FE predicted values and the experimental results show a good agreement. On this basis, some influence factors are discussed in different cases of the cable-loss positions and the cable forces of ruptured cable, etc. The results show that the finished state of SFT under dead load (tube redundant buoyancy) after cable-force optimizations is more reasonable than that directly applying dead load without any cable-force adjustments, with more uniform cable force distribution and smaller tube deformation. Although the SFT suffers strong oscillations after sudden cable-breakage incident, no progressive collapse occurs when the safety margin of the rest structure is sufficient. The dynamic effect on remaining cable members due to sudden cable failure can be evaluated by DC method. A DC value of 1.5 is recommended to ensure the safety of SFT anchor-cables. When cable failure happens at the mid span of the tunnel, the deformation of SFT tube is most critical.

Optimizing Grounding System Design and Loss Reduction Measures Analysis for Submarine Cable Landing Section

An Investigation on Grounding System of AC Single-core Submarine Cable Based on Multi-conductor Analysis Theory

Steady-state Electrical Properties and Loss Reduction Measures Analysis for 220 Kv Tunnel Cable System

Performance of Different Grounding Systems of 500 Kv XLPE Long Submarine Cables Based on Improved Multiconductor Analysis Method

Investigation on Loss Reduction Strategies of Single-Core HVAC Submarine Cables

Sheath Loss Calculation and Loss Reduction Analysis of 220 Kv Cable System

Investigation on Steady State Characteristics and Loss Reduction Measures of 220 Kv Power Cables

Grounding System Analysis of 220 Kv Power Cable Lines Installed Underneath a Bridge

Exploring Subsea Dynamics: A Comprehensive Review of Underwater Pipelines and Cables

A Novel Grounding Mode for Enhancing Current Rating of AC Submarine Cables

Transient Performance of Loss Reduction Strategy for Power Cables Installed on the Bridge

Investigation on Circulation Current Calculation and Grounding Methods of Multi-circuit Cables

Simulation Analysis of Grounding Characteristics of Cable Based on ATP-EMTP

Flashover Discharge Model of Transmission Lines in Subsea Observation Network

Dynamic Analysis of Submarine Cable During the Process of Laying Back to the Seabed

Cable Sheath Loss Reduction Strategy Research Based on the Coupled Line Model

Research on identification method of abnormal grounding circulating current in single‐core AC submarine cable

Investigation on Dynamic Response of J-tube Submarine Cable Around Monopile Foundation

Global Responses of Exposed and Suspended Submarine Cables Due to Anchor Dragging

Dynamic Response Analysis for Submerged Floating Tunnel with Anchor-Cables Subjected to Sudden Cable Breakage

Mechanical Behaviors and Experimental Study of Submerged Floating Tunnel Subjected to Local Anchor-Cable Failure