Abstract:Statement of problem: Adaptation between abutment and suprastructure plays a crucial role in the long-term success of implant-supported metal-ceramic crowns. Fabrication methods, the porcelain firing stage, and cementation techniques may affect the marginal adaptation between the crown and abutment. However, the information regarding this issue is sparse. Purpose: The purpose of this in vitro study was to compare marginal fit after the fabrication of cobalt-chromium alloy copings, porcelain firing, and cementation of metal-ceramic restorations that were fabricated with computer-aided design and computer-aided manufacturing (CAD-CAM) milling and direct metal laser sintering techniques. Material and methods: Thirty straight tissue-level titanium abutments were screwed onto implant analogs. All specimens were embedded in acrylic resin and divided into 2 groups according to CAD-CAM milling and direct metal laser sintering fabrication of the metal coping. Fifteen cobalt-chromium implant-supported metal copings were fabricated by using the CAD-CAM milling technique and 15 by using the direct metal laser sintering technique. In both groups, marginal gap measurements between the cobalt-chromium copings and abutments were obtained before (T0) and after the placement of the ceramic veneer (T1) and after cementation (T2) by using a stereomicroscope with a magnification of ×40. The data were statistically evaluated by using 2-way ANOVA and the Tukey post hoc test (α=.05). A t test was used to determine whether there were significant differences between the fabrication techniques (α=.05). Results: A significant difference in the fabrication stages was found in the direct metal laser sintering group. The direct metal laser sintering coping group and porcelain applied direct metal laser sintering group had a statistically lower marginal gap value than the cemented direct metal laser sintering group (P=.021, P=.038). The direct metal laser sintering coping group had a lower marginal gap value than the CAD-CAM milling coping group, although the difference was not statistically significant (P=.216). Conclusions: Porcelain firing and cementation increased the marginal gap between the crown and abutment. No statistically significant differences were found between the direct metal laser sintering and CAD-CAM milling techniques in terms of marginal fit.

Marginal adaptation of crown by national CAD/CAM

Evaluation on the Marginal Adaptation of CAD/CAM Ceramic Crown

Digital measurement method for comparing the absolute marginal discrepancy of three-unit ceramic fixed dental prostheses fabricated using conventional and digital technologies

Effect of Machining Method and Margin Design on the Accuracy and Margin Quality of Monolithic Zirconia Crowns

A Comparison of Three-Dimensional Marginal Adaptation among Three All-Ceramic Crown Systems

Effects of design software program and manufacturing method on the marginal and internal adaptation of esthetic crowns for primary teeth: A microcomputed tomography evaluation

Marginal adaptation and fracture resistance of milled and 3D-printed CAD/CAM hybrid dental crown materials with various occlusal thicknesses

Digital Evaluation of Absolute Marginal Discrepancy: A Comparison of Ceramic Crowns Fabricated with Conventional and Digital Techniques

Comparation of marginal and internal adaption of endocrowns made from three different ceramics in vitro

Influence of impression method and shoulder design on the marginal adaptation of CAD/CAM nanoceramic resin onlay restorations

Evaluation of Cervical Margin Relocation for CAD/CAM Zirconia Crowns Using Different Composite Resin Materials and Cavity Designs: Marginal Gap and Microleakage

Three-Dimensional Analysis of Internal Adaptations of Crowns Cast from Resin Patterns Fabricated Using Computer-Aided Design/Computer- Assisted Manufacturing Technologies

Evaluation of Marginal and Internal Adaptation of Crowns Fabricated with Three Different Zirconia CAD/CAM Materials

The effect of cement and impression methods on the marginal and internal adaptation of the current monolithic blocks - 3D scanning evaluation

Influence of polyether ether ketone coping crown on the adaptation of implant abutment

[Comparative Adaptation of Crowns of Selective Laser Melting and Wax-Lost-casting Method].

Effect of porcelain firing and cementation on the marginal fit of implant-supported metal-ceramic restorations fabricated by additive or subtractive manufacturing methods

Effect of Tooth Preparation Design on Marginal Adaptation of Composite Resin CAD-CAM Onlays

The effect of two preparation designs on the fracture resistance and marginal adaptation of two types of ceramic crowns using CAD/CAM technology (In vitro study)

Effects of the Cervical Marginal Relocation Technique on the Marginal Adaptation of Lithium Disilicate CAD/CAM Ceramic Crowns on Premolars

Effect of cavity depths on the marginal and internal discrepancy of endocrowns in vitro