Abstract:Engine start-stop system is one of the main mechanisms for fuel saving in hybrid electric vehicles (HEVs). During those transient events, especially during engine starts, the engine torque pulsations can be an NVH issue if there is direct mechanical coupling between the engine and the driveline. In addition, engine starts may also result in the interruption of driving torque. The fast torque response of the electric machines provides a possible solution to mitigate the output torque fluctuation. But the effect is limited by the capability of these two electric machines due to the three missions they must satisfy simultaneously, i. e., starting the engine, compensating the torque pulsations and providing the demanded driving torque. To thoroughly understand this problem and propose possible solutions, in this study, we developed an input-split HEV powertrain model with a grounding clutch. The Dynamic Programming (DP) technique is adopted as the optimization approach to investigate the maximum output torque we can have without any torque error during engine starts. At the same time, the relationship between these two conflicting goals is achieved and the optimal solutions can be divided into four parts depending on the driver demand torque, from the minimum engine start time solution to the maximum driver torque demand solution. Based on the DP results, a control algorithm is proposed to achieve smooth and quick mode transition from the EV mode to power-split driving while meeting the driver torque demand.

Modeling and Control of Engine Starting for A Full Hybrid Electric Vehicle Based on System Dynamic Characteristics

Integrated Motion and Powertrain Predictive Control of Intelligent Fuel Cell/Battery Hybrid Vehicles

Study on the Vehicle Controller of Hybrid Electric Vehicle Based on Fuzzy Logic

Analysis and Control of Engine Starting Process Based on a Novel Single-Motor Power-Reflux Hybrid Electric Vehicle

Coordinated Clutch Slip Control for the Engine Start of Vehicles with P2-hybrid Automatic Transmissions

Dynamic Coordinated Control for a Full Hybrid Electric Vehicle with Single Motor

Hierarchical control for a full hybrid vehicle with single motor and double clutches

A Moment-of-Inertia-Driven Engine Start-Up Method Based on Adaptive Model Predictive Control for Hybrid Electric Vehicles With Drivability Optimization

Optimal Engine Starts of an Input-Split Hybrid Electric Vehicle

A Moment-of-Inertia-Driven Engine Start-Up Strategy for Four-Wheel-Drive Hybrid Electric Vehicles

Rule-Based Time-Optimal Engine-Start Coordination Control With a Predesigned Vehicle Acceleration Trajectory in P2 Hybrid Electric Vehicles

The Coordinated Control Strategy of Engine Starting Process in Power Split Hybrid Electric Vehicle Based on Load Observation

The Control Strategy for a New Full Hybrid Powertrain Structure

Torque coordinating robust control of shifting process for dry dual clutch transmission equipped in a hybrid car

Control Strategy for a Full Hybrid Vehicle with Single Motor

Modeling and Simulation of Coordinated Driving and Braking Control for Fuel Cell Hybrid Electric Vehicle

Innovative Design And Coordinated Control Of Multi-Mode Coupling Drive System With A Speed-Up Clutch For Plug-In Hybrid Electric Vehicles

Research on the Control Systems for Hybrid and Electric Powertrains

A Dynamic Coordinated Control Method for Parallel Hybrid Electric Vehicle Based on Model-matching-control

Dynamic characteristic analysis for clutch engagement process of series–parallel hybrid electric vehicle

A Hybrid Controller Design for Parallel Hybrid Electric Vehicle