Abstract:Engine start-stop system is one of the main mechanisms for fuel saving in hybrid electric vehicles (HEVs). During those transient events, especially during engine starts, the engine torque pulsations can be an NVH issue if there is direct mechanical coupling between the engine and the driveline. In addition, engine starts may also result in the interruption of driving torque. The fast torque response of the electric machines provides a possible solution to mitigate the output torque fluctuation. But the effect is limited by the capability of these two electric machines due to the three missions they must satisfy simultaneously, i. e., starting the engine, compensating the torque pulsations and providing the demanded driving torque. To thoroughly understand this problem and propose possible solutions, in this study, we developed an input-split HEV powertrain model with a grounding clutch. The Dynamic Programming (DP) technique is adopted as the optimization approach to investigate the maximum output torque we can have without any torque error during engine starts. At the same time, the relationship between these two conflicting goals is achieved and the optimal solutions can be divided into four parts depending on the driver demand torque, from the minimum engine start time solution to the maximum driver torque demand solution. Based on the DP results, a control algorithm is proposed to achieve smooth and quick mode transition from the EV mode to power-split driving while meeting the driver torque demand.

Analysis and Control of Engine Starting Process Based on a Novel Single-Motor Power-Reflux Hybrid Electric Vehicle

Integrated Motion and Powertrain Predictive Control of Intelligent Fuel Cell/Battery Hybrid Vehicles

Study on the Vehicle Controller of Hybrid Electric Vehicle Based on Fuzzy Logic

Performance evaluation and optimization of a novel plug-in power-reflux hybrid electric vehicle powertrain

A Moment-of-Inertia-Driven Engine Start-Up Method Based on Adaptive Model Predictive Control for Hybrid Electric Vehicles With Drivability Optimization

Optimal Engine Starts of an Input-Split Hybrid Electric Vehicle

Dynamic Coordinated Control for a Full Hybrid Electric Vehicle with Single Motor

Energy management strategy of a novel mechanical–electro–hydraulic power coupling electric vehicle under smooth switching conditions

A Torque Conversion Solution to the Powertrain of Mobile Machine and Its Control Strategy

The Coordinated Control Strategy of Engine Starting Process in Power Split Hybrid Electric Vehicle Based on Load Observation

New Integrated Multilevel Converter for Switched Reluctance Motor Drives in Plug-in Hybrid Electric Vehicles with Flexible Energy Conversion

Research on the Energy Control of a Dual-Motor Hybrid Vehicle During Engine Start-Stop Process

Dynamic coordinated control for hybrid electric vehicles in the process of engine torque abrupt change

Research on electro-hydraulic ratios for a novel mechanical-electro-hydraulic power coupling electric vehicle

Electromechanical Coupling Driving Control for Single-Shaft Parallel Hybrid Powertrain

A Moment-of-Inertia-Driven Engine Start-Up Strategy for Four-Wheel-Drive Hybrid Electric Vehicles

Multi-objective real-time optimization energy management strategy for plug-in hybrid electric vehicle

A study on the drivability of hybrid electric vehicle

Efficient Mode Transition Control for Parallel Hybrid Electric Vehicle with Adaptive Dual-Loop Control Framework

Active Damping Control of Start-up Process for Hybrid Vehicle

Dynamical model of HEV with two planetary gear units and its application to optimization of energy consumption