Abstract:A major problem of additively manufactured parts using laser powder bed fusion (LPBF) is the as-built high surface roughness. The poor surface finishing is detrimental to the mechanical and electrochemical properties of the parts. In this work, we present systematic investigations on surface roughness reduction of LPBF produced nickel-based superalloy Hastelloy X (HX) using electropolishing. The electrolyte used in this study is an environmentally safe deep eutectic solvent (DES) comprising a eutectic mixture of choline chloride and ethylene glycol in a 1:2 M ratio, respectively. Two different groups of LPBF HX parts separated for the purpose of electropolishing the external and internal surface were prepared. The results show that both the external and internal surface roughness can be effectively reduced using electropolishing in DES. For the parts with the external surface electropolished for 5 min, a surface roughness reduction down to 1.2 μm (Ra) with a bright and reflective surface appearance was achieved. This is a significant improvement in comparison to the high as-built surface roughness of 10.3 μm (Ra) with a dull and non-reflective surface appearance. For the internal surface electropolishing, the surface quality of a 3 mm diameter internal channel in an angled LPBF HX cylindrical tube was successfully enhanced. The DES electropolishing efficiency on LPBF HX was investigated using weight reduction as a function of the electropolishing time, and the microstructure of the electropolished LPBF HX was studied. A further improvement of the electrochemical properties for the electropolished surface was revealed by anodic polarization tests and electrochemical impedance tests. The electropolished surface was also revealed to be more hydrophobic than the as-built surface by water contact angle tests, which is beneficial to the corrosion resistance. The findings herein demonstrate the surface quality of the LPBF produced HX can be effectively improved using electropolishing, and also showed the feasibility of using DES as a promising alternative electrolyte to the conventional hazardous acid mixtures.

Scaling Analysis of Current Influence on Hastelloy Surface Roughness in Electro-Polishing Process

Preliminary Study of Disc Hydrodynamic Polishing

Investigation of surface roughness post-processing of additively manufactured nickel-based superalloy Hastelloy X using electropolishing

Investigations on Scan Scale and Other Issues of AFM Measurements for Surface Roughness of Hastelloy C276

A Study on Universal Factor Determining the Evolution of Surface Roughness During Electrochemical Polishing

Parameters optimization of electrolytic plasma polishing of austenitic stainless steel and surface performance analysis

Cfd Modelling of A Novel Hydrodynamic Suspension Polishing Process for Ultra-Smooth Surface with Low Residual Stress

Experimental Investigation of Technological Indicators and Surface Roughness of Hastelloy C-22 after Electrical Discharge Machining Using POCO Graphite Electrodes

Mechanism study of electropolishing from the perspective of etching isotropy

Numerical Simulation of Effect of Different Initial Morphologies on Melt Hydrodynamics in Laser Polishing of Ti6Al4V

Material removal thickness: a universal factor determining the evolution of surface roughness in electrochemical polishing

Effect of electrochemical polishing on surface quality of nickel-titanium shape memory alloy after milling

Optimization of electrolytic plasma polishing process and surface performance analysis for 6061 aluminum alloy

Two-Steps Electrochemical Polishing of Laser Powder Bed Fusion 316L Stainless Steel

An Approach to Modelling of Laser Polishing of Metals

An Investigation into the Deterioration of Copper Surface Quality in Plasma Electrolytic Polishing

Research on the surface characteristics of 42CrMo alloy steel pulse electrochemical machining

Effects of pH Values and H2O2 Concentrations on the Chemical Enhanced Shear Dilatancy Polishing of Tungsten

Microstructure and anodic electrochemical behavior of additive manufactured Hastelloy X alloy via directed energy deposition

Study on Dry-Ice Particle Jet Polishing Process of 316L Stainless Steel Electrode

Damage Evolution and Plastic Deformation Mechanism of Passivation Layer During Shear Rheological Polishing of Polycrystalline Tungsten