Abstract:This experimental study was conducted with a heavy-duty diesel engine fuelled with dimethyl ether (DME). The combustion and emission characteristics of DME engine were investigated. The results show that the peaks of in-cylinder pressure, heat release rate (HRR), pressure rise rate (PRR), and mean gas temperature of the DME engine are lower than those of diesel engines. For DME engines, with increase in the engine load, the diagram of HRR varies from two peaks to a single peak. With increasing engine speed under the same mean effective pressure, the ignition timing is delayed, and the heat release centroid gradually moves away from the top death centre (TDC). The DME engine with an injector of six holes and a Plunger of larger diameter exhibits a good performance owing to a faster diffusion combustion. With increase in fuel delivery advance angle at rated power, the ignition timing advances, and the centroid of the HRR is near the TDC. However, the peak of the HRR is at the same level. The results also show that higher torque and power can be achieved with DME than with diesel fuel operation at full load. At full load, the fuel consumption at low engine speeds with DME is lower than with diesel fuel, and nitrogen oxide emissions of the DME engine decrease markedly. Hydrocarbon emissions reduce while carbon monoxide emission slightly increases. The combustion of the DME engine is free of smoke throughout all the operating points. As DME is an oxygenated fuel, its combustion produces less carbon dioxide than that from diesel combustion. European stationary cycle emission test results show that the emissions from the DME engine are below the limits of the Euro 3 regulations.

An Investigation on Combustion and Exhaust Emissions of Direct Injection Diesel Engine Fuelled with Dimethyl Ether

Study on injection characteristics of diesel and DME

Experimental Investigation on Injection and Combustion of Dimethyl Ether Fueled Diesel Engine

Study on the performance and emissions of a compression ignition engine fuelled with dimethyl ether

Regulated And Nonregulated Emissions From A Dimethyl Ether Powered Compression Ignition Engine

Study on Combustion and Emission Characteristics of a Vehicle Engine Fuelled with Dimethyl Ether

Study of Combustion Characteristics of a Compression Ignition Engine Fuelled with Dimethyl Ether

Study on Combustion Characteristics of DME Fueled Diesel Engine

Study of Combustion and Emission Characteristics of Turbocharged Diesel Engine Fuelled with Dimethylether

Study on Emission Characteristics of Direct Injection Diesel Engine Fueled with Dimethyl Ether

Investigation on the regulated and unregulated emissions of a DME engine under different injection timing

Investigation of the Injection Process and Combustion of A Dimethyl Ether Engine with Different Nozzle Flow Areas

Combustion and performance of heavy-duty diesel engines fuelled with dimethyl ether

Combustion and Emission Characteristics of A Turbocharged Diesel Engine Fuelled with Dimethyl Ether

Investigation On Combustion And Emissions Of Dme/Gasoline Mixtures In A Spark-Ignition Engine

Investigation of the Performances of Diesel Engine Fueled with Dimethyl Ether and Vehicle Driving Tests

Quasi-Dimensional Multizone Combustion Model for Direct Injection Engines Fuelled with Dimethyl Ether

Investigation on Combustion and Emission Characteristic of a Multi-cylinder DI Diesel Engine Powered by DME

Investigation on Emission Characteristics of A Compression Ignition Engine with Oxygenated Fuels and Exhaust Gas Recirculation

Effect Of Dimethoxy-Methane And Exhaust Gas Recirculation On Combustion And Emission Characteristics Of A Direct Injection Diesel Engine

Performance of A Direct Injection Diesel Engine Fuelled with A Dimethyl Ether/Diesel Blend