Abstract:A multidimensional model is adopted to investigate the combustion and emission formation of a dimethyl ether (DME) and methanol dual-fuel homogeneous charge compression ignition engine. The multidimensional model couples with a reduced chemical mechanism so that the heat transfer and in-cylinder turbulence are considered in the combustion modeling. The results show that the calculated results agree well with the experimental results. Both low- and high-temperature reactions take place in some specific locations in the cylinder and then propagate to the entire cylinder. The quasi-low-temperature reaction occurs in the core zone first, and the high-temperature reaction starts from the core zone adjacent to the combustion chamber axis. The main compositions of unburned hydrocarbon (UHC) emissions are the unburned fuels (DME and methanol) and CH2O. The unburned fuels mainly reside in the piston-ring crevice region, and CH2O is mainly from the region next to the cylinder-liner wall. The majority of CO emissions are located in the region near the top surface of the piston. With the increase of the total fuel/air equivalence ratio or the DME proportion, UHC and CO emissions decrease. However, when the total fuel/air equivalence ratio or the DME proportion is too small, CO emissions decrease too. When the maximum average temperature in the cylinder is over 1400 K, both UHC and CO emissions are very low.

Quasi-Dimensional Multizone Combustion Model for Direct Injection Engines Fuelled with Dimethyl Ether

Fuel Injection System Simulation for DME Engine

Simulation on Diesel/DME Mixed Injection System

Study on injection characteristics of diesel and DME

Quasi-Dimensional Multi-Zone Combustion Model for the Prediction of Performance of Dimethyl Ether Engines

Investigation on Mathematical Model and Optimiz ing of Combustion Process for DME (1)-Combustion Model

An Investigation on Combustion and Exhaust Emissions of Direct Injection Diesel Engine Fuelled with Dimethyl Ether

Numerical modelling of DME engine combustion with a quasi-dimensional multi-zone model

Study on the performance and emissions of a compression ignition engine fuelled with dimethyl ether

Experimental Investigation on Injection and Combustion of Dimethyl Ether Fueled Diesel Engine

Study on Combustion and Emission Characteristics of a Vehicle Engine Fuelled with Dimethyl Ether

Study of dimethyl ether homogeneous charge compression ignition combustion process using a multi-dimensional computational fluid dynamics model

Calculation of combustion and emission from HCCI engine fuelled with dimethyl ether

Multidimensional Numerical Simulation on Dimethyl Ether/Methanol Dual-Fuel Homogeneous Charge Compression Ignition (HCCI) Engine Combustion and Emission Processes

Quasi-Dimension Modeling of Performance and Emissions for Direct Injection Diesel Engines

Investigation On Combustion And Emissions Of Dme/Gasoline Mixtures In A Spark-Ignition Engine

Experimental And Numerical Study On Auto-Ignition And Combustion Of Homogeneous Charge Compression Ignition Fueled With Dimethylether

Regulated And Nonregulated Emissions From A Dimethyl Ether Powered Compression Ignition Engine

Study of Combustion Characteristics of a Compression Ignition Engine Fuelled with Dimethyl Ether

Experimental and Numerical Simulation Study on HCCI Combustion in DME Engine

Prediction of Pollutants Emissions and Performance of Direct Injection Diesel Engines with Quasi Dimensional Combustion Model