Abstract:In this study, the microstructural evolution, particularly precipitation behavior, and mechanical properties of cast Al–Li–Cu–Cd–Mn–Zr–Ti alloy during heat treatment are systematically examined. It provides a detailed discussion of the underlying mechanisms involved. After aging at 160 °C for 24 h, the alloy exhibits an excellent combination of strength and elongation, surpassing other cast Al–3Li–2Cu–X alloys reported in the literature. The microstructural evolution and mechanical properties of cast Al–Li–Cu–Cd–Mn–Zr–Ti alloy during heat treatment are investigated systematically. In these findings, it is shown that the as‐cast alloy exhibits fine and equiaxed grains. During the solid solution treatment, Al20Cu2Mn3 dispersoids effectively restrict grain growth, and reducing the solid solution time has a similar effect. Subsequently, the precipitation behavior and its effect on the mechanical properties during the aging process are revealed. Al3(Ti, Zr) particles are uniformly distributed throughout the matrix, acting as nucleation sites for δ′, θ′, and T1 precipitates. Overtime, δ′ precipitates gradually coarsen and decrease in number, and some δ′ precipitates attach to Al3(Ti, Zr) particles, forming core–shell Al3(Li, Ti, Zr) phases. At the same time, plate‐shaped θ′ and T1 precipitates emerge and coarsen. After aging at 160 °C for 24 h, the alloy exhibits an excellent combination of strength (yield strength =293.3 ± 4 MPa, ultimate tensile strength =468.0 ± 3 MPa) and ductility (elongation =9.6 ± 0.4%), surpassing those reported in other cast Al–3Li–2Cu–X alloys. Critically, the underlying mechanisms behind the microstructure and mechanical properties are discussed extensively, providing valuable insights for the advancement of cast Al–Li alloys.

Characterization of the Aging Precipitates of Al-12Si-4Cu-2Ni-0.8Mg-0.2Gd Piston Alloy

The Effect of Al on Microstructure and Properties of Cu-15Ni-8Sn During the Aging

Atomic-scale study on the precipitation behavior of an Al-Zn-Mg-Cu alloy during isochronal aging

Microstructural Evolution and Tensile Properties of Al-Si Piston Alloys during Long-Term Thermal Exposure

Effects of Thermal Exposure on the Microstructure and Mechanical Properties of Al-Si-Cu-Ni-Mg-Gd Alloy

An Insight into the Precipitate Evolution and Mechanical Properties of a Novel High-Performance Cast Al-Li-Cu-Mg-X Alloy

Effects of aging treatment on the precipitation behaviors and mechanical properties of Al-5.0Mg-3.0Zn-1.0Cu cast alloys

Insight into the aging behavior of a novel Al-Li-Cu-Mg alloy

Precipitates evolution and strengthening of Al–Mg2Si alloys containing high-Cu contents during ageing process

Aging Behavior and Precipitate Characterization of Zn-rich Al–Zn–Mg–Cu Alloys with Various Mg and Cu Contents

Microstructure and Precipitate Evolution in Cu-3.2Ni-0.75Si Alloy Processed by Twin-Roll Strip Casting

Effects of Alloying Elements and Temperature on Thermodynamic State and Microstructure of Piston Aluminum Alloy

Precipitation behavior of an Al–Cu–Li–X alloy and competing relationships among precipitates at different aging temperatures

Microstructural Evolution, Precipitation Behavior, and Mechanical Property Response of Cast Al–Li–Cu–Cd–Mn–Zr–Ti Alloy

The natural aging and precipitation hardening behaviour of Al-Mg-Si-Cu alloys with different Mg/Si ratios and Cu additions

Effect of ageing and thermal exposure on microstructure and mechanical properties of a HPDC Al–Si–Cu–Mg alloy

Aging behavior of an Al–Cu–Mg alloy

Microstructural evolution and mechanical properties of the rapidly-solidified and hot-extruded 2196 Al-Li alloy

Effect of Aging Process on Strengthening Phase Particles of 6056 Aluminum Alloy for Bolts

Evolution of precipitation and mechanical properties of high-pressure vacuum die- cast AlSi10MgMn alloy in T5 and T6 heat treated states

Microstructure and Mechanical Properties of Cast Cu-15Ni-8Sn Alloy