Abstract:Mesoporous carbon materials with ultra-thin carbon pore walls and highly dispersed Ni nanoparticles have been successfully prepared by using two different SBA-15 silicas as hard templates and 2,3-dihydroxynaphthalene (DHN) as a carbon precursor. The nickel precursor was a concentrated nickel nitrate hexahydrate [Ni(NO3)(2)center dot 6H(2)O] solution in 2-propanol, which was added to the carbon-silica nanocomposite prior to thermal treatment. The samples studied were analyzed by thermogravimetry (TG), nitrogen adsorption at -196 degrees C, powder X-ray diffraction (XRD), Raman spectroscopy, scanning and transmission electron microscopy (STEM), and in situ electron diffraction X-ray spectroscopy (EDX). While TG analysis revealed carbon contents lower than 30 wt.-%, nitrogen adsorption provided information about the homogeneity of the carbon thin film deposited onto the mesopore walls of the ordered silica templates SBA-15. The templates, carbon-silica nanocomposites, and carbon inverse replicas with nickel nanoparticles exhibit uniform pores, high surface areas, and large pore volumes. Partially graphitic carbon was identified by the presence of a characteristic G band in the Raman spectra, whereas the diffraction peak attributed to the stacking of graphene planes was not observed by powder XRD. The presence of ordered domains in the carbon materials studied was confirmed by small angle XRD and STEM imaging. In addition, the STEM images revealed that the nickel nanoparticles are uniform in size, ca. 3 nm, and are homogeneously dispersed on the tubular carbon walls. A few larger clusters of nickel, ca. 60 nm, present on the external surface, were identified by powder XRD as metallic Ni. The in situ EDX revealed that the small nanoparticles are largely composed of Ni with traces of NiO. Similar nanoparticle dispersions have been reported only for Ni-containing multiwalled carbon nanotubes (CNTs), whereas previously reported ordered mesoporous carbon materials, CMK-3, possess larger Ni/NiO nanoparticles. ((C) Wiley-VCH Verlag GmbH & Co. KGaA, 69451 Weinheim, Germany, 2009)

Preparation and Characteristic of Three-Dimensional NiCo Alloy/carbon Composite Monoliths with Well-Defined Macropores and Mesostructured Skeletons

Rapid one-step synthesis and electrochemical performance of nio/ni with tunable macroporous architectures

Mesoporous Carbon Materials with Ultra‐Thin Pore Walls and Highly Dispersed Nickel Nanoparticles

Structurally Designed Synthesis of Mechanically Stable Poly(benzoxazine-co-resol)-Based Porous Carbon Monoliths and Their Application As High-Performance CO2 Capture Sorbents

Three-dimensionally ordered mesoporous multicomponent (Ni, Mo) metal oxide/N-doped carbon composite with superior Li-ion storage performance

Soft-template Synthesis of Ordered Mesoporous Carbon/nanoparticle Nickel Composites with a High Surface Area

Construction of Macroporous MOF Derived Single Leaf-Like Cellular Skeleton for Boosting Advanced Oxidation Processes

A simple fabrication of mineral supported Ni-NiAl2O4 nanocomposites with a novel transition layer

A binary metal organic framework derived hierarchical hollow Ni3S2/Co9S8/N-doped carbon composite with superior sodium storage performance

Novel solid-state glycine-nitrate combustion for controllable synthesis of hierarchically porous Ni monolith

Facile fabrication of ultrafine CoNi alloy nanoparticles supported on hexagonal N-doped carbon/Al2O3 nanosheets for efficient protein adsorption and catalysis

One-pot Preparation and the Electrochemical Properties of the composite NiCo Bimetallic Organic Framework and Carbon Quantum Dots

Facile Preparation of 3D Hierarchical Coaxial-Cable-like Ni-CNTs@beta-(Ni, Co) Binary Hydroxides for Supercapacitors with Ultrahigh Specific Capacitance

Nickel oxide nanocrystallites embedded within the wall of ordered mesoporous carbon

Nickel Oxide Nanocrystallites Within the Wall of Ordered Mesoporous Carbon CMK-3: Synthesis and Characterization

Designed Functional Systems from Peapod-like Co@Carbon to Co<sub>3</sub>O<sub>4</sub>@Carbon Nanocomposites

Preparation and application of nano-Ni–Co alloy

Construction of Multi-Porous Ni-based Monolithic Catalyst by Combining Wood Carbon and SBA-15 for Strengthening CO2 Methanation

Synthesis, Analysis and Characterization of Bimetallic Oxide NiO@NiCo2O4 Composite Nanoarchitectonics from Metal–organic Framework in Electrode Material

Morphology-Controlled Fabrication Of Hierarchical Mesoporous Nico2o4 Micro-/Nanostructures And Their Intriguing Application In Electrochemical Capacitors

Stabilizing Ni2+ in Hollow Nano MOF/Polymetallic Phosphides Composites for Enhanced Electrochemical Performance in 3D‐printed Micro‐Supercapacitors