Abstract:NiO nanomaterials prepared using a solid–liquid NH3·H2O precipitation method (NiO-NSL) were tested in the catalytic combustion of methane. The NiO-NSL presented a characteristic rod-like nanostructure with a length of about a few hundred nanometers except for a part of the nanoparticles. For comparison, the NiO nanomaterials prepared by the traditional liquid-phase NH3·H2O precipitation method (NiO-NLL) were tested in the same reaction conditions. NiO-NSL exhibited significantly higher methane combustion activity than NiO-NLL and achieved the complete combustion of methane at 390 °C, which was outstanding in non-noble metal-based catalyst. X-ray photoelectron spectroscopy (XPS) and hydrogen-temperature-programmed reduction (H2-TPR) results indicate that the surface Ni2+ content of NiO-NSL was higher than that of NiO-NLL, and the presence of more Ni2+ might be responsible for the enhanced activity. DFT calculations prove that the energy barrier for C–H bond activation on Ni2+ was lower than that on Ni3+, which was consistent with the higher methane catalytic combustion activity of NiO-NSL. In addition, when the precipitating agent was replaced with NaOH and (NH4)2CO3, the generalization of the solid–liquid precipitation method in the preparation of the NiO catalysts was also tested. The results show that the solid–liquid precipitation method proposed in this work was still applicable when NaOH was used as a precipitant. However, with the use of (NH4)2CO3 as a precipitant, the methane catalytic activity of the NiO nanoparticles prepared by the solid–liquid precipitation method was reduced to a certain extent compared with the traditional liquid-phase precipitation method. This research can open up a highly efficient and environmentally friendly method for the synthesis of methane combustion catalysts.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsanm.1c00732?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsanm.1c00732</a>.Stability test results of NiO-NSL (Figure S1); wide-angle XRD patterns of the as-precipitated samples using (NH4)2CO3 as the precipitant and a standard xNiCO3·yNi(OH)2 sample (Figure S2); representative TEM images of the precursors and as-calcined catalysts of the other four samples (Figures S3 and S4); specific performance data of samples in previous research (Table S1); XPS analysis of the other samples (Table S2, Figures S5 and S6); H2-TPR profiles of the other samples (Table S3, Figures S7 and S8); detailed DFT calculation results (Table S4); the surface model used in the calculations (Figure S9) (<a class="ext-link" href="/doi/suppl/10.1021/acsanm.1c00732/suppl_file/an1c00732_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Novel solid-state glycine-nitrate combustion for controllable synthesis of hierarchically porous Ni monolith

Rapid one-step synthesis and electrochemical performance of nio/ni with tunable macroporous architectures

One-step Chemical Vapor Synthesis of Ni/graphene Nanocomposites with Excellent Electromagnetic and Electrocatalytic Properties

Eruption Combustion Synthesis of NiO/Ni Nanocomposites with Enhanced Properties for Dye-Absorption and Lithium Storage.

Preparation and Characteristic of Three-Dimensional NiCo Alloy/carbon Composite Monoliths with Well-Defined Macropores and Mesostructured Skeletons

Porous Hierarchical Nickel Nanostructures and Their Application As a Magnetically Separable Catalyst

3D printing of combustive inks for hierarchically porous electrochemical electrodes

The controllable synthesis of NiO/Ni/C nanosheets via pulsed plasma in ethylene glycol solution for oxygen evolution electrocatalysis

Facile Synthesis of Hierarchically Porous Ni-N-C for Efficient CO 2 Electroreduction to CO

One-step synergistic optimization of hierarchical pore topology and nitrogen dopants in activated coke for efficient catalytic oxidation of nitric oxide

Facile Synthesis of Mono-Dispersive Hierarchical Nickel-Based Microspheres As Potential Catalysts

Facile morphology-controlled synthesis of nickel-coated graphite core–shell particles for excellent conducting performance of polymer-matrix composites and enhanced catalytic reduction of 4-nitrophenol

Atomically Dispersed NiN x Site with High Oxygen Electrocatalysis Performance Facilely Produced via a Surface Immobilization Strategy

Irregularly Shaped NiO Nanostructures for Catalytic Lean Methane Combustion

One-Step Synthesis of Microporous Carbon Monoliths Derived from Biomass with High Nitrogen Doping Content for Highly Selective CO2 Capture.

Functional nano-composite oxides synthesized by environmental-friendly auto-combustion within a micro-bioreactor

Porous Ni/NiO nanohybrids for electrochemical catalytic glucose oxidation

In Situ, Fast, High‐Temperature Synthesis of Nickel Nanoparticles in Reduced Graphene Oxide Matrix

Synthesis of heterointerfaces in NiO/SnO 2 coated nitrogen-doped graphene for efficient lithium storage

A low temperature organic synthesis of monodispersed NiRu nanocrystals for CO 2 methanation

Non-Basic Solution Eco-Routes to Nano-Scale Nio with Different Shapes: Synthesis and Application