Abstract:Underground rock is often subjected to the coupled action of acid sulfate, chloride ion corrosion, and external dynamic disturbance: the degree of corrosion and dynamic load can significantly affect the pore structure and mechanical behavior of rock. To quantify the microscopic pore structure changes and macro-dynamic behavior characteristics of acidified corroded sandstone, first, a mixed acidic solution of NaHSO4 and HCl with different pH values was used for immersion corrosion of sandstone; second, the pore structure of sandstone before and after corrosion was quantitatively evaluated by nuclear magnetic resonance (NMR), dynamic loading tests of corroded sandstone were conducted on an SHPB experimental system and scanning electron microscopy (SEM) was used to observe the morphology of corroded sandstone section; and finally, the mechanism of water–rock interaction and damage and fracture of acid-corroded sandstone were analyzed. The results show that, after acidizing corrosion of sandstone, the macropores increase significantly in number and volume, the boundary of the pore structure tends to be fuzzy; the effective porosity, the number of effective pores, and the total porosity increase significantly; the residual porosity, the number of residual pores, and T2 cut-off value decrease. The proportion accounted for by the elastic stage in stress–strain curves of corroded sandstone is lowered; the proportion accounted for by the plastic yield stage is increased; and post-peak rebound is diminished. With the decrease of pH value, the peak stress on acid-corroded sandstone decreases and the peak strain increases. The peak stress on corroded sandstone is negatively correlated with effective porosity and the number of effective pores, but positively correlated with residual porosity, the number of residual pores, and the T2 cut-off value. The reaction of acidic solution with sandstone minerals causes the free fluid space to increase, the bound fluid space decreases, and the number of pores increases, resulting in a decrease in the dynamic strength of acidified sandstone. The fracture of original sandstone after impact failure has no obvious directionality, and the failure mode of grain is the coexistence of intergranular fracture and trans-granular fracture. The fracture of sandstone after acidizing corrosion is obviously directional after impact damage, and the fracture form is single, which is intergranular fracture. The research results can provide a certain reference for the protection of rock engineering under acidic water chemical environment.

Experimental study on mechanical aging properties of self‐swelling anchorage bolt under chemical corrosion

Experimental study on fatigue performance of corroded high-strength bolts under axial force

Durability of Structural Adhesive Exposed to Marine Environment

Experimental and numerical investigation on the deterioration mechanism for grouted rock bolts subjected to freeze–thaw cycles

Experimental study on the effect of water-induced deterioration on shear properties of bolted rock joints

Experimental study on the corrosion performance of weathering high-strength bolt connections

Anchorage Performance of Geopolymer-Grouted Rock Bolts

Atmospheric corrosion performance of structural steel bolts in the Wenchang marine environment, South China

Chemical–physical–mechanical Stability of MKG Mortars under Sulfate Attacks

Corrosion-induced mechanical properties of shear bolted connections in high-strength weathering steel

Experimental study and stress analysis of rock bolt anchorage performance

State-of-the-art on the anchorage performance of rock bolts subjected to shear load

Study on reasonable anchorage length based on failure mechanism of the bolt anchorage system

Effects of Acid Sulfate and Chloride Ion on the Pore Structure and Mechanical Properties of Sandstone Under Dynamic Loading

Study on the anchoring performance and failure mechanism of basalt/glass hybrid fiber reinforced plastic anchors in coupled environment

Splitting Tensile Mechanical Performance and Mesoscopic Failure Mechanisms of High-Performance Concrete under 10-Year Corrosion from Salt Lake Brine

Experimental study on dynamic mechanical properties of chemically corroded sandstone

Influence of Chemical Corrosion on Pore Structure and Mechanical Properties of Sandstone

Creep and strength characteristics of cemented gangue backfill under coupling effect of load and acid corrosion

Interface bond degradation and damage characteristics of full-length grouted rock bolt in tunnels with high temperature

Experimental Research on the Mechanical Performance of the Bolted Rock under Lateral Impact Load: Effect of Prestress, Body Material, and Anchorage Style