Abstract:Full-length grouted bolts play a crucial role in geotechnical engineering thanks to their excellent stability. However, few studies have been concerned with the degrading performance of grouted rock bolts caused by extensive and continuous heat conduction from surrounding rocks in high-geothermal tunnels buried more than 100 m (temperature from 28 °C to 100 °C). To investigate the damage mechanism, we examined the time-varying behaviors of grouted rock bolts in both constant and variable temperature curing environments and their damage due to the coupling effects of high temperature and humidity through mechanical and micro-feature tests, including uniaxial compression test, pull-out test, computed tomography (CT) scans, X-ray diffraction (XRD) test, thermogravimetric analysis (TGA), etc., and further analyzed the relationship between grout properties and anchorage capability. In order to facilitate a rapid assessment and control of the anchorage performance of anchors in different conditions, results of the interface bond degradation tests were correlated to environment parameters based on the damage model of interfacial bond stress proposed. Accordingly, a thermal hazard classification criterion for anchorage design in high-geothermal tunnels was suggested. Based on the reported results, although high temperature accelerated the early-stage hydration reaction of grouting materials, it affected the distribution and quantity of hydration products by inhibiting hydration degree, thus causing mechanical damage to the anchorage system. There was a significant positive correlation between the strength of the grouting material and the anchoring force. Influenced by the changes in grout properties, three failure patterns of rock bolts typically existed. Applying a hot-wet curing regime results in less reduction in anchorage force compared to the hot-dry curing conditions. The findings of this study would contribute to the design and investigations of grouted rock bolts in high-geothermal tunnels.

Experimental and numerical investigation on the deterioration mechanism for grouted rock bolts subjected to freeze–thaw cycles

Deterioration characteristics of the bond between reinforcement and concrete subjected to freezing-thawing cycles and steel corrosion

Analysis of fracture toughness deterioration and instability model of dangerous rock masses under freeze–thaw cycles

Interface bond degradation and damage characteristics of full-length grouted rock bolt in tunnels with high temperature

Strength degradation characteristics and damage constitutive model of sandstone under freeze–thaw cycles

Experimental study on the effect of water-induced deterioration on shear properties of bolted rock joints

Investigating Mechanical Properties of Cemented Soil under Static and Dynamic Loading after a Freeze-Thaw Cycle

Analytical studying the axial performance of fully encapsulated rock bolts

Experimental Study on the Shear Behavior of the Bonding Interface Between Sandstone and Cement Mortar Under Freeze–Thaw

Experimental investigation on crack coalescence and strength loss of rock-like materials containing two parallel water-filled flaws under freeze–thaw

Study on the deterioration characteristics and mechanism of physical and mechanical properties of natural gypsum rock under freeze–thaw action

Experimental study on mechanical aging properties of self‐swelling anchorage bolt under chemical corrosion

Damage characteristics of shear strength of joints under freeze–thaw cycles

The stability issue of fractured rock mass slope under the influences of freeze–thaw cycle

Study on the mechanical properties of saturated red sandstone under freeze–thaw conditions

Study on mechanical properties and damage mechanism of strongly weathered gneiss under freeze–thaw cycles

Experimental Study on Mechanical Properties and Pore Structure Deterioration of Concrete under Freeze–Thaw Cycles

Multifactor-coupled study on freeze-thaw forces of rocks in cold regions

Research on Mechanical Properties of Rock Mass with Tiny Cracks under FTCs Conditions

Deterioration mechanisms of tuff with surface fractures under freeze–thaw cycles

Stress analysis of full-length grouted bolt under shear deformation of anchor interface