Abstract:It is of great significance to study the influence of freeze–thaw cycles on rock for the prevention and treatment of tunnel diseases in cold regions. Up to 300 freeze–thaw cycles were carried out on red sandstone, and the uniaxial compression and increasing amplitude cyclic loading tests were conducted to investigate its physical and mechanical responses. A damage calculating method is established, and a conceptual model is proposed to illustrate the behaviors of rock subjected to freeze–thaw cycles and increasing amplitude cyclic load. Research results indicate that the porosity of red sandstone increases in a negative exponential manner with the increase of freeze–thaw cycles, while the strength, residual strength, elastic modulus and Poisson's ratio decrease linearly. The strength of red sandstone can reduce by 21.27% when subjected to 300 freeze–thaw cycles. There are three kinds of acoustic emission (AE) patterns before failure, which are early active, medium term active and inactive. The damage considering the coupled effect of freeze–thaw cycles and increasing amplitude cyclic load can be calculated based on the elastic modulus degradation and damage release energy. By using the proposed method, a comparison of damage evolution between uniaxial compression and cyclic loading can be conducted, and the mechanical properties and damage propagation characteristics of rock can be predicted. The more freeze–thaw cycles the rock undergoes, the more microcracks inside it, and the more broken it becomes after failure. As the microcracks inside rock increase gradually, the internal structure of rock progressively becomes loose and brittle, resulting in a decrease in macroscopic mechanical characteristics such as strength and elastic modulus. Rock can be deemed as a system composed of a series of springs with different stiffnesses and lengths. The evolution of strength, elastic modulus and acoustic emission can be expressed by the failure and the uneven deformation between adjacent springs.

Study on the deterioration characteristics and mechanism of physical and mechanical properties of natural gypsum rock under freeze–thaw action

Study on Physical Properties and Energy Evolution of Natural Gypsum Rock under Freeze-thaw Cycles

Study on mechanical properties and damage mechanism of strongly weathered gneiss under freeze–thaw cycles

Strength degradation characteristics and damage constitutive model of sandstone under freeze–thaw cycles

Study on the mechanical properties of saturated red sandstone under freeze–thaw conditions

Effect of freeze–thaw cycle on physical and mechanical properties and damage characteristics of sandstone

Deterioration mechanisms of tuff with surface fractures under freeze–thaw cycles

Investigation of the Multi-Scale Deterioration Mechanisms of Anhydrite Rock Exposed to Freeze–Thaw Environment

Analysis of Damage Characteristics for Skarn Subjected to Freeze-Thaw Cycles Based on Fractal Theory

Analysis of Microscopic Pore Characteristics and Macroscopic Energy Evolution of Rock Materials under Freeze-Thaw Cycle Conditions

Experimental and DEM simulations of the mechanical properties of rock under freeze–thaw cycles

Physical and mechanical characteristics deterioration and crack evolution of sandy mudstone in an open-pit mine under multiple freeze–thaw cycles

Research on Mechanical Properties of Rock Mass with Tiny Cracks under FTCs Conditions

Mechanical properties and failure mechanism of rock-like specimens with arc-shaped flaws under freeze–thaw cycles

Experimental Investigation on the Mechanical Behavior and Damage Evolution Mechanism of Water-Immersed Gypsum Rock

Physical and mechanical characteristics of saturated tuff under the freeze–thaw cycle

Mechanical and acoustic emission characteristics of anhydrite rock under freeze-thaw cycles

Experimental Study on Mechanical Properties and Pore Structure Deterioration of Concrete under Freeze–Thaw Cycles

Experimental Investigation on Fracture Behavior and Mechanical Properties of Red Sandstone Subjected to Freeze–Thaw Cycles

Investigating Mechanical Characteristics of Rocks Under Freeze–Thaw Cycles Using Grain-Based Model

Mechanical Characteristics of Red Sandstone Subjected to Freeze–Thaw Cycles and Increasing Amplitude Cyclic Load