Abstract:Gel polymer electrolytes (GPEs) based on trimethylolpropane trimethylacrylate (TMPTMA) are in situ polymerized using lithium bis(trifluoromethane)sulfonimide (LiTFSI), dimethylcarbonate (DMC) and ionic liquid (IL)-tributylmethylammonium bis(trifluoromethanesulfonyl) imide (N1,4,4,4TFSI). The GPEs presented both the liquid-like ionic transport and solid-like features. The N1,4,4,4TFSI can effectively dissociate the lithium salts to boost ionic transport, and thus delivers a high ionic conductivity of 6.15 × 10−3 S cm−1 at 25 °C. The interfacial resistance between ionic liquid and lithium metals was reduced, resulting in the benign interfacial contact with Li metal electrode. Lithium ion batteries are assembled based on TMPTMA-based cross-linked gel polymer electrolytes (with LiCoO2 as positive electrode and lithium as negative electrode). The results suggest that the GPEs modified with ionic liquid presented improved cycling performance (with a discharge capacity of 111.1 mA h g−1 after 100 cycles) and good capacity retention of 80%. Also, the GPEs hold favorable compatibility with the LiNi0.8Co0.1Mn0.1O2 positive electrode, exhibiting an initial discharge capacity of 183.1 mA h g−1 as well as a stable capacity of beyond 149 mA h g−1 after 100 cycles. The GPEs enable the assembled LiCoO2/Li and Li1.2Ni0.8Co0.1Mn0.1O2/Li batteries for well operating within a wide C rate range (0.1–2.0 C). The improved cycling behaviors can be attributed to the suppressed growth of the cell impedance and stable interface compatibility toward lithium metal negative electrode .

A Rechargeable Li-CO2 Battery with a Gel Polymer Electrolyte.

A Rechargeable Li‐CO2 Battery with a Gel Polymer Electrolyte

A novel gel polymer electrolyte based on trimethylolpropane trimethylacrylate/ionic liquid via in situ thermal polymerization for lithium-ion batteries

Drawing a Pencil‐Trace Cathode for a High‐Performance Polymer‐Based Li–CO2 Battery with Redox Mediator

A Polymer-Reinforced SEI Layer Induced by a Cyclic Carbonate-Based Polymer Electrolyte Boosting 4.45 V LiCoO2 /Li Metal Batteries

Protecting Li-metal anode with ethylenediamine-based layer and in-situ formed gel polymer electrolyte to construct the high-performance Li–CO2 battery

An Ultra-Long Life, High-Performance, Flexible Li–CO2 Battery Based on Multifunctional Carbon Electrocatalysts

A Rechargeable All-Solid-state Li–CO2 Battery Using a Li1.5Al0.5Ge1.5(PO4)3 Ceramic Electrolyte and Nanoscale RuO2 Catalyst

The critical role of in-situ lithium fluoride in gel polymer electrolyte for high-performance rechargeable batteries

In-Situ Formed Phosphorus Modified Gel Polymer Electrolyte with Good Flame Retardancy and Cycling Stability for Rechargeable Lithium Batteries

Engineering a “nanonet”-reinforced polymer electrolyte for long-life Li–O2 batteries

A Cellulose/Polyethylene Oxide Gel Polymer Electrolyte with Enhanced Mechanical Strength and High Ionic Conductivity for Lithium‐Ion Batteries

Rechargeable LiCO 2 Batteries with Graphdiyne as Efficient Metal‐Free Cathode Catalysts

An in-situ cross-linked network PMMA-based gel polymer electrolyte with excellent lithium storage performance

An efficient gel polymer electrolyte for dendrite-free and long cycle life lithium metal batteries

Ultrathin, Compacted Gel Polymer Electrolytes Enable High‐Energy and Stable‐Cycling 4 V Lithium‐Metal Batteries

In Situ Gel Polymer Electrolyte with Rapid Li+ Transport Channels and Anchored Anion Sites for High‐Current‐Density Lithium‐Ion Batteries

High-strength and flexible cellulose/PEG based gel polymer electrolyte with high performance for lithium ion batteries

Cellulose Acetate-Based High-Electrolyte-Uptake Gel Polymer Electrolyte for Semi-Solid-State Lithium-Oxygen Battery with Long-Cycling Stability.

A Biobased Composite Gel Polymer Electrolyte with Functions of Lithium Dendrites Suppressing and Manganese Ions Trapping