Abstract:Silicon carbide nanoparticle-reinforced nickel-based composites（Ni–Si CNP）,with a Si CNPcontent ranged from1 to 3.5 wt%,were prepared using mechanical alloying and spark plasma sintering.In addition,unreinforced pure nickel samples were also prepared for comparative purposes.To characterize the microstructural properties of both the unreinforced pure nickel and the Ni–Si CNPcomposites transmission electron microscopy（TEM） was used,while their mechanical behavior was investigated using the Vickers pyramid method for hardness measurements and a universal tensile testing machine for tensile tests.TEM results showed an array of dislocation lines decorated in the sintered pure nickel sample,whereas,for the Ni–Si CNPcomposites,the presence of nano-dispersed Si CNPand twinning crystals was observed.These homogeneously distributed Si CNPwere found located either within the matrix,between twins or on grain boundaries.For the Ni–Si CNPcomposites,coerced coarsening of the Si CNPassembly occurred with increasing Si CNPcontent.Furthermore,the grain sizes of the Ni–Si CNPcomposites were much finer than that of the unreinforced pure nickel,which was considered to be due to the composite ball milling process.In all cases,the Ni–Si CNPcomposites showed higher strengths and hardness values than the unreinforced pure nickel,likely due to a combination of dispersion strengthening（Orowan effects） and particle strengthening（Hall–Petch effects）.For the Ni–Si CNPcomposites,the strength increased initially and then decreased as a function of Si CNPcontent,whereas their elongation percentages decreased linearly.Compared to all materials tested,the Ni–Si CNPcomposite containing 1.5% Si C was found more superior considering both their strength and plastic properties.

In situ synthesis of nanodiamond reinforced Fe-Ni matrix composites and their properties

In-situ Synthesis of Nanodiamonds Reinforced Iron-Nickel Matrix Nanocomposites and Their Properties

Microstructure and mechanical properties of in-situ nano TiC reinforced Ni-based alloy composites prepared by spark plasma sintering

Microstructures and Tensile Properties of Ultrafine-Grained Ni–（1–3.5） Wt% SiC NP Composites Prepared by a Powder Metallurgy Route

Mechanical properties and tribological behavior of Fe/nano-diamond composite prepared by hot-press sintering

Effect of Nano-Vanadium Nitride on Microstructure and Properties of Sintered Fe-Cu-based Diamond Composites

Effect of Nanodiamond Contents on Microstructure and Properties of Titanium Matrix Nanocomposites with Network Microstructure

High Strength and High Ductility in Nickel Matrix Nanocomposites Reinforced by Carbon Nanotubes and Onion-Like-carbon Hybrid Reinforcements

In-situ TiC and γ′-Ni3(Al,Ti) triggered microstructural modification and strengthening of Ni matrix composite by reactive hot-press sintering pure Ni and Ti2AlC precursor

CNTs/Cu-Ti Composites Fabrication Through the Synergistic Reinforcement of CNTs and in Situ Generated Nano-Tic Particles

Preparation and mechanical properties of TiCx-Ni3(Al,Ti)/Ni composites synthesized from Ni alloy and Ti3AlC2 powders

Preparation and mechanical properties of in situ TiC x –Ni (Si, Ti) alloy composites

Ni composites reinforced with ultrafine and uniform TiCx and Cr3C2 particles in situ: Enhanced properties and a well-matched interface

Single Walled Carbon Nanotubes Reinforced Intermetallic TiNi Matrix Nanocomposites by Spark Plasma Sintering

Preparation and Mechanical Properties of in-situ TiCx/Ni Alloy Composite Materials

Mechanical Alloying and Spark Plasma Sintering of Ni-Al-Ti-B Powders for Fabricating Nanocrystailine (Tib+tib2)/ni-3(Al, Ti) Composite

Fabrication of Al 2 O 3 – Ni – CNTs nanocomposites by co-precipitation of CNTs and Ni nanoparticle on Al 2 O 3 powder and spark plasma sintering

Improving densification and mechanical properties of FeAl/TiC composites by addition of Ni

The microstructural evolution and enhanced mechanical properties of in-situ Ti(C, N)-reinforced CoCrFeNiTi high-entropy alloy composites fabricated via mechanical alloying and spark plasma sintering

Titanium/nanodiamond Nanocomposites: Effect of Nanodiamond on Microstructure and Mechanical Properties of Titanium

Mechanical Properties and Abrasive Wear Behaviors of in Situ Nano-Tic X /Al-Zn-mg-cu Composites Fabricated by Combustion Synthesis and Hot Press Consolidation