Abstract:Silicon carbide nanoparticle-reinforced nickel-based composites（Ni–Si CNP）,with a Si CNPcontent ranged from1 to 3.5 wt%,were prepared using mechanical alloying and spark plasma sintering.In addition,unreinforced pure nickel samples were also prepared for comparative purposes.To characterize the microstructural properties of both the unreinforced pure nickel and the Ni–Si CNPcomposites transmission electron microscopy（TEM） was used,while their mechanical behavior was investigated using the Vickers pyramid method for hardness measurements and a universal tensile testing machine for tensile tests.TEM results showed an array of dislocation lines decorated in the sintered pure nickel sample,whereas,for the Ni–Si CNPcomposites,the presence of nano-dispersed Si CNPand twinning crystals was observed.These homogeneously distributed Si CNPwere found located either within the matrix,between twins or on grain boundaries.For the Ni–Si CNPcomposites,coerced coarsening of the Si CNPassembly occurred with increasing Si CNPcontent.Furthermore,the grain sizes of the Ni–Si CNPcomposites were much finer than that of the unreinforced pure nickel,which was considered to be due to the composite ball milling process.In all cases,the Ni–Si CNPcomposites showed higher strengths and hardness values than the unreinforced pure nickel,likely due to a combination of dispersion strengthening（Orowan effects） and particle strengthening（Hall–Petch effects）.For the Ni–Si CNPcomposites,the strength increased initially and then decreased as a function of Si CNPcontent,whereas their elongation percentages decreased linearly.Compared to all materials tested,the Ni–Si CNPcomposite containing 1.5% Si C was found more superior considering both their strength and plastic properties.

In-situ Synthesis of Nanodiamonds Reinforced Iron-Nickel Matrix Nanocomposites and Their Properties

In situ synthesis of nanodiamond reinforced Fe-Ni matrix composites and their properties

Effects of spark plasma sintering and the nanodiamond amount on titanium-nanodiamond composite properties

Effect of Nanodiamond Contents on Microstructure and Properties of Titanium Matrix Nanocomposites with Network Microstructure

Titanium/nanodiamond Nanocomposites: Effect of Nanodiamond on Microstructure and Mechanical Properties of Titanium

Microstructure and mechanical properties of in-situ nano TiC reinforced Ni-based alloy composites prepared by spark plasma sintering

High Strength and High Ductility in Nickel Matrix Nanocomposites Reinforced by Carbon Nanotubes and Onion-Like-carbon Hybrid Reinforcements

Mechanical properties and tribological behavior of Fe/nano-diamond composite prepared by hot-press sintering

Single Walled Carbon Nanotubes Reinforced Intermetallic TiNi Matrix Nanocomposites by Spark Plasma Sintering

Effect of Nano-Vanadium Nitride on Microstructure and Properties of Sintered Fe-Cu-based Diamond Composites

Microstructure And Mechanical Properties Of Aluminum Matrix Composites With Different Volume Fractions Of Surface-Oxidized Nanodiamonds

Microstructures and Tensile Properties of Ultrafine-Grained Ni–（1–3.5） Wt% SiC NP Composites Prepared by a Powder Metallurgy Route

Preparation of Super-Aligned Carbon Nanotube-Reinforced Nickel-Matrix Laminar Composites with Excellent Mechanical Properties

Mechanical properties of titanium metal matrix nanocomposites reinforced with multiwalled carbon nanotubes, graphene and nanodiamonds prepared by spark plasma sintering

High-strength Al Matrix Composites Reinforced with Uniformly Dispersed Nanodiamonds

Tribological Properties, Thermal Conductivity and Corrosion Resistance of Titanium/nanodiamond Nanocomposites

Fabrication of Al 2 O 3 – Ni – CNTs nanocomposites by co-precipitation of CNTs and Ni nanoparticle on Al 2 O 3 powder and spark plasma sintering

CNTs/Cu-Ti Composites Fabrication Through the Synergistic Reinforcement of CNTs and in Situ Generated Nano-Tic Particles

Novel Synthesizing and Characterization of Copper Matrix Composites Reinforced with Carbon Nanotubes

In Situ Synthesized Nano-Al4c3 Reinforced Aluminum Matrix Composites Via Friction Stir Processing

Fabrication of High-Content Hybrid-Reinforced Al Nanocomposites by In-Situ Reaction of TiO2-decorated CNTs and Matrix