Abstract:With the advantages of high specific energy and high theoretical capacity, lithium‐sulfur batteries are gaining attention in the field of energy storage. However, there are still many difficulties in the practical application. Such as poor electrical conductivity of sulfur, large volume expansion of sulfur, shuttle effect of polysulfide, resulting in rapid capacity decay and poor cycling stability. To solve these problems, in this paper, nitrogen-doped carbon nanotube and layer less montmorillonite composites (NMMT/CNT/S) were prepared by a simple hydrothermal method and used as sulfur carriers for lithium‐sulfur batteries. Due to the high conductivity of carbon nanotubes, the high specific surface area and large number of adsorption sites in montmorillonite, and the ability of nitrogen to increase electrochemical reactivity, the obtained NMMT/CNT/S has excellent electrochemical performance: Initial discharge capacity up to 1122 mAh/g at a current density of 0.5C, initial specific capacity of 1017 mAh/g at a current density of 1C, capacity remaining after 100 cycles 815 mAh/g, the capacity retention rate is 80.1 %. The prepared NMMT/CNT/S cathode material has good magnification performance, at current densities of 0.2, 0.5, 1, 2 and 4C, the average specific capacity was 1085.9, 902.2, 820.4, 681.2 and 526.4 mAh/g, respectively. The initial specific capacity of NMMT/CNT/S at a current density of 2C is 698 mAh/g, capacity remaining 542 mAh/g after 500 cycles of stabilization, with a capacity retention rate of 77.7 %. These results show that the prepared NMMT/CNT/S is a breakthrough development in the application of lithium‐sulfur batteries.

Nitrogen-Doped Carbon Nanotube Forests Planted on Cobalt Nanoflowers As Polysulfide Mediator for Ultralow Self-Discharge and High Areal-Capacity Lithium-Sulfur Batteries.

Cobalt Nanoparticle-Encapsulated Carbon Nanowire Arrays: Enabling the Fast Redox Reaction Kinetics of Lithium-Sulfur Batteries

A Freestanding Flexible Single‐Atom Cobalt‐Based Multifunctional Interlayer Toward Reversible and Durable Lithium‐Sulfur Batteries

Carbon Nanotube-Connected Yolk–Shell Carbon Nanopolyhedras with Cobalt and Nitrogen Doping As Sulfur Immobilizers for High-Performance Lithium–Sulfur Batteries

Nitrogen-Doped Hollow Carbon Polyhedrons With Carbon Nanotubes Surface Layers As Effective Sulfur Hosts For High-Rate, Long-Lifespan Lithium-Sulfur Batteries

Fe-Nx Sites enriched microporous carbon nanoflower planted with tangled bamboo-like carbon nanotube as a strong polysulfides anchor for lithium–sulfur batteries

Embedding cobalt (II, III) oxide nanoparticles into nitrogen-doped carbon nanotubes-grafted hollow polyhedrons as sulfur hosts for ultralong-life lithium-sulfur batteries

Rational Fabrication of Nitrogen and Sulfur Codoped Carbon Nanotubes/MoS2 for High-Performance Lithium-Sulfur Batteries

An Entangled Cobalt–Nitrogen–Carbon Nanotube Array Electrode with Synergetic Confinement and Electrocatalysis of Polysulfides for Stable Li–S Batteries

Promoting the Synergistic Effect of Sulfur Immobilization and Polysulfides Trapping by Nitrogen Functionalized Interconnected Hollow Carbon Nanocages for High-Performance Lithium–sulfur Batteries

Ultrafine NbN Nanoparticle Decorated Nitrogen-Doped Carbon Nanosheets with Efficient Polysulfide Catalytic Conversion for Superior Li-S Batteries

Enhanced Adsorption of Polysulfides on Carbon Nanotubes/Boron Nitride Fibers for High-Performance Lithium-Sulfur Batteries

A Nacre‐Like Carbon Nanotube Sheet for High Performance Li‐Polysulfide Batteries with High Sulfur Loading

Self-Templated Formation of Interlaced Carbon Nanotubes Threaded Hollow Co3S4 Nanoboxes for High-Rate and Heat-Resistant Lithium-Sulfur Batteries.

Boosting the Rate Performance of Li-S Batteries Via Highly Dispersed Cobalt Nanoparticles Embedded into Nitrogen-Doped Hierarchical Porous Carbon

A Nickel‐Decorated Carbon Flower/Sulfur Cathode for Lean‐Electrolyte Lithium–Sulfur Batteries

Facilitation polysulfides adsorption/catalysis by nitrogen/phosphorous co-doped carbon nanofibers networks for advanced lithium/polysulfides batteries

Spinel manganese-cobalt oxide nanospheres anchored on nitrogen-containing carbon nanofibers as a highly efficient redox electrocatalyst in lithium/polysulfides batteries

Incorporating Cobalt Nanoparticles in Nitrogen-Doped Mesoporous Carbon Spheres Through Composite Micelle Assembly for High-Performance Lithium-Sulfur Batteries

Synergistic Regulation of Polysulfides Conversion and Deposition by MOF‐Derived Hierarchically Ordered Carbonaceous Composite for High‐Energy Lithium–Sulfur Batteries

Nitrogen-doped nanotubes and few-layer montmorillonite composites as an effective polysulfides adsorbent for lithium–sulfur batteries