Abstract:Lithium-sulfur (Li-S) battery system shows immense potential as energy storage devices with high energy density. However, the soluble property of polysulfides into the electrolyte during charge/discharge process leads to low sulfur utilization, severe polarization and short cyclic life, which has been a serious obstacle for practical application. How to anchor the polysulfides onto the cathode materials and moreover, enhance its further conversion to the final products, have been important challenges for the utilization of Li-S batteries. Herein, a novel well crystallized nanosized Fe7S8 possessing of a high specific surface area of 55.6 m(2) g(-1) fabricated by a simple microwave-assisted method combined with high temperature pyrolysis technique, is introduced into the S/C composite cathode for the first time. Strong interaction between polysulfides and the Fe7S8 can be realized to relieve the shuttle effect. The redox reaction of polysulfides can also be promoted to reduce electrode polarization. As a result of the enhanced utilization of sulfur, the optimized S@GFS-15 electrode may deliver a high initial discharge capacity of 1307.2 mA h g(-1) at 0.1 C (1 C = 1675 mA h g(-1)) and low decay rates of 0.047% and 0.037% per cycle after 1000 cycles at 1 and 2 C respectively when the sulfur loading is ordinary 1.1 mg cm(-2). Even the sulfur loading rises up to 2.6 mg cm(-2), a large initial discharge specific capacity of 1134.5 mA h g(-1) can be achieved at 0.1 C. After 600 cycles, the specific capacity of 457.3 mA h g(-1) with a relatively small average decay rate of 0.062% per cycle can be obtained. Thus, incorporation of the nanosized Fe7S8 with graphene can help to achieve effective performance improvement route for Li-S batteries. (C) 2019 Elsevier Ltd. All rights reserved.

Fe-Nx Sites enriched microporous carbon nanoflower planted with tangled bamboo-like carbon nanotube as a strong polysulfides anchor for lithium–sulfur batteries

Surface-coated AlF3 Nanolayers Enable Polysulfide Confinement Within Biomass-Derived Nitrogen-Doped Hierarchical Porous Carbon Microspheres for Improved Lithium-Sulfur Batteries

Bimetallic Nanoparticles Decorated Porous Carbon As the Host Material to Enhance the Performance of Lithium-Sulfur Batteries

Nitrogen-Doped Carbon Nanotube Forests Planted on Cobalt Nanoflowers As Polysulfide Mediator for Ultralow Self-Discharge and High Areal-Capacity Lithium-Sulfur Batteries.

Facilitation polysulfides adsorption/catalysis by nitrogen/phosphorous co-doped carbon nanofibers networks for advanced lithium/polysulfides batteries

Self-templating synthesis of prismatic-like N-doped carbon tubes embedded with Fe3O4 as a high-efficiency polysulfide-anchoring-conversion mediator for high performance lithium-sulfur batteries

Enhanced Adsorption of Polysulfides on Carbon Nanotubes/Boron Nitride Fibers for High-Performance Lithium-Sulfur Batteries

(FeO)2FeBO3 nanoparticles attached on interconnected nitrogen-doped carbon nanosheets serving as sulfur hosts for lithium–sulfur batteries

Synergistic effect of selectively etched CoFe and N-doped hollow carbon spheres for high performance lithium-sulfur batteries

Spinel manganese-cobalt oxide nanospheres anchored on nitrogen-containing carbon nanofibers as a highly efficient redox electrocatalyst in lithium/polysulfides batteries

Carbon-coated Mesoporous Fe 3 O 4 Nanospindles with Interconnected Porosities as Polysulfide Mediator for Lithium-Sulfur Batteries

A Nickel‐Decorated Carbon Flower/Sulfur Cathode for Lean‐Electrolyte Lithium–Sulfur Batteries

An Entangled Cobalt–Nitrogen–Carbon Nanotube Array Electrode with Synergetic Confinement and Electrocatalysis of Polysulfides for Stable Li–S Batteries

Coupling highly dispersed Sb2S3 nanodots with nitrogen/sulfur dual-doped porous carbon nanosheets for efficient immobilization and catalysis of polysulfides conversion

Fe, Co-bimetallic doped C3N4 with in-situ derived carbon tube as sulfur host for anchoring and catalyzing polysulfides in lithium-sulfur battery

Fabrication of NiFe-LDHs Modified Carbon Nanotubes as the High-Performance Sulfur Host for Lithium–Sulfur Batteries

Embedding cobalt (II, III) oxide nanoparticles into nitrogen-doped carbon nanotubes-grafted hollow polyhedrons as sulfur hosts for ultralong-life lithium-sulfur batteries

Hypercrosslinked Polymerization Enabled N‐Doped Carbon Confined Fe 2 O 3 Facilitating Li Polysulfides Interface Conversion for Li–S Batteries

Encapsulating Co9S8 nanocrystals into CNT-reinforced N-doped carbon nanofibers as a chainmail-like electrocatalyst for advanced Li-S batteries with high sulfur loading

Nanosized Fe7S8 with High Surface Area As Polysulfide Capturer Combined with Graphene for Li–S Battery Cathode

Three Birds with One Stone: Multifunctional TiN‐MXene‐Co@CNTs Network as Sulfur/Lithium Host for High‐Areal‐Capacity Lithium‐Sulfur Batteries