Abstract:Transmission loss (TL) is a key reference for structure design and noise reduction performance analysis of a muffler. Taken an expansion chamber muffler as an illustration, and based on finite elements method, the interior sound field of the muffler was calculated and analyzed, the transmission loss was virtually measured by three-point method and traditional four-point method under one load condition. Three-point method was to be calculated by measuring the complex sound pressure of two points upstream and one point downstream of the muffler pipe. It can only get the accurate results in the event that the muffler termination was ideal anechoic. Traditional four-point method under one load condition was to be calculated by measuring the complex sound pressure of two points upstream and two points downstream of the muffler pipe at the same time. Compared with three-point method, the transmitted reflected wave downstream from the actual tail pipe effects was taken into account in traditional four-point method, but its coupling effects on the wave upstream were ignored. And the measurement accuracy was obviously influenced by the sound absorption performance of the muffler termination. The lower the sound absorption coefficient of the termination, the worse is the measurement accuracy. So, exact results can not be achieved at low frequencies by adding sound absorption material at the muffler termination. On these bases, in order to eliminate the coupling effects on the wave upstream from the transmitted reflected wave downstream, four-point method under two load conditions was proposed. It calculates transmission loss by combining the complex sound pressure of two points upstream and two points downstream of the muffler pipe under two difference termination conditions, such as an open termination and a total reflection termination. Then the transmission loss of a typical expansion chamber was measured with this method. And the experimental result was well concordant with the theoretical and the finite elements analysis results. At the same time, according to the simulation results of the interior sound field, the arrangement principles of microphones on the muffler pipe were put forward. It was concluded that: the distances from the measurement points to the expanding cross-sections should be longer than the diameter of shrinkable pipe in order to guarantee the well plane wave at the measurement points; the distances between two microphones upstream and downstream should be shorter than half-wavelength of max analysis frequencies in order to avoid the false results (the emergence of jump points) at some special frequencies. These can provide references for the actual measurement of transmission loss.

Normal Incidence Sound Transmission Loss Evaluation with a General Upstream Tube Wave Decomposition Formula.

Acoustic Insertion Loss Measurement Using Time Reversal Focusing

An Improved Approach for Normal-Incidence Sound Transmission Loss Measurement Using a Four-Microphone Impedance Tube

Calculation of Transmission Loss of Mufflers Based on the Method of Acoustic Mode of Pipeline

Measurement of Sound Transmission Loss in an Acoustic Pipe Using Pulse Method

Transmission Loss Measurement of Acoustic Material Using Time-Domain Pulse-Separation Method (L).

Measurement of Transmission Loss of a Muffler Based on Transfer Function

The Measurement Method and Validation of Transmission Loss in the Acoustic Symmetrical Characteristic Muffler

Sound Absorption Measurement in a Circular Tube Using the Echo-Pulse Method

A Method Combining Measurement Tool and Numerical Simulation for Calculating Acoustic Signals of Ultrasonic Flowmeter

In-situ measurement method of sound transmission loss under an oblique incidence of plane wave

An Extended Transfer Matrix Method for Measuring Acoustical Properties of Porous Materials Beyond the Cut-off Frequency.

Simultaneously Measuring Thickness, Density, Velocity and Attenuation of Thin Layers Using V(z,t) Data from Time-Resolved Acoustic Microscopy.

Measurement of transmission loss of muffler based on finite elements virtual experiment

Simultaneous Thickness, Velocity, Density, and Attenuation Measurement of a Thin Layer by Time-Resolved Acoustic Microscopy

A Hybrid Method of Predicting the Acoustical Properties of Multi-Layered Materials

A new technique for the measurement of the normal incidence absorption coefficient using an impedance tube and a single microphone with fixed position

Measurements of the normal incidence sound absorption coefficient for Non-standard sized absorbers in impedance tubes

A Novel Method for Holdup Measurement of Three Phases by an Ultrasonic Device with the Flexible Substrate

Numerical Study of Sound Transmission Loss Using an Indirect Boundary Element Method

Measurement of Transmission Loss of Muffler Based on Corrected Transfer Function