Abstract:In recent years, hybrid fillers with different dimension are frequently used to improve the thermal conductivity of polymer/filler composites. While the combined effect of hybrid filler and orientation on the thermal conductivity of polymer/filler composites has rarely reported. In this work, high density polyethylene (HDPE)/ boron nitride (BN)/carbon nanotubes (CNT) ternary composites were prepared by melt blending then hot rolled to obtain oriented sheets. The thermal conductivity and internal structure of the obtained sheets were investigated and compared with those obtained by hot-pressed sheets with random distributed structure. Two representative systems were used, the one is that BN content is low and forms the isolated dispersions (using HDPE/5BN/CNT composites with 5 wt% of BN as example), the other one is that BN content is high and forms network structure (using HDPE/25BN/CNT composites with 25 wt% of BN as example). For hot-pressed samples, no synergy between BN and CNT was found for HDPE/5BN/CNT system with BN dispersed in isolation in HDPE matrix, while an obvious increase of thermal conductivity was seen for HDPE/25BN/CNT system with BN network formation in HDPE matrix, and a 300% increase of thermal conductivity could be achieved as 3 wt% of CNT was added, compared with that of net HDPE. For hot-rolled samples, an increase of thermal conductivity was observed for both HDPE/5BN/CNT and HDPE/25BN/CNT ternary composites by adding CNT into the composites, suggesting the importance of filler orientation in the enhancement of thermal conductivity in polymer/filler composites with hybrid filler. The combined effect of hybrid filler and orientation could result in a further increase of thermal conductivity and 600% increase of thermal conductivity could be achieved. Finally, based on the analysis of internal structure of prepared samples as obtained by SEM observation, rheology and XRD measurements, a possible mechanism for the enhancement of thermal conductivity via hybrid and orientation was proposed. Our work is important and could shed light for the preparation of polymer composites with super thermal conductivity.

Fabrication of Thermal Conductivity Enhanced Polymer Composites by Constructing an Oriented Three-dimensional Staggered Interconnected Network of Boron Nitride Platelets and Carbon Nanotubes.

Anisotropic thermally conductive flexible polymer composites filled with hexagonal born nitride (h-BN) platelets and ammine carbon nanotubes (CNT-NH2): Effects of the filler distribution and orientation

Bi-directional High Thermal Conductive Epoxy Composites with Radially Aligned Boron Nitride Nanosheets Lamellae

Bridging boron nitride nanosheets with oriented carbon nanotubes by electrospinning for the fabrication of thermal conductivity enhanced flexible nanocomposites

Thermal Conductivity of Polymer-Based Composites with Magnetic Aligned Hexagonal Boron Nitride Platelets.

Polymer composites with enhanced thermal conductivity via oriented boron nitride and alumina hybrid fillers assisted by 3-D printing

Simple and Consecutive Melt Extrusion Method to Fabricate Thermally Conductive Composites with Highly Oriented Boron Nitrides

Highly Thermally Conductive and Flexible Nanocomposites Prepared by Integrating 1D/2D Polyethyleneimine-Modified Boron Nitride

Enhanced composite thermal conductivity by percolated networks of in-situ confined-grown carbon nanotubes

Largely Enhanced Thermal Conductivity of HDPE/boron Nitride/carbon Nanotubes Ternary Composites Via Filler Network-Network Synergy and Orientation

Construction of 3D interconnected boron nitride/carbon nanofiber hybrid network within polymer composite for thermal conductivity improvement

Highly Multifunctional and Thermoconductive Performances of Densely Filled Boron Nitride Nanosheets/Epoxy Resin Bulk Composites

Highly Thermally Conductive Composites with Boron Nitride Nanoribbon Array

Thermally conductive epoxy composites with efficient heat transfer pathways by in-situ growth of CNTs on oriented BNNS

Thermal enhancement by constructing ordered-orienting hybrid network with modified boron nitride, graphene and carbon nanotubes in epoxy composite coatings

Isotropically Ultrahigh Thermal Conductive Polymer Composites by Assembling Anisotropic Boron Nitride Nanosheets into a Biaxially Oriented Network.

Fabrication of Highly Oriented Hexagonal Boron Nitride Nanosheet/elastomer Nanocomposites with High Thermal Conductivity.

Enhanced Thermal Conductivity of Polypropylene/polyamide 6 Composites Via Optimizing the Selective Distribution of H-Bn and NH2-CNTs Hybrid Fillers Within the Co-Continuous Structure

Construction of Oriented Interconnected BNNS Skeleton by Self‐Growing CNTs Leading High Thermal Conductivity

Epoxy composite with significantly improved thermal conductivity by constructing a vertically aligned three-dimensional network of silicon carbide nanowires/ boron nitride nanosheets

A Green and Facile Method to Fabricate Multifunctional and Highly Thermally Conductive Boron Nitride‐based Polymer Composites