Abstract:For enhancing the interfacial adhesion of glass fabric (GF)/epoxy composites, silanized multi‐walled carbon nanotubes (MWCNTs) were used to treat GF surface, where carboxyl MWCNTs were functionalized by silane coupling agents based on the covalent or non‐covalent bonding, followed by the vacuum infusion process of laminated composites.Compared with the control sample, flexural and interlaminar shear strengths of resultant composites were enhanced by about 24% and 22%, respectively, indicating superior mechanical strength for composites; flexural modulus and storage modulus in the glassy state were improved by about 36% and 68%, respectively, suggesting higher stiffness for composites. For enhancing the interfacial adhesion of glass fabric (GF)/epoxy composites, silanized multi‐walled carbon nanotubes (MWCNTs) were used to treat GF surface, where carboxyl MWCNTs were functionalized by silane coupling agents based on the covalent or non‐covalent bonding, followed by the vacuum infusion process of laminated composites. A detailed study was employed to confirm the effects of silanized MWCNTs uniform dispersion and interfacial properties of resultant composites. Making full use of suitable silane coupling agents (γ‐aminopropyltriethoxysilane) treatment, the uniform MWCNTs dispersion and strong fiber/matrix interfacial adhesion could be achieved. Compared with the control sample, flexural and interlaminar shear strengths of resultant composites were enhanced by about 24% and 22%, respectively, indicating superior mechanical strength for composites; flexural modulus and storage modulus in the glassy state were improved by about 36% and 68%, respectively, suggesting higher stiffness for composites; the work of fracture (Wf) under interlaminar shear tests was raised by about 188%, revealing better interlaminar fracture toughness of composites. In addition, glass transition temperature of resultant composites also increased. This work provides a guiding strategy for manufacturing fiber‐reinforced composites requiring adjustable strength, stiffness, and toughness. Highlights Silane coupling agent was grafted on MWCNTs by covalent/non‐covalent bonding. Active groups of silanized MWCNTs induced crosslinking reactions with matrix. Silanized MWCNTs dispersion and glass fiber/matrix adhesion were improved. Strengthening/toughening mechanisms of laminated composites were analyzed.

Design of Electrically Conductive Structural Composites by Modulating Aligned CVD-Grown Carbon Nanotube Length on Glass Fibers.

A Novel Continuous Carbon Nanotube Fiber/carbon Composite by Electrified Preform Heating Chemical Vapor Infiltration

Carbon Nanotube Fibers with Excellent Mechanical and Electrical Properties by Structural Realigning and Densification

Carbon Nanotubes/Graphene-Skinned Glass Fiber Fabric with 3D Hierarchical Electrically and Thermally Conductive Network

Carbon nanotube-decorated glass fibre bundles for cure self-monitoring and load self-sensing of FRPs

Carbon Nanotube/Epoxy Composites Fabricated by Resin Transfer Molding

Synthesis of Glass Fiber-Multiwall Carbon Nanotube Hybrid Structures for High-Performance Conductive Composites

Preparation carbon nanotube-decorated carbon fibers under low pressure for epoxy-based unidirectional hierarchical composites with enhanced interlaminar shear strength

Compressive and Interlaminar Shear Properties of Carbon/carbon Composite Laminates Reinforced with Carbon Nanotube-Grafted Carbon Fibers Produced by Injection Chemical Vapor Deposition

Clothing polymer fibers with well-aligned and high-aspect ratio carbon nanotubes.

Carbon nanotube reinforced fiber / epoxy multi-scale hybrid composites via electrophoretic deposition : processing , characterization and multifunctional properties

Carbon-nanotube-grafted glass-fiber-reinforced composites: Synthesis and mechanical properties

Influence of carbon nanotube extending length on pyrocarbon microstructure and mechanical behavior of carbon/carbon composites

Microstructure and Flexural Properties of Carbon/carbon Composite with In-Situ Grown Carbon Nanotube As Secondary Reinforcement

Effectiveness of short and straight carbon nanotubes on dispersion state and static/dynamic mechanical properties of woven glass fibre-reinforced polymer laminates

Multifunctional MXene/carbon Nanotubes Coated Glass Fiber Sensors for In-Situ Monitoring of Curing Process and Structural Health of Polymeric Composites

Carbon Nanotube Film/Epoxy Composites with High Strength and Toughness

Enhanced interfacial and mechanical properties of glass fabric/epoxy composites via grafting silanized carbon nanotubes onto the fibers

Carbon Nanotube Reinforced Poly(ε-caprolactone)/Epoxy Blends for Superior Mechanical and Self-Sensing Performance in Multiscale Glass Fiber Composites

Evolution of Structural, Electrical, and Mechanical Response of 3D Robust Network and Conducting Mechanically Modified Glass Fabric-Polyester Composites with Devisable 1D VGCNF

Carbon nanotube film engineered fiber reinforced polymer composites