Abstract:Manufacture and characterization results of nanocomposites based on a polyamide 6/polyamide 12 blend and multi‐walled carbon nanotubes. Nanocomposites based on an immiscible blend of polyamide 6 (PA6) and polyamide 12 (PA12) 50/50 wt.% with different contents of multi‐walled carbon nanotubes (MWCNTs) were prepared by extrusion followed by compression molding. These materials have been proved to be electrically conductive in previous investigations for the range of filler content assayed. The morphology of the nanocomposites was analyzed using scanning electron microscopy, both on cryo‐fractured and postmortem uniaxial tensile samples. Rheological measurements were performed along with differential scanning calorimetry, to assess the materials microstructure and thermal transitions. Furthermore, uniaxial tensile tests were carried out to determine mechanical properties such as stiffness, strength, and strain at break and to investigate the effect of MWCNTs on these properties. Finally, fracture tests were also conducted to evaluate how incorporating MWCNTs affected nanocomposites toughening capabilities. The obtained results suggest a notable improvement in the mechanical properties in the nanocomposites with low amounts of nanofiller. This expands their potential applications as conductive polymer composites (CPCs) and positions them as promising multifunctional materials. Highlights CPCs based on a PA blend and MWCNTs were successfully obtained. CNTs strongly affected the blend morphology and rheological properties. CNTs significantly modified the crystallization behavior of PA6. Ductility greatly improved at low CNT contents but decreased at high loadings. Stiffness increased steadily with increasing CNT content.

Synthesis of Glass Fiber-Multiwall Carbon Nanotube Hybrid Structures for High-Performance Conductive Composites

Reducing Dispersity of Mechanical Properties of Carbon Fiber/epoxy Composites by Introducing Multi-Walled Carbon Nanotubes

Polyamide 6 Composites Reinforced with Glass Fibers Modified with Electrostatically Assembled Multiwall Carbon Nanotubes

NYLON 6 COMPOSITES REINFORCED WITH GLASS FIBER/ETHYLENE-MALEIC ANHYDRIDE COPOLYMER/MULTIWALLED CARBON NANOTUBE HYBRID STRUCTURES BY ELECTROSTATICAL ABSORPTION

Preparation and Properties of Melt-Blended Carboxyl Multi-Walled Carbon Nanotubes/pa66 Composite Fibers

Effect of Glass Fiber on the Electrical Resistivities of Polyoxymethylene/maleic Anhydride‐grafted Polyethylene/multiwalled Carbon Nanotube Composites

Design and synthesis of the polyaniline interface for polyamide 66/multi-walled carbon nanotube electrically conductive composites

High Electrical Conductivity of Nylon 6 Composites Obtained with Hybrid Multiwalled Carbon Nanotube/carbon Fiber Fillers

Simultaneous Enhancement of the Conductivity and Toughness for Polyamide 66 Nanocomposites by Regulating the Hydrogen Bond and Introducing Microcellular Structures

Effect of Glass Fiber on the Properties of Electrically Conductive Polyoxymethylene Composites

Effects of Glass Fiber on Electrical Conductivities of Multiwalled Carbon Nanotube-filled Polymer/Thermoplastic Polyurethane Blends

Properties of MWCNT–glass fiber fabric multiscale composites: mechanical properties, interlaminar adhesion, and thermal conductivity

High Strength Conductive Polyamide 6 Nanocomposites Reinforced by Prebuilt Three-Dimensional Carbon Nanotube Networks.

Polyamide 66 fibers synergistically reinforced with functionalized graphene and multi-walled carbon nanotubes

Development of Enhanced Multiwalled Carbon Nanotube (MWCNT) Conductive Polymeric Nanocomposites by Using Acidified Derivative of MWCNT As Dispersant

Fabrication and Properties of Polyamide-6,6-functionalized Carboxylic Multi-walled Carbon Nanotube Composite Fibers

Enhancement in mechanical properties of polyamide 66-carbon fiber composites containing graphene oxide-carbon nanotube hybrid nanofillers synthesized through in situ interfacial polymerization

High Mechanical Performance Composite Conductor: Multi-Walled Carbon Nanotube Sheet/Bismaleimide Nanocomposites

Synergistic effect of Mn 2+ with unzipped carbon nanotubes on enhancement of mechanical properties of polyamide 66

Fabrication and properties of conductive MWCNTs/PA6 composites

Multifunctional nanocomposites based on a polyamide 6/polyamide 12 blend and multi‐walled carbon nanotubes