Abstract:An experimental study of the tensile properties of CNT fibers and their interphasial behavior in epoxy matrices is reported. One of the most promising applications of CNT fibers is their use as reinforcement in multifunctional composites. For this purpose, an increase of the tensile strength of the CNT fibers in unidirectional composites as well as strong interfacial adhesion strength is desirable. However, the mechanical performance of the CNT fiber composites manufactured so far is comparable to that of commercial fiber composites. The interfacial properties of CNT fiber/polymer composites have rarely been investigated and provided CNT fiber/epoxy interfacial shear strength of 14.4 MPa studied by the microbond test.In order to improve the mechanical performance of the CNT fibers, an epoxy compatible coating with nano-dispersed aqueous based polymeric film formers and low viscous epoxy resin, respectively, was applied. For impregnation of high homogeneity, low molecular weight epoxy film formers and polyurethane film formers were used. The aqueous based epoxy film formers were not crosslinked and able to interdiffuse with the matrix resin after impregnation. Due to good wetting of the individual CNT fibers by the film formers, the degree of activation of the fibers was improved leading to increased tensile strength and Young’s modulus. Cyclic tensile loading and simultaneous determination of electric resistance enabled to characterize the fiber’s durability in terms of elastic recovery and hysteresis.The pull-out tests and SEM study reveal different interfacial failure mechanisms in CNT fiber/epoxy systems for untreated and film former treated fibers, on the one hand, and epoxy resin treated ones, on the other hand. The epoxy resin penetrated between the CNT bundles in the reference or film former coated fiber, forming a relatively thick CNT/epoxy composite layer and thus shifting the fracture zone within the fiber. In contrast to this, shear sliding along the

Carbon nanotube reinforced fiber / epoxy multi-scale hybrid composites via electrophoretic deposition : processing , characterization and multifunctional properties

Single Carbon Fiber/Acid-Treated CNT-Epoxy Composites by Electro- Micromechanical Technique and Wettability Test for Dispersion and Self-Sensing

Length-dependent Electrical and Thermal Properties of Carbon Nanotube-Loaded Epoxy Nanocomposites

Reducing Dispersity of Mechanical Properties of Carbon Fiber/epoxy Composites by Introducing Multi-Walled Carbon Nanotubes

Influence of Carbon Nanotube Coatings on Carbon Fiber by Ultrasonically Assisted Electrophoretic Deposition on Its Composite Interfacial Property.

Scalable, roll-to-roll manufacturing of multiscale nanoparticle/fiber composites using electrophoretic deposition: Novel multifunctional in situ sensing applications

Electrophoretic Deposition of Different Carbon Nanoscale Reinforcements on Carbon Fiber Fabrics and Mechanical Properties of the Resulting Hybrid Multi-Scale Epoxy Composites

Interfacial Reinforcement of Hybrid Composite by Electrophoretic Deposition for Vertically Aligned Carbon Nanotubes on Carbon Fiber

Enhanced interfacial properties of hierarchical MXene/CF composites via low content electrophoretic deposition

Functional Interphases with Multi-Walled Carbon Nanotubes in Glass Fibre/epoxy Composites

Coating of Carbon Nanotube Fibers: Variation of Tensile Properties, Failure Behavior and Adhesion Strength

Electrophoretic deposition of carbon nanotubes onto carbon fiber felt for production of carbon/carbon composites with improved mechanical and thermal properties

Carbon Nanotube/carbon Fiber Hybrid Multiscale Composites

Increasing the Tensile Property of Unidirectional Carbon/Carbon Composites by Grafting Carbon Nanotubes Onto Carbon Fibers by Electrophoretic Deposition

Electrophoretic Deposition of Carbon Nanotubes: Recent Progress and Remaining Challenges

Multiscale carbon nanotube-carbon fiber reinforcement for advanced epoxy composites with high interfacial strength

A Single Glass Fiber with Ultrathin Layer of Carbon Nanotube Networks Beneficial to In-Situ Monitoring of Polymer Properties in Composite Interphases

Carbon fiber/epoxy composite property enhancement through incorporation of carbon nanotubes at the fiber-matrix interphase – Part II: Mechanical and electrical properties of carbon nanotube coated carbon fiber composites

Mechanical Properties of Carbon Fiber Reinforced Bisphenol A Dicyanate Ester Composites Modified with Multiwalled Carbon Nanotubes

Mechanical Properties of Carbon Nanotube Fibers Reinforced Epoxy Resin Composite Films Prepared by Wet Winding

Interfacial mechanical properties of carbon nanotube-deposited carbon fiber epoxy matrix hierarchical composites