Abstract:Graphene aerogels have become promising materials in many areas of industry, especially in energy applications due to their superior physical and electrochemical properties. Generally, graphene oxide (GO)-derived aerogels (A) are synthesized by using the hydrothermal method. In this study, both GO and reduced graphene oxide (RGO)-derived aerogels were synthesized by using the sol-gel method coupled with the supercritical carbon dioxide (SCCO2) drying process. It aims to examine the changes in the structure of the final aerogel by changing the amount (0.25-0.5-1% wt.) and type of graphene-based precursor materials used in the synthesis. Physical characterizations of graphene aerogels were conducted using Brunauer-Emmett-Teller (BET) analysis, scanning electron microscope-energy dispersive X-ray (SEM-EDX) analysis, transmission electron microscopy (TEM), micro-Raman spectroscopy, X-ray diffractometer (XRD) to highlight their structural properties. Additionally, X-ray photoelectron spectroscopy (XPS) analyses were performed to determine the oxidation levels on the surface of the RGO-1 aerogel. The cyclic voltammetry (CV) method was used to examine the electrochemical behavior of the graphene aerogels against corrosion. Specific capacitance values of the synthesized materials were calculated before and after corrosion. Furthermore, the surface charge changes that occur after corrosion were examined. GOAs displayed the highest specific capacitance value among graphene aerogels. Notably, the RGOA-1 aerogel exhibited the highest corrosion resistance. The pseudo-capacitive charge ratio of RGOA-1 after corrosion was measured at 0.5 mC cm-2.

Pristine Graphene Aerogels by Room-Temperature Freeze Gelation.

Transparent, Ultraflexible, and Superinsulating Nanofibrous Biocomposite Aerogels Via Ambient Pressure Drying

Graphene oxide aerogel ‘ink’ at room temperature, and ordered structures by freeze casting

Preparation of Anisotropic Aerogels with Pristine Graphene by Heat Flow and Study of Their Effects on Heat Transfer in Paraffin

Freeze-Casting Produces a Graphene Oxide Aerogel with a Radial and Centrosymmetric Structure

3D Printing of Graphene Aerogels.

Highly Elastic Graphene Oxide–epoxy Composite Aerogels Via Simple Freeze-Drying and Subsequent Routine Curing

Freely-shapable fabrication of aerogel patterns and 3D architectures by freeze-assisted transfer printing

(3-Mercaptopropyl)trimethoxysilane-assisted Synthesis of Macro- and Mesoporous Graphene Aerogels Exhibiting Robust Superhydrophobicity and Exceptional Thermal Stability

Facile preparation of graphene aerogel as a thermal insulation material

Reconstruction of Inherent Graphene Oxide Liquid Crystals for Large-Scale Fabrication of Structure-Intact Graphene Aerogel Bulk Toward Practical Applications

Graphene aerogels: part 1 - derived from graphene oxide and thermally reduced graphene oxide via supercritical carbon dioxide drying

Vacuum-Filtration-Assisted Ice-Templated Freeze Drying for Preparing Capacitive Graphene Aerogel for Thermal Management

An Architectural Exfoliated-Graphene Carbon Aerogel with Superhydrophobicity and Efficient Selectivity

Graphene Aerogel Prepared by Thermal Evaporation of Graphene Oxide Suspension Containing Sodium Bicarbonate

Wet-resilient Graphene Aerogel for Thermal Conductivity Enhancement in Polymer Nanocomposites

Enhanced mechanical, thermal, and electric properties of graphene aerogels via supercritical ethanol drying and high-temperature thermal reduction

Effect of cooling rate on the microstructure absorption capacity of oil-based materials of graphene aerogels prepared by freeze casting at ambient pressure

Retarding Ostwald Ripening to Directly Cast 3D Porous Graphene Oxide Bulks at Open Ambient Conditions.

Intrinsically Microstructured Graphene Aerogel Exhibiting Excellent Mechanical Performance and Super-High Adsorption Capacity

Ultralight, Ultraflexible, Anisotropic, Highly Thermally Conductive Graphene Aerogel Films