Abstract:Nowadays, separation of heavy metals from polluted wastewater is one of the most important environmental issues, and various methods have been investigated for treating polluted water and industrial wastewater. Surface adsorption using an inexpensive, biodegradable and environmentally consistent adsorbent can be considered an efficient and cost-effective method. One of these adsorbents is sodium alginate (SA). The purpose of this study was to fabricate composite nanofibers using poly (vinyl alcohol) (PVA) and sodium alginate to remove cadmium metal ion from aqueous solutions. For this purpose, polymer solutions consisting of poly (vinyl alcohol) (10% wt)/sodium alginate (2% wt) with three volume ratios of 0/100, 20/80 and 40/60 were first made, and then nanofibers were produced from the resulting solutions by electro-spinning process. The prepared nanofibers were examined by scanning electron microscopy (SEM) and the synthetic poly (vinyl alcohol)/sodium alginate nanofibers at a ratio of 40/60 were selected as adsorbent. The obtained nanofibers were characterized by Fourier-transform infrared spectroscopy (FTIR). The synthesized adsorbent was used to remove the aqueous solution of cadmium metal; the effect of various parameters such as changes in initial metal ion concentration, pH, temperature, contact time and stirring speed on the adsorption process were investigated, and optimum values of the parameters were obtained. The maximum amount of equilibrium adsorption under optimum experimental conditions was 67.05 mg/gr. The Taguchi experiment design method was used to optimize the three effective factors in the cadmium ion adsorption process. The results of the adsorption process were adapted to different adsorption isotherms such as Langmuir and Freundlich isotherms. The fit of the laboratory data to the Langmuir model was better, and the maximum adsorption capacity through this model was obtained equal to 93.163 mg/g of the adsorbent. Since the performance of an adsorbent depends on the duration of the adsorption process, the kinetics of the adsorption process were investigated by pseudo-first-order equation and pseudo-second-order equation. Moreover, the results indicated that the laboratory data showed a better fit to the pseudo-second-order model. Finally, the thermodynamic perspective was examined, and the process was found to be endothermic and spontaneous. The results showed the optimum values for maximum cadmium uptake.

Enrichment of Cd 2+ from Water with a Calcium Alginate Hydrogel Filtration Membrane

Simple fabrication of Cu2+ doped calcium alginate hydrogel filtration membrane with excellent anti-fouling and antibacterial properties

Ba2+/Ca2+ co-crosslinked alginate hydrogel filtration membrane with high strength, high flux and stability for dye/salt separation

Fluorescent Mg(DBM) 2 -doped alginate nanofibrous membranes for sensitive, quantitative and visible detection of Cd 2+

Selective removals of heavy metals (Pb(2+), Cu(2+), and Cd(2+)) from wastewater by gelation with alginate for effective metal recovery.

Green synthesis of network nanostructured calcium alginate hydrogel and its removal performance of Cd2+ and Cu2+ ions

Fast and Effective Removal of Cadmium Ion from Water Using Chitosan Encapsulated Magnetic Fe 3 O 4 Nanoparticles

Modification of chitosan/calcium alginate/Fe3O4 hydrogel microsphere for enhancement of Cu(II) adsorption

Calcium alginate and barium alginate hydrogel filtration membrane coated on fibers for molecule/ion separation

Separable calcium sulphate modified biochar gel beads for efficient cadmium removal from wastewater

Carrageenan/calcium alginate composite hydrogel filtration membranes for efficient cationic dye separation

Selective Adsorption Of Copper Ion By Copper Ion Templated Alginate Gel

Fabrication of Sodium Alginate Porous Scaffolds for Heavy Metal Ion Removal from Aqueous Solution

Effective Removal of Cyanide and Heavy Metals from an Industrial Electroplating Stream Using Calcium Alginate Hydrogels

Ion Imprinted Sodium Alginate Hydrogel Beads Enhanced with Carboxymethyl Cellulose and β-Cyclodextrin to Improve Adsorption for Cu2+

Alginate production of Pseudomonas strains and its application in preparation of alginate-biomass hydrogel for heavy metal adsorption

Removal of Cd2+ from synthetic wastewater using micellar-enhanced ultrafiltration with hollow fiber membrane

NOVEL MAGNETIC ALGINATE/HYDROXYAPATITE COMPOSITE WITH HIGH-EFFICIENCY CADMIUM-ADSORPTION PERFORMANCE

Effective Removal of Calcium and Magnesium Ions from Water by a Novel Alginate–Citrate Composite Aerogel

Fabrication of nanofibers using sodium alginate and Poly(Vinyl alcohol) for the removal of Cd2+ ions from aqueous solutions: adsorption mechanism, kinetics and thermodynamics

Efficient removal of cadmium ions from water by adsorption on a magnetic carbon aerogel