"Tooth worms", poverty tattoos and dental care conflicts in Northeast Brazil.

M. Nations,Sharmêniade de Araújo Soares Nuto

DOI: https://doi.org/10.1016/S0277-9536(01)00019-3

Social Science & Medicine (1967)

Abstract:

What problem does this paper attempt to address?

Preparation and Performance of Quaternary Ammonium Salt-Containing Methacrylate Copolymer-Based Ultrafiltration Membranes

Zihao Zhao,Yunyun Xue,Yani Jiang,Qianwei Su,Ronglu Cui,Wenhan Yu,Wushang Yang,Liheng Zhu,Lifeng Fang,Baoku Zhu

DOI: https://doi.org/10.1002/app.55921

IF: 3

2024-01-01

Journal of Applied Polymer Science

Abstract:Ultrafiltration (UF) membranes with excellent dye removal and antibacterial activity are highly desired in dye wastewater treatment, and more importantly environmental protection puts high demands on polymeric membrane materials. In this work, three methacrylate copolymers containing quaternary ammonium salt were synthesized to cast UF membranes. The physicochemical property, structural evolution, dye separation, and antibacterial activity of as-prepared membranes were systematically investigated. With increased content of the hydrophilic monomer allyl polypropylene glycol (APPG) in the feed, the wettability and positive charge of the resultant membranes were enhanced. Remarkably, the supporting layer of membranes changed from finger-like pore structure to sponge-like pore structure by increasing APPG content, and the sponge-like membranes showed higher retention rates for dyes (99.78% for victoria blue B, 90.49% for methylene blue, and 97.43% for methyl blue) compared with the finger-like membranes. Besides, the sponge-like membranes exhibited high rejection for vctoria blue B (>99%) in dye/salt mixture and simultaneously low rejection for salts (<10%), indicating effective selective separation to dye/salt mixture, and also achieved easy regeneration. It was also found that increased hydrophilicity and positive charge endowed membranes with better antibacterial activity. This work will provide an alternative for dye/salt selective separation in dye effluent treatment.
Ba2+/Ca2+ co-crosslinked alginate hydrogel filtration membrane with high strength, high flux and stability for dye/salt separation

Ningning Gao,Yue Zhang,Zhenhao Yang,Lijing Xu,Kongyin Zhao,Qingping Xin,Junkui Gao,Junjun Shi,Jin Zhong,Huiguo Wang

DOI: https://doi.org/10.1016/j.cclet.2023.108820

IF: 9.1

2023-07-01

Chinese Chemical Letters

Abstract:Alginate is a natural polysaccharide polymer. Hydrogel filtration membranes prepared from alginate show excellent fouling resistance and controllable separation performance, but poor mechanical properties limit the use of algae hydrogels. In this study, Ba2+/Ca2+ co-crosslinked alginate (Ba/CaAlg) hydrogel membrane was prepared by cross-linking sodium alginate with a blend aqueous solution of barium ions and calcium ions, and the membrane was applied to the separation of dyes/salts from dyeing wastewater. Compared with the CaAlg membrane, the Ba/CaAlg hydrogel membrane exhibited more stable structure, and the mechanical properties and salt tolerance of the membrane were significantly improved. The flux of Ba/CaAlg membrane for methyl blue/sodium chloride mixed solution reached 43.5 L m−2 h−1, which was significantly higher than that of CaAlg membrane. Besides, the Ba/CaAlg membrane showed higher dye rejection (>99.6%) and lower salt rejection (<8.2%). The structure of Ba/CaAlg membrane was preliminarily simulated by molecular dynamics, and the pore size and distribution of the membrane were calculated. The Ba/CaAlg membrane has a broad application prospect in dyes/salts separation.

chemistry, multidisciplinary
Anti-fouling and anti-bacterial graphene oxide/calcium alginate hybrid hydrogel membrane for efficient dye/salt separation

Kongyin Zhao,Min Chen,Yue Zhang,Junping Miao,Jun Jiang,Wenbin Xie,Zhenhao Yang,Ligang Lin,Wei Zhang,Rongrong Chu,Wenxiong Shi,Yunxia Hu,Kongyin Zhao,Min Chen,Yue Zhang,Junping Miao,Jun Jiang,Wenbin Xie,Zhenhao Yang,Ligang Lin,Wei Zhang,Rongrong Chu,Wenxiong Shi,Yunxia Hu

DOI: https://doi.org/10.1016/j.desal.2022.115908

IF: 11.211

2022-09-15

Desalination

Abstract:To improve the mechanical strength, antimicrobial and anti-swelling ability of calcium alginate hydrogel membrane, the graphene oxide/calcium alginate hybrid (GCA-H) hydrogel filtration membrane was prepared by ion cross-linking without organic solvent in this study. Meanwhile, the morphology, structure, and chemical bonding mechanism of membranes were characterized. Furthermore, we also investigated the mechanical strength, swelling behaviors, anti-bacterial, and anti-fouling properties of the GCA-H membrane. Since the excellent hydrophilicity, the GCA-H membrane showed high flux recovery rate (>97 %) based on the alternating filtration tests without cleaning the membrane. It was mentioned that the maximum stress-strain of the GCA-H membrane could reach 1.53 MPa, which was 2.34-fold more than that of the unmodified membrane. Due to the enhanced structure, it was beneficial to design the thinner membrane for further application. Moreover, we evaluated the impact of the operating parameters on dye/salt separation performance in this work. Generally, the rejections of Coomassie brilliant blue (CBB) and NaCl of GCA-H membrane were approximately 99 % and 8 %, respectively. Finally, we summarized the separation factor and nominalized flux for the dye/salt separation. The GCA-H membrane still maintained a good separation efficiency after being placed for 45 days. So the GCA-H membrane has a great potential in the selectivity separation process, which may provide a sustainable strategy for dye recycle.

engineering, chemical,water resources
Calcium alginate and barium alginate hydrogel filtration membrane coated on fibers for molecule/ion separation

Yue Zhang,Kongyin Zhao,Zhenhao Yang,Zhijian Zhang,Zhilong Guo,Rongrong Chu,Wei Zhang,Wenxiong Shi,Jiacheng Li,Ziyi Li,Haiyi Liu,Anhou Xu,Xi Chen

DOI: https://doi.org/10.1016/j.seppur.2021.118761

IF: 8.6

2021-09-01

Separation and Purification Technology

Abstract:Calcium alginate (CaAlg) hydrogel has good anti-pollution performance. However, the self-supporting CaAlg hydrogel filtration membrane is difficult to be batch prepared due to its poor mechanical properties. In this paper, polyester (PET) non-woven fabric, polypropylene (PP) non-woven fabric and polyhydroxybutyrate (PHB) nanofibers were used as support layer to prepare CaAlg composite membranes. A series of studies proved that CaAlg-PET membrane showed higher stability and flux, which revealed that PET non-woven fabric was the best carrier among the three fiber carriers to enhance the various properties of hydrogel. Methyl blue (MB) and sodium chloride (NaCl) were used as the representatives of molecules and ions, respectively. The effects of concentration, operating pressure and temperature on the separation performance of MB/NaCl by CaAlg-PET membrane were investigated. The flux of CaAlg-PET membrane was 19.3 L·m-2·h-1·bar-1, and the membrane showed a high selectivity of 183.4 to MB/NaCl mixture (99.5% rejection of MB and 8.3% rejection of NaCl). Moreover, Barium ion was used to cross-link sodium alginate to prepare barium alginate (BaAlg) hydrogel coated composite membrane (BaAlg-PET) using PET fiber as the carrier. The BaAlg-PET membrane exhibited higher strength, stability, flux and better separation performance than CaAlg-PET membrane. BaAlg-PET membrane exhibited a high flux of above 35.5 L·m-2·h-1·bar-1, and the molecular ion selectivity was 306.3 (99.7% rejection of MB and 8.1% rejection of NaCl). Membrane pore structure and pore size distribution of BaAlg hydrogel membrane were generated by molecular dynamic (MD) simulations. In sum, this work provided a green, economical and expandable new idea and membrane material for the separation of molecules and ions.

engineering, chemical
Simple fabrication of Cu2+ doped calcium alginate hydrogel filtration membrane with excellent anti-fouling and antibacterial properties

Tian Bai,Kongyin Zhao,Zijie Lu,Xuefang Liu,Ze Lin,Mengmeng Cheng,Ziyi Li,Dunwan Zhu,Linhua Zhang

DOI: https://doi.org/10.1016/j.cclet.2020.07.034

IF: 9.1

2021-03-01

Chinese Chemical Letters

Abstract:Herein, copper ion doped calcium alginate (Cu2+/CaAlg) composite hydrogel filtration membranes were prepared by using natural polymer sodium alginate (NaAlg) as raw material. The thermal stability and structure of the composite membranes were characterized by thermogravimetric analysis and infrared spectroscopy. The mechanical strength, anti-fouling performance, hydrophilicity and filtration performance of the membrane were studied. The results show that Cu2+/CaAlg hydrogel membrane has excellent mechanical properties and thermal stability. The anti-swelling ability of the membrane was greatly enhanced by doping Cu2+. After three alternate filtration cycles, the flux recovery rate of Cu2+/CaAlg hydrogel membrane can still reach 85 %, indicating that the membrane has good anti-pollution performance. When the operation pressure was 0.1 MPa, the rejection of coomassie brilliant blue G250 reached 99.8 % with a flux of 46.3 L m−2 h-1, while the Na2SO4 rejection was less than 10.0 %. The Cu2+/CaAlg membrane was recycled after 24 h in the filtration process, and its flux and rejection rate did not decrease significantly, indicating that the hydrogel membrane has long-term application potential. The Cu2+/CaAlg membrane has a wide range of applications prospect in dye desalination, fine separation and biopharmaceutical technology fields.

chemistry, multidisciplinary
Polypropylene non-woven supported calcium alginate hydrogel filtration membrane for efficient separation of dye/salt at low salt concentration

Yue Zhang,Kongyin Zhao,Zhijian Zhang,Huike Xie,Ziyi Li,Ze Lin,Chen Mo,Wendong Yang,Xiaolei Wang,Junfu Wei

DOI: https://doi.org/10.1016/j.desal.2020.114845

IF: 11.211

2021-03-01

Desalination

Abstract:Calcium alginate hydrogel is an eco-friendly material, but its wide application as a self-supporting filtration membrane is severely limited by the weak mechanical properties, which makes it difficult for the large scale preparation and the fixation of the membrane in filtration equipment. In this work, a fiber-reinforced calcium alginate membrane (CaAlg-PP) was prepared by coating calcium alginate (CaAlg) hydrogel on the polypropylene (PP) non-woven fabric treated with ethanol/water (v:v = 1:1) solution. The CaAlg-PP filtration membrane was characterized and used for dye/salt separation under a series of operating conditions. The membrane exhibited the co-operativity of the porous support layer and the CaAlg hydrogel in the compositing process, and also exhibited good pressure resistance, pollution resistance and low anionic dye adsorption efficiency. The optimized CaAlg-PP membrane had a high permeance (e.g. 20.3 L·m−2·h−1 for methyl blue at 0.1 MPa) and high dye rejection (e.g. methyl blue 99.5%), while low salt rejection (e.g. NaCl 7.5%), and the selectivity of methyl blue/NaCl was up to 185. The CaAlg-PP membranes made with simple processes and low-cost materials may provide new strategies for environmentally-friendly and economical low salts-containing wastewater treatment and dye recycling.

engineering, chemical,water resources
Desalination of dye utilizing carboxylated TiO2/calcium alginate hydrogel nanofiltration membrane with high salt permeation

Xiao-lei Wang,Wei Qin,Li-xin Wang,Kong-yin Zhao,Hui-cai Wang,Hong-yu Liu,Jun-fu Wei

DOI: https://doi.org/10.1016/j.seppur.2020.117475

IF: 8.6

2020-12-01

Separation and Purification Technology

Abstract:In order to recover dyes from textile wastewater, a self-supported carboxylated titanium dioxide/calcium alginate (TiO2-COOH/CaAlg) hydrogel nanofiltration membrane was prepared using TiO2-COOH as the reinforcing agent. The Scanning electron microscopy (SEM) and Energy dispersive X-ray (EDX) mapping scanning spectra were employed to characterize the distribution of TiO2-COOH nanoparticles on the membrane surface. The pore size distribution, zeta potential and mechanical performance of the membrane were evaluated. The rejections for single dye solutions, salt solutions and dye/salt mixture solutions were also examined. The results indicate that the TiO2-COOH nanoparticles are dispersed uniformly on the membrane surface. Compared to CaAlg membrane, the tensile strength of 20 wt% TiO2-COOH/CaAlg membrane is enhanced by 328%. At the operating pressure of 0.1 MPa, the rejection ratios of 20 wt% TiO2-COOH/CaAlg membrane for 100 mg/L Brilliant blue G250, Direct black 38 and Congo red are 98.4%, 96.8% and 95.9% respectively, and the permeate flux is about 14.1 L·m−2·h−1. Meanwhile, this membrane possesses the low rejection ratios for inorganic salts (16.1%, 15.6%, 12.3% and 9.0% for MgSO4, Na2SO4, MgCl2 and NaCl, respectively), excellent dye anti-fouling property and good stability in the long-term filtration for dye/salt mixture solution.

engineering, chemical
Adsorbent-Embedded Polymeric Membranes for Efficient Dye-Water Treatment

Junaid Saleem,Zubair Khalid Baig Moghal,Snigdhendubala Pradhan,Ahsan Hafeez,Mohammad Shoaib,Johaina Alahmad,Gordon McKay

DOI: https://doi.org/10.3390/polym16111459

IF: 5

2024-05-23

Polymers

Abstract:Traditional bulk adsorbents, employed for the removal of dyes and metal ions, often face the drawback of requiring an additional filtration system to separate the filtrate from the adsorbent. In this study, we address this limitation by embedding the adsorbent into the polymer matrix through a process involving dissolution–dispersion, spin-casting, and heat-stretching. Selective dissolution and dispersion facilitate the integration of the adsorbent into the polymer matrix. Meanwhile, spin-casting ensures the formation of a uniform and thin film structure, whereas heat-induced stretching produces a porous matrix with a reduced water contact angle. The adsorbent selectively captures dye molecules, while the porous structure contributes to water permeability. We utilized inexpensive and readily available materials, such as waste polyethylene and calcium carbonate, to fabricate membranes for the removal of methylene blue dye. The effects of various parameters, such as polymer-adsorbent ratio, initial dye concentration, and annealing temperature, were investigated. Equilibrium data were fitted to Langmuir, Freundlich, Temkin, and Dubinin–Radushkevich isotherms. The equilibrium data were best represented by the Langmuir isotherm, with maximum adsorption capacity of 35 mg/g and 43 mg/g at 25 °C and 45 °C, respectively. The membranes can be regenerated and recycled with a 97% dye removal efficiency. The study aims to present a template for adsorbent-embedded polymeric membranes for dye removal, in which adsorbent can be tailored to enhance adsorption capacity and efficiency.

polymer science
Advanced microcrystalline nanocellulose-based nanofiltration membranes for the efficient treatment of wastewater contaminated with cationic dyes

El Aziz Elfiky, Aya Abd,Mubarak, Mahmoud F.

DOI: https://doi.org/10.1007/s00289-024-05279-w

IF: 2.843

2024-05-15

Polymer Bulletin

Abstract:This study focuses on the construction of polyvinyl chloride microcrystalline nanocellulose (PVC/NC@TALCM) nanocomposite membranes with titanium gamma aluminate (TGAL) for the adsorption and filtration of the cationic dye MB. The adsorption ability of the nanocomposite membrane was investigated by varying the dosage of the adsorbent, pH, and dye concentration. The PVC-MCNC@TGAL membrane, loaded with 5% titanium aluminate at pH 10, demonstrated a 98.6% removal efficiency for the MB dye using a dead-end filtration system. The adsorption kinetics study revealed that the adsorption process followed pseudo-second-order kinetics, indicating a chemisorption process. The Freundlich isotherm model was found to be more suitable than the Langmuir model based on the R 2 value. Finally, the PVC-MCNC@TGAL nanocomposite membrane was found to be a cost-effective and eco-friendly adsorbent for the removal of MB from industrial wastewater. Additionally, the self-cleaning property of the membrane contributes to sustainability by reducing the usage of chemicals.

polymer science
Autoantibodies to the insulin receptor as a cause of autoimmune hypoglycemia in systemic lupus erythematosus.

D. Moller,R. Ratner,D. Borenstein,S. Taylor

DOI: https://doi.org/10.1016/0002-9343(88)90436-6

1988-02-01

Abstract:
Facile fabrication of a low-cost carboxymethyl cellulose–polyacrylamide composite for the highly efficient removal of cationic dye: optimization, kinetic and reusability

Aseel M. Aljeboree,Haneen H. Ghazi,Shaymaa Abed Hussein,Mohammed Abed Jawad,Shahad Abdulhadi Khuder,Ayad F. Alkaim

DOI: https://doi.org/10.1007/s13738-024-03132-5

2024-11-23

Journal of the Iranian Chemical Society

Abstract:Bio-adsorbents with high adsorption efficiency, sustainability, and reusability are desired in wastewater treatments. Herein, a covalently cross-linked green macroparticle hydrogel biocomposite (AM-AC/CMC-Ca) as a bio-adsorbent was prepared through an acrylamide (AM) reaction with a polysaccharide carboxymethyl cellulose (CMC)-modified activated carbon (AC) and further Ca(II) cross-linking polymerization, with efficient removal of Safranin T (ST) cationic dye. FESFM/EDX, XRD, FTIR, BET, and TGA were used to limit the structure and characteristics of the biocomposite. The effects of the concentration for both AM, CMC, AC, and Ca(II) cross-linked on swelling behavior were studied, which yielded that the maximum swelling ratio (SR%) in distilled water was 3500%. The ST dye adsorption capacity was evaluated, and the results illustrated that (AM-AC/CMC-Ca) biocomposite prepared under the optimized conditions displays a super strong adsorption efficiency of 1558.52 mg/g and almost 100% removal efficiency within 1 h adsorption time at pH 7.6 and 25 °C. They decrease slightly with the decrease in pH 3, and the zero-point charge was determined to be 4.2. The pseudo-first-order, pseudo-second-order, chemisorption, and intra-particle diffusion kinetic models were useful to test the experimental result, the second order exhibited the best fit for the kinetic studies. The equilibrium result was assessed using the Freundlich, Langmuir, and Fritz–Schlender isotherm model, and the Freundlich isotherm best refers to the uptake of ST dye, which suggests that the adsorption of dye in this study onto biocomposite is heterogeneous with multilayers. Thermodynamic parameters indicated that the adsorption of ST dye onto the biocomposite was spontaneous (Δ G < 0), and endothermic (Δ H > 0). Additionally, the biocomposite showed high reusability and regeneration, maintaining an 88.8% removal capacity for ST dye after 6 cycles.

chemistry, multidisciplinary
Electrospinning of Sodium Alginate/Copper Oxide Nanofibrous Composite Membrane and Its Application of Cationic Dye Adsorption

Jinghang Gao,Xuejun Wang,Tao Lou

DOI: https://doi.org/10.1002/slct.202403490

2024-10-29

ChemistrySelect

Abstract:The nanofibrous composite membranes of sodium alginate/copper oxide were obtained by electrospinning. The membranes showed superior adsorption performance toward the cationic dye of methylene blue. Dye wastewater is becoming one of the most significant sources of water pollution, and its impact on human survival is immeasurable. In this study, we successfully synthesized a nanofiber membrane with environmentally friendly and efficient properties using electrospinning of a mixture of sodium alginate (SA) and copper oxide (CuO) nanoparticles, aimed at effective dye removal. The adsorption performance of the SA/CuO nanofiber membrane was evaluated using the cationic dye methylene blue (MB). The maximum adsorption capacity of the nanofiber membrane was increased significantly with the addition of CuO nanoparticles, reaching a maximum value of 1633.4 mg g−1, almost twice as much as that of pure SA membrane. The adsorption kinetics follows the pseudo‐second‐order model, where chemisorption acts as the rate‐limiting step. The adsorption isotherm data indicate that the adsorption is monolayer. The nanofibrous membranes showed better dye removal under an alkaline environment. After four cycles of adsorption/desorption, the MB removal efficiency remained at 70.1% of the original adsorption capacity. The addition of CuO nanoparticles facilitated the adsorption of MB dyes, while the form of the nanofibrous membrane is easily recoverable and reusable. Therefore, the as‐prepared SA/CuO nanofibrous composite membrane is a potentially favorable adsorbent material for wastewater treatment applications.

chemistry, multidisciplinary
Preparation, characterization, and adsorption kinetics of methylene blue dye in sodium alginate hydrogel with improved stability

Jiagen Li,Jiajian Zhang,Qihui Wang,Xiaohong Fu,Guowei Deng

DOI: https://doi.org/10.1007/s00396-023-05072-7

2023-02-24

Abstract:Dye-related water pollution is a worldwide problem. This work describes a facile fabrication of the super-absorbent sodium alginate hydrogel (SA-Ca hydrogel) with improved chemical stability and biocompatibility. By combining the freeze–thaw process with calcium crosslinking, hydrogel with nanopores ranging from 10 to 200 nm was prepared. The SA-Ca hydrogel presents a swelling ratio of 90.6 g·g −1 . The effects of pH, initial concentration of the methylene blue (MB) concentration, amounts of absorbents, and temperature on adsorption capacity are investigated. At optimized conditions, the maximum adsorption capacity can reach 2986 mg·g −1 . The adsorption kinetics are analyzed using different models, and the pseudo-second-order model can be used to describe the kinetic profile. According to the thermodynamic parameters, the MB adsorption processes using SA-Ca hydrogel are favorable, spontaneous, and endothermic. The proposed SA-Ca hydrogel is expected to be an effective absorbent for water treatment without extra pollution.

polymer science,chemistry, physical
Exploring the sustainable elimination of dye using cellulose nanofibrils- vinyl resin based nanofiltration membranes

Ahmed H Ragab,Najla F Gumaah,Aya Abd El Aziz Elfiky,Mahmoud F Mubarak

DOI: https://doi.org/10.1186/s13065-024-01211-5

2024-06-27

Abstract:This study focuses on the development of a novel self-cleaning nanofiltration membrane for the efficient removal of the cationic dye methylene blue (MB) from industrial wastewater. The membrane is composed of vinyl resin (VR), cellulose nanofibrils (CNF), and titanium alpha aluminate (TAAL) nanoparticles.The TAAL loading ranged from 1 to 5 wt%, the pH varied from 5 to 10, and the initial MB concentration ranged from 10 to 50 ppm. Using a dead-end filtration system, the (VR/CNF@TAAL) membrane with 5 wt% TAAL at pH 10 demonstrated excellent performances. It achieved a remarkable 98.6% removal efficiency for 30 ppm MB dye, with a maximum adsorption capacity of 125.8 mg/g. The adsorption kinetics analysis revealed that the process followed the pseudo-second-order model, indicating a chemisorption mechanism. The rate constant was determined to be 1.2732 × 10-3 g mg-1 min-1. The Freundlich isotherm model provided a better fit (R2 = 0.996) than the Langmuir model, suggesting multilayer adsorption on the nanocomposite membrane surface. In addition to its high adsorption and filtration capabilities, the (VR/CNF@TAAL) nanocomposite membrane exhibited cost-effectiveness and environmental friendliness as an adsorbent for MB removal from industrial wastewater. The membrane's self-cleaning property further contributes to sustainability by reducing the need for additional chemical treatments.
Decontamination of methylene blue from aqueous media using alginate‐bonded polyacrylamide/carbon black nanocomposite hydrogel

Seyed Jamaleddin Peighambardoust,Fateh Karimzadeh Halimi,Parisa Mohammadzadeh Pakdel,Hamid Safarzadeh

DOI: https://doi.org/10.1002/pat.6336

IF: 3.348

2024-03-09

Polymers for Advanced Technologies

Abstract:This work synthesized the novel alginate (Alg) based nanocomposite hydrogel using the free radical polymerization method to remove methylene blue (MB) from the aqueous solution. The successful grafting of acrylamide (AAm) monomer onto the alginate backbone was confirmed by the FTIR test. Different carbon black (CB) nanoparticle levels (0–12.5 wt.%) were embedded in a hydrogel matrix to enhance the removal efficiency, and its optimum value was obtained at 7.5 wt.%. FTIR, TGA, BET, and SEM analyses were performed to characterize synthesized adsorbents. TGA results showed that Alg‐g‐poly(AAm)/CB nanocomposite hydrogel has a higher thermal stability than Alg‐g‐poly(AAm) hydrogel. SEM analysis showed that incorporating CB into Alg‐g‐poly(AAm) considerably enhances roughness and surface area. Also, a higher surface area of Alg‐g‐poly(AAm)/CB (2.5 m2/g) was confirmed by BET analysis. The removal efficiency of nanocomposite hydrogel at optimum conditions of pH 6, initial concentration 10 mg/L, temperature 25 °C, and contact time 60 min was calculated at 94.63%. The kinetic and isotherm data were best fitted to pseudo‐second‐order and Langmuir models. The monolayer adsorption capacity for Alg‐g‐poly(AAm) and Alg‐g‐poly(AAm)/CB were calculated at 22.77 and 24.56 mg/g, respectively, showing CB's effectiveness in improving MB adsorption. The thermodynamic study showed that the removal process of MB by both adsorbents is spontaneous and exothermic, and entropy decreases. The synthesized adsorbents showed a good performance in textile wastewater treatment. Finally, it can be concluded that the synthesized adsorbents can be successfully applied for wastewater treatment application.

polymer science
Anti-biofouling membrane coated with polyvinyl alcohol/sodium carboxymethylcellulose/tannic acid hydrogel for efficient dye/salt separation

Xue Yang,Xinyi Chen,Xiaolei Su,Artur Cavaco-Paulo,Hongbo Wang,Jing Su

DOI: https://doi.org/10.1016/j.ijbiomac.2024.136671

Abstract:Biofouling is the most severe challenge for separation membranes. In this study, a metal-organic framework (MOF)-based mixed-matrix membranes (MMMs) with polyvinyl alcohol (PVA)/sodium carboxymethylcellulose (CMC)/tannic acid (TA) hydrogel coating exhibited a comprehensive anti-biofouling property and high efficient for dye/salt separation. For the hydrogel layer, ethanol inhibited the cross-linking of the hydrogen bond between the PVA, CMC and TA, forming a uniform "hydrogel paint" applied to the membrane surface using the coating method. Subsequently, the hydrogen bond was re-established by evaporating the ethanol. The hydrogel coating could form a dense hydrated layer, endowing the membrane with excellent anti-fouling properties, including oil, proteins, and bacteria. For the MOF-based MMMs layer, the skeleton structure of polyvinylidene fluoride anchored the bimetallic MOF crystals to mitigate the phenomenon of "trade-off". The hydrogel-coated MOF-based MMMs showed excellent properties, such as the water permeability was ∼200 Lm-2 h-1, the rejection for Reactive Blue 19 was 100 %, the rejection for NaCl was 10.9 %, and it showed excellent stability for long-term service. Furthermore, the hydrogel-coated MOF-based MMMs presented a significant inhibitory effect on surface bacteria growth. In brief, this paper provided a new insight into preparing hydrogel-coated MOF-based MMMs, which had potential applications in separating dye/salt.
Thin-film composite polyester nanofiltration membrane with high flux and efficient dye/salts separation fabricated from precise molecular sieving structure of β-cyclodextrin

Juan Li,Ji-Lai Gong,Guang-Ming Zeng,Biao Song,Wei-Cheng Cao,Si-Yuan Fang,Si-Qun Tang,Yin Guan,Zi-Kang Tan,Zeng-Ping Chen,Xiao-Qian Mao,Ri-Long Zhu

DOI: https://doi.org/10.1016/j.seppur.2021.119352

IF: 8.6

2021-12-01

Separation and Purification Technology

Abstract:The treatment of dye pollutant and salts by nanofiltration membrane technology usually has the difficulty of low permeability and higher pressure in the case of maintaining a high rejection. In this study, high flux polyester membranes of β-cyclodextrin/trimesoyl chloride - multiwalled carbon nanotubes (β-CD/TMC-MWCNTs) were fabricated on a modified multiwalled carbon nanotubes (MWCNTs) substrate via interfacial polymerization (IP) process. The modified MWCNTs substrate was not only beneficial to modulating the permeation and distribution of aqueous phase monomer (β-cyclodextrin, β-CD), but also in favor of the formation of an ultrathin loose selective polyester active layer due to the porous network structure. The optimization experiments about the reaction time and monomer concentrations were conducted. The experimental results showed that the pure water flux of the as-prepared β-CD/TMC-MWCNTs membrane was 179.93 L m-2h-1 bar-1 (at the pressure of 0.1 MPa) when the reaction time of IP process was 5 min. The single dye removal efficiency of β-CD/TMC-MWCNTs membrane was 97.41% for Brilliant Green (BG) and 96.39% for Congo red (CR), respectively. The removal efficiency of dye/salt mixture by the membrane was above 84% for BG and over 98% for CR, respectively. The results indicated that the membrane had the efficient selective separation performance for the dye/salt mixture benefiting from the special molecular sieving architectures with the precisely intrinsic inner cavity of β-CD/TMC-MWCNTs membrane. Furthermore, the reusability, chlorine resistance, and antifouling ability of the β-CD/TMC-MWCNTs membrane was relatively excellent, and the membrane could effectively remove BG (>93%) and CR (>98%) simultaneously for mixed BG/CR dyes in real water body. These results suggested that the as-prepared β-CD/TMC-MWCNTs membrane had the potential of practical application in dye wastewater treatment.

engineering, chemical
Development of carboxymethyl cellulose-graphene oxide biobased composite for the removal of methylene blue cationic dye model contaminate from wastewater

Eman N. Mohamed,Ahmed I. Abd-Elhamid,Ali A. El-Bardan,Hesham M. A. Soliman,Mohamed S. Mohy-Eldin

DOI: https://doi.org/10.1038/s41598-023-41431-8

IF: 4.6

2023-09-01

Scientific Reports

Abstract:Utilizing Glutaraldehyde crosslinked sodium carboxymethyl cellulose (CMC-GA) hydrogel and its nanographene oxide composite (CMC-GA-GOx), an effective carboxymethyl cellulose-graphene oxide biobased composites adsorbent was developed for the adsorption removal of methylene blue (MB) cationic dye contaminate from industrial wastewater. The CMC-GA-GOx composites developed were characterized using FTIR, RAMAN, TGA, SEM, and EDX analysis instruments. Through batch experiments, several variables affecting the removal of MB dye, including the biocomposites GO:CMC composition, adsorption time, pH and temperature, initial MB concentration, adsorbent dosage, and NaCl concentration, were investigated under different conditions. The maximum dye removal percentages ranged between 93 and 98%. They were obtained using biocomposites CMC-GA-GO 102 with 20% GO weight percent, adsorption time 25 min, adsorption temperature 25 °C, MB concentrations 10–30 ppm, adsorption pH 7.0, and 0.2 g adsorbent dose. The experimental data of the adsorption process suit the Langmuir isotherm more closely with a maximal monolayer adsorption capacity of 76.92 mg/g. The adsorption process followed the kinetic model of pseudo-second order. The removal of MB was exothermic and spontaneous from a thermodynamic standpoint. In addition, thermodynamic results demonstrated that adsorption operates most effectively at low temperatures. Finally, the reusability of the developed CMC-GA-GO 102 has been proved through 10 successive cycles where only 14% of the MB dye removal percentage was lost. These results suggest that the developed CMC-GA-GO 102 composite may be an inexpensive and reusable adsorbent for removing organic cationic dyes from industrial wastewater.

multidisciplinary sciences
Effect of solvent upon utilization of beta-carotene for vitamin A storage.

E. Callison,E. Orent-Keiles

Abstract:
Preparation and characterization of a bi-layered nano-filtration membrane from a chitosan hydrogel and bacterial cellulose nanofiber for dye removal

Cai Zhijiang,Xiong Ping,Zhu Cong,Zhai Tingting,Guo Jie,Zhao Kongyin

DOI: https://doi.org/10.1007/s10570-018-1914-0

IF: 6.123

2018-06-30

Cellulose

Abstract:A novel nanofiber composite nano-filtration membrane was prepared by combination of grafting, electrospinning and surface coating. First, carboxyl multi-walled carbon nanotubes were grafted onto bacterial cellulose molecular chains by solution reaction. The grafting products were characterized by TEM, FTIR, Raman, XPS and TGA measurements. Then, they were electrospun into nanofibers to be the supporting layer, and a coating of denser chitosan hydrogel thin film was used as the barrier layer. The morphology of the electrospun nanofibers and composite membrane were observed by SEM. The mechanical behavior of the composite membrane was investigated in dry and wet state. The filtration properties were evaluated in term of the pure water flux (PWF), dye rejection rate and anti-fouling properties. Results showed that the chitosan hydrogel coated electrospun nanofiber composite membrane had higher tensile strength and Young’s Modulus with the value of 11.75, 10.11 and 244, 211 MPa in dry and wet state, respectively. The PWF was increased from 52.1 to 140.7 L/m2 h with the operation pressure increasing from 0.1 to 0.6 MPa. Direct Orange S, Procion Red mx-5B, Stilbene Yellow and Methylene Blue with molecular weight ranged from 300 to 800 g/mol were selected for dye removal test. The rejection rate could maintain over 90% for dyes with the molecular weight larger than 600 g/mol under 0.5 MPa. The chitosan hydrogel coated electrospun nanofiber composite membrane exhibited good anti-fouling properties for both oil and protein. These results indicate that these membranes are efficient for dye removal from wastewater, with high flux and rejection rate at high pressure.

materials science, textiles,polymer science, paper & wood

"Tooth worms", poverty tattoos and dental care conflicts in Northeast Brazil.

Preparation and Performance of Quaternary Ammonium Salt-Containing Methacrylate Copolymer-Based Ultrafiltration Membranes

Ba2+/Ca2+ co-crosslinked alginate hydrogel filtration membrane with high strength, high flux and stability for dye/salt separation

Anti-fouling and anti-bacterial graphene oxide/calcium alginate hybrid hydrogel membrane for efficient dye/salt separation

Calcium alginate and barium alginate hydrogel filtration membrane coated on fibers for molecule/ion separation

Simple fabrication of Cu2+ doped calcium alginate hydrogel filtration membrane with excellent anti-fouling and antibacterial properties

Polypropylene non-woven supported calcium alginate hydrogel filtration membrane for efficient separation of dye/salt at low salt concentration

Desalination of dye utilizing carboxylated TiO2/calcium alginate hydrogel nanofiltration membrane with high salt permeation

Adsorbent-Embedded Polymeric Membranes for Efficient Dye-Water Treatment

Advanced microcrystalline nanocellulose-based nanofiltration membranes for the efficient treatment of wastewater contaminated with cationic dyes

Autoantibodies to the insulin receptor as a cause of autoimmune hypoglycemia in systemic lupus erythematosus.

Facile fabrication of a low-cost carboxymethyl cellulose–polyacrylamide composite for the highly efficient removal of cationic dye: optimization, kinetic and reusability

Electrospinning of Sodium Alginate/Copper Oxide Nanofibrous Composite Membrane and Its Application of Cationic Dye Adsorption

Preparation, characterization, and adsorption kinetics of methylene blue dye in sodium alginate hydrogel with improved stability

Exploring the sustainable elimination of dye using cellulose nanofibrils- vinyl resin based nanofiltration membranes

Decontamination of methylene blue from aqueous media using alginate‐bonded polyacrylamide/carbon black nanocomposite hydrogel

Anti-biofouling membrane coated with polyvinyl alcohol/sodium carboxymethylcellulose/tannic acid hydrogel for efficient dye/salt separation

Thin-film composite polyester nanofiltration membrane with high flux and efficient dye/salts separation fabricated from precise molecular sieving structure of β-cyclodextrin

Development of carboxymethyl cellulose-graphene oxide biobased composite for the removal of methylene blue cationic dye model contaminate from wastewater

Effect of solvent upon utilization of beta-carotene for vitamin A storage.

Preparation and characterization of a bi-layered nano-filtration membrane from a chitosan hydrogel and bacterial cellulose nanofiber for dye removal