Abstract:To obtain cheap and environmentally friendly adsorbents, an attapulgite hydroxyapatite composite (HAA) was prepared via a co-precipitation method with attapulgite as the matrix. Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM) were used for material characterization. The isothermal, thermodynamics, factors experiments (pH, anions), kinetics, and competitive adsorption were studied. The formation of Ca (II) and rate equation were used to explain the mechanism of adsorption and mechanism of anionic action. The data showed that the adsorption was well described by the Langmuir model and quasi-second-order kinetics model. Thermodynamic parameters (ΔH0 > 0, ΔS0 > 0, ΔG0 < −20 kJ/mol) suggested that the adsorption was an endothermic chemical adsorption process. Further analysis of the mechanism showed that ion exchange also contributed to the removal of Cd (II). Studies found that pH values <5 caused partial dissolution of HAA and high temperature was conducive to rapid adsorption. The F− and SO42− promoted adsorption by the precipitate with Ca (II), and Cl− hindered adsorption by complexation with Cd (II). The adsorption capacity of HAA was 3.70, 1.99, 1.17, 0.98 mmol/g for Pb (II), Cu (II), Cd (II), and Zn (II), respectively, indicated that HAA may be promising for composite materials to remove heavy metals from water.Hydroxyapatite attapulgite composites were prepared by a co-precipitation method. The SBET of Synthetic compounds was is 4- and 9-fold that of HA and A, respectively. What’s more, HAA removal efficiency and adsorption capacity that is significantly higher than A and HA under identical conditions. The study found that ion exchange and chemisorptions can explain the remove mechanism. But ion exchange with Ca (II) is the main factor. The F- and SO42- promoted adsorption by the precipitate with Ca (II) and rate equation were used to explain the mechanism of anionic action.

NOVEL MAGNETIC ALGINATE/HYDROXYAPATITE COMPOSITE WITH HIGH-EFFICIENCY CADMIUM-ADSORPTION PERFORMANCE

Novel environmental-friendly nano-composite magnetic attapulgite functionalized by chitosan and EDTA for cadmium (II) removal

Fabrication and Characterization of Magnetic Hydroxyapatite Entrapped Agarose Composite Beads with High Adsorption Capacity for Heavy Metal Removal

Facile preparation of magnetic sodium alginate/carboxymethyl cellulose composite hydrogel for removal of heavy metal ions from aqueous solution

Efficient adsorption and separation of Mn–Cu–Cd composite pollutants using MOF-based calcium alginate composite hydrogels

Preparation of magnetic microalgae composites for heavy metal ions removal from water

Xanthate-Modified Magnetic Fe3O4@SiO2-Based Polyvinyl Alcohol/Chitosan Composite Material for Efficient Removal of Heavy Metal Ions from Water

Preparation of Chitosan/Calcium Alginate/Bentonite Composite Hydrogel and Its Heavy Metal Ions Adsorption Properties

Enhanced adsorption performance of alginate/MXene/CoFe2O4 for antibiotic and heavy metal under rotating magnetic field

Biomimetic mineralization of hydrated magnesium carbonate for hydrogel reinforcement and heavy metal adsorption

Alginate Modified Magnetic Polypyrrole Nanocomposite for the Adsorptive Removal of Heavy Metal

The dynamics and adsorption of Cd (II) onto hydroxyapatite attapulgite composites from aqueous solution

Studies on adsorption properties of magnetic composite prepared by one-pot method for Cd(II), Pb(II), Hg(II), and As(III): Mechanism and practical application in food

Selective adsorption of heavy metals from water by a hyper-branched magnetic composite material: Characterization, performance, and mechanism

Synthesis of magnetic sodium lignosulfonate hydrogel(Fe3O4@LS) and its adsorption behavior for Cd2+ in wastewater

Efficient removal of cadmium ions from water by adsorption on a magnetic carbon aerogel

Self-adjusted bimetallic zeolitic-imidazolate framework-derived hierarchical magnetic carbon composites as efficient adsorbent for optimizing drug contaminant removal

Preparation of EDTA-modified Magnetic Attapulgite Chitosan Gel Bead Adsorbent for the Removal of Cu(II), Pb(II), and Ni(II).

Fabrication of novel inorganic mineral-polymer composite polydopamine-modified diatomaceous earth @ polydopamine-polyethyleneimine/calcium alginate and its highly effective applications in lead ions adsorption

Magnetic Hydroxyapatite for Batch Adsorption of Heavy Metals

Manganese-doped hydroxyapatite as an effective adsorbent for the removal of Pb(II) and Cd(II)