Abstract:A novel vapor-generation technique is described for mercury determination in aqueous solutions. Without need for a chemical reducing agent, dissolved mercury species are converted to volatile Hg vapor in a solution cathode glow discharge. The generated Hg vapor is then transported to an inductively coupled plasma for determination by atomic emission spectrometry. Mercury vapor is readily generated from a background electrolyte containing 0.1 M HNO 3. Vapor generation efficiency was found to be higher by a factor of 2-3 in the presence of low molecular weight organic acids (formic or acetic acids) or alcohols (ethanol). Optimal conditions for discharge-induced vapor generation and reduced interference from concomitant inorganic ions were also identified. However, the presence of chloride ion reduces the efficiency of Hg-vapor generation. In the continuous sample introduction mode, the detection limit was found to be 0.7 microg L (-1), and repeatability was 1.2% RSD ( n = 11) for a 20 microg L (-1) standard. In comparison with other vapor generation methods, it offers several advantages: First, it is applicable to both inorganic and organic Hg determination; organic mercury (thiomersal) can be directly transformed into volatile Hg species without the need for prior oxidation. Second, the vapor-generation efficiency is high; the efficiency (with formic acid as a promoter) is superior to that of conventional SnCl 2-HCl reduction. Third, the vapor generation is extremely rapid and therefore is easy to couple with flow injection. The method is sensitive and simple in operation, requires no auxiliary reagents, and serves as a useful alternative to conventional vapor generation for ultratrace Hg determination.

Non-aqueous Phase Cold Vapor Generation and Determination of Trace Cadmium by Atomic Fluorescence Spectrometry.

Determination of Bismuth in Solid Samples by Hydride Generation Atomic Fluorescence Spectrometry with a Dielectric Barrier Discharge Atomizer

Chemical Vapor Generation by Reaction of Cadmium with Potassium Tetrahydroborate and Sodium Iodate in Acidic Aqueous Solution for Atomic Fluorescence Spectrometric Application

Highly Sensitive and Interference-Free Determination of Bismuth in Environmental Samples by Electrothermal Vaporization Atomic Fluorescence Spectrometry after Hydride Trapping on Iridium-Coated Tungsten Coil

UV Photochemical Vapor Generation–atomic Fluorescence Spectrometric Determination of Conventional Hydride Generation Elements

An effective analytical system based on an ultraviolet atomizer for trace cadmium determination using atomic fluorescence spectrometry

Flow Injection Hydride Generation for On-Atomizer Trapping: Highly Sensitive Determination of Cadmium by Tungsten Coil Atomic Absorption Spectrometry

Improved Performance of On-line Atom Trapping in Flame Furnace Atomic Absorption Spectrometry by Chemical Vapor Generation: Determination of Cadmium in High-Salinity Water Samples

Evaluation of Tungsten Coil Electrothermal Vaporization-Ar/h2 Flame Atomic Fluorescence Spectrometry for Determination of Eight Traditional Hydride-Forming Elements and Cadmium Without Chemical Vapor Generation.

Investigation of Organic Phase Chemical Vapor Generation-Atomic Fluorescence Spectrometry in the Determination of Tin

Determination of Trace Mercury in Geological Samples by Direct Slurry Sampling Cold Vapor Generation Atomic Absorption Spectrometry

Chemical Vapor Generation from an Ionic Liquid Using A Solid Reductant: Determination of Hg, As and Sb by Atomic Fluorescence Spectrometry

Determination of bismuth in river sediment by electrothermal atomic absorption spectrometry with low-temperature atomization in argon/hydrogen

On-line Precipitation–dissolution in Knotted Reactor for Thermospray Flame Furnace AAS for Determination of Ultratrace Cadmium

Determination of Trace Copper in Biological Samples by On-line Chemical Vapor Generation-Atomic Fluorescence Spectrometry

Flow injection hydride generation and on-line W-coil trapping for electrothermal vaporization dielectric barrier discharge atomic emission spectrometric determination of trace cadmium

A novel sample introduction technique for the simultaneous determination of As, Se, Ge and Hg in Chinese Medical Material

Determination of trace bismuth by using a portable spectrometer after ultrasound-assisted dispersive liquid–liquid microextraction

Use of A Solution Cathode Glow Discharge for Cold Vapor Generation of Mercury with Determination by Icp-Atomic Emission Spectrometry

Simple and rapid method for the determination of trace bismuth in sulfur samples by hydride generation atomic fluorescence spectrometry with microwave digestion

Cloud Point Extraction–thermospray Flame Quartz Furnace Atomic Absorption Spectrometry for Determination of Ultratrace Cadmium in Water and Urine