Abstract:Two-dimensional transition metal dichalcogenides (TMDCs) have natural advantages in overcoming the short-channel effect in field-effect transistors (FETs) and in fabricating three-dimensional FETs, which benefit in increasing device density. However, so far, most reported works related to MoS2 FETs with a sub-100 nm channel employ mechanically exfoliated materials and all of the works involve electron beam lithography (EBL), which may limit their application in fabricating wafer-scale device arrays as demanded in integrated circuits (ICs). In this work, MoS2 FET arrays with a side-wall source and drain electrodes vertically distributed are designed and fabricated. The channel length of the as-fabricated FET is basically determined by the thickness of an insulating layer between the source and drain electrodes. The vertically distributed source and drain electrodes enable to reduce the electrode-occupied area and increase in the device density. The as-fabricated vertical FETs exhibit on/off ratios comparable to those of mechanically exfoliated MoS2 FETs with a nanoscale channel length under identical VDS. In addition, the as-fabricated FETs can work at a VDS as low as 10 mV with a desirable on/off ratio (1.9 × 107), which benefits in developing low-power devices. Moreover, the fabrication process is free from EBL and can be applied to wafer-scale device arrays. The statistical results show that the fabricated FET arrays have a device yield of 87.5% and an average on/off ratio of about 1.7 × 106 at a VDS of 10 mV, with the lowest and highest ones to be about 1.3 × 104 and 1.9 × 107, respectively, demonstrating the good reliability of our fabrication process. Our work promises a bright future for TMDCs in realizing high-density and low-power nanoelectronic devices in ICs.

Two-Dimensional MX 2 Semiconductors for Sub-5 Nm Junctionless Field Effect Transistors

Two-Dimensional MX2 Semiconductors for Sub-5 nm Junctionless Field Effect Transistors

Two-Dimensional ZrS 2 and HfS 2 for Making Sub-10 nm High-Performance P-Type Transistors

High-Performance Wafer-Scale MoS2 Transistors Toward Practical Application

Tunnel Field-Effect Transistors in 2D Transition Metal Dichalcogenide Materials

In-plane Schottky-barrier Field-Effect Transistors Based on 1 T /2 H Heterojunctions of Transition-Metal Dichalcogenides

Sub-5 Nm Gate Length Monolayer MoTe2 Transistors

Nanoscale Channel Length MoS 2 Vertical Field-Effect Transistor Arrays with Side-Wall Source/Drain Electrodes

Nanoscale Channel Length MoS2 Vertical Field-Effect Transistor Arrays with Side-Wall Source/Drain Electrodes

Atomistic Simulations of Device Physics in Monolayer Transition Metal Dichalcogenide Tunneling Transistors

Device performance limit of in-plane monolayer VTe2/WTe2 heterojunction-based field-effect transistors

Toward the Growth of High Mobility 2D Transition Metal Dichalcogenide Semiconductors

Sub-5 Nm Monolayer Arsenene and Antimonene Transistors

Modifying the Power and Performance of 2-Dimensional MoS 2 Field Effect Transistors

Electrostatically doped ballistic transition metal dichalcogenide tunnel field-effect transistors

Toward High-mobility and Low-power 2D MoS2 Field-effect Transistors

Potential of Transition Metal Dichalcogenide Transistors for Flexible Electronics Applications

Logical Integration Device for Two-Dimensional Semiconductor Transition Metal Sulfide

Performance Limits and Advancements in Single 2D Transition Metal Dichalcogenide Transistor

Crested two-dimensional transistors

Computational study of transition metal dichalcogenide cold source MOSFETs with sub-60 mV per decade and negative differential resistance effect