Abstract:Brillouin-based optical fiber sensing has gained considerable attention for the past few years thanks to its ability to offer distributed sensing. The major limitation of a Brillouin-based optical fiber sensor is its complexity because a time-consuming frequency-sweeping process is needed to obtain a local Brillouin gain spectrum (BGS) and to calculate the local Brillouin frequency shift (BFS). Thus, it is only suitable for static or slow-varying measurements. In this article, we propose an approach to achieve truly distributed and ultra-fast fiber-optic sensing based on an active and distributed bandpass microwave photonic filter (MPF) through stimulated Brillouin scattering (SBS). To obtain a truly distributed BFS, a counter-propagating single-shot pump pulse is launched into the fiber link and a microwave multi-tone (MMT) signal with a random initial phase distribution which is phase modulated on an optical carrier is launched into the fiber link from the other end. Due to the SBS effect, the -1st order sideband of the phase-modulated signal will experience Brillouin amplification while the +1st order sideband will experience Brillouin attenuation, and the phase-modulated signal is converted to an intensity-modulated signal. The entire operation is equivalent to a bandpass MPF. By detecting the optical signal at a photodetector (PD), a regenerated MMT signal with its magnitude and phase that are shaped by the MPF is obtained. By evaluating the regenerated MMT signal, the Brillouin information corresponding to the temperature or strain change at a specific location is revealed. The major advantage of the approach is that time-consuming frequency-sweeping process is avoided. Truly distributed strain, temperature, and vibration sensing with a 2 m spatial resolution over 49.5 m distance at a speed up to 83.3 kHz is experimentally demonstrated.

1200°C High-Temperature Distributed Optical Fiber Sensing by Using Brillouin Optical Time Domain Analysis

1200°C high-temperature distributed optical fiber sensing using Brillouin optical time domain analysis

High-Sensitivity Distributed Temperature Sensor Based on Brillouin Scattering With Double-Coated Single-Mode Fibers

High-Temperature Sensing Based on GAWBS In Silica Single-Mode Fiber

Combined Radiation and Temperature Effects on Brillouin-Based Optical Fiber Sensors

Parallel-Integrated Sapphire Fiber Bragg Gratings Probe Sensor for High Temperature Sensing

Spatial-division Multiplexed Brillouin Distributed Sensing Based on a Heterogeneous Multicore Fiber

Fabry-Perot Interferometric High-Temperature Sensing Up To 1200 Degrees C Based On A Silica Glass Photonic Crystal Fiber

Stimulated Brillouin scattering slow-light-based fiber-optic temperature sensor.

The Connection Technology Based on High Temperature Silica Fiber Optic Sensor

Single-mode Optical Fibre Thermocoupler Based on Regenerated Fibre Bragg Gratings Evaluated at ~1500 °C

FBGs in Bi-Ge Co-doped Photosensitive Fibre for High Temperature Measurement Up to 1000ºc

Ordinary Optical Fiber Sensor for Ultra-High Temperature Measurement Based on Infrared Radiation

High-precision optical fiber sensing beyond 1000°C

Truly Distributed and Ultra-Fast Microwave Photonic Fiber-Optic Sensor

Fiber Bragg grating sensing system for temperature measurements based on optically injected DFB-LD with an OEO loop

Sapphire Fiber Bragg Gratings Demodulated With Cross Correlation Algorithm for Long-Term High-Temperature Measurement

Sensitivity-enhanced high-temperature sensing using all-solid photonic bandgap fiber modal interference.

High-Spatial-Resolution High-Temperature Sensor Based on Ultra-Short Fiber Bragg Gratings With Dual-Wavelength Differential Detection

Hybrid Fiber-Optic Sensing Integrating Brillouin Optical Time-Domain Analysis and Fiber Bragg Grating for Long-Range Two-Parameter Measurement

Towards high-sensitivity and high-accuracy forward Brillouin scattering-based optomechanical temperature sensing in thin-diameter fibers