Abstract:<p>Wavelength-switchable fiber laser systems have many potential applications. Herein, the use of an erbium-doped fiber laser based on parallel fiber Bragg gratings (FBGs) (ASE: amplified spontaneous emission; BRM: broadband reflection mirror; CCD: charged-coupled device; EDFL: erbium-doped fiber laser; FBG: fiber Bragg gratings; IR: infrared; MZI: Mach–Zehnder interferometer; OSA: optical spectrum analyzer; OC: output coupler; PC: polarization controller; SNR: signal-to-noise ratios; 3D: three-dimensional; wavelength division multiplexing (WDM)) is proposed to achieve C + L band triple-wavelength-switchable laser output at approximately 1.5 μm. In the proposed system configuration, three parallel FBGs with different resonant wavelengths were fabricated using an 800 nm femtosecond pulsed laser. The proposed fiber laser incorporates first-order FBGs with the periods of 538, 542, and 547 nm. The femtosecond laser was propagated through polyimide coating and cladding and was focused onto the fiber core by a 63× oil lens, while FBGs were inscribed with the use of a point-by-point method to generate resonant wavelengths at 1555.3, 1569.2, and 1583.1 nm. When the FBGs were used as wavelength selectors, a lasing threshold of 85 mW was obtained, and switchable lasing with stable single- and dual-wavelength outputs was achieved based on the adjustment of a polarization controller. Concerning the switchable single-wavelength lasing, the signal-to-noise ratio was greater than 37.23 dB, and the 3 dB linewidth was less than 0.09 nm. The respective power fluctuation measurements were less than 0.22 and 0.68 dB for the single- and dual-wavelength lasers at 26 °C over a scan time of 30 min.</p>

Dual-wavelength Passively Q-Switched Single-Frequency Fiber Laser.

Compact passively Q-switched single-frequency distributed Bragg reflector fiber laser at 2.0 µm

Self Q-switched single-frequency all-fiber laser

Self-Q-switched and multi-wavelength mode-locked fiber laser based on figure-of-eight cavity

Q-switched Mode-Locking Femtosecond All-Fiber Laser Based on Er3+/Yb3+ Codoped Phosphate Fiber

Q-switched pulse generation by stimulated Brillouin scattering assisted four-wave mixing effect in erbium–bismuth co-doped multi-elements silica glass based optical fiber laser

Tunable High-Peak-power, High-Energy Hybrid Q-switched Double-Clad Fiber Laser

Dual-wavelength all-fiber Q-switched fiber laser using bismuth-doped fiber as saturable absorber

A 100 Mw-Level Single-Mode Switchable Dual-Wavelength Erbium-Doped Fiber Laser

High-energy, tunable-wavelengths, Q-switched pulse laser

A Linearly Polarized Wavelength-Tunable Q-Switched Fiber Laser with a Narrow Spectral Bandwidth of 112 MHz

Passively Q-Switched Laser with Single Longitudinal Mode Based on the Frequency Selection of Grating and F-P Etalon in Twisted-Mode Folded Cavity

Wavelength-switchable erbium-doped fiber laser incorporating fiber Bragg grating array fabricated by infrared femtosecond laser inscription

Tunable multidimensional multiplexed Q-switched pulse outputs from a linear fiber laser with a bidirectional loop

Single-polarization, switchable dual-wavelength erbium-doped fiber laser with two polarization-maintaining fiber Bragg gratings

Highly Stable Passively Q-Switched Erbium-Doped All-Fiber Laser Based on Niobium Diselenide Saturable Absorber

Polarization-multiplexed, single-cavity dual-comb fiber laser based on a birefringent crystal and a saturable absorber.

Switchable multiwavelength ytterbium-doped double-clad fiber laser based on a multimode fiber grating

All-polarization-maintaining, semiconductor saturable absorbing mirror mode-locked femtosecond Er-doped fiber laser with a gigahertz fundamental repetition rate

Single-frequency Q-switched erbium-doped fiber ring laser by combination of a distributed Bragg reflector laser and a Mach-Zender interferometer