Abstract:In this paper, we shall present a new micromechanical damage model for capturing the mechanical behaviors of quasi-brittle geomaterials under a wide range of compressive stress. Two essential coupled non-linear mechanisms are taken into account: plastic deformation related to frictional sliding along the microcrack surfaces, and microscopic damage induced by the initiation and propagation of microcracks. Within the framework of thermodynamics and Mori–Tanaka homogenization scheme, free energy and thermodynamic forces, including the local stress applied on the microcracks and damage driving force are deduced. The main novelty of this work lies in presenting a new physically based non-associated and state-dependent friction law to capture the plastic distortion, in which the friction coefficient is no longer a constant but a state-dependent variable varying with the surface asperities of microcracks. The relationship between the friction coefficient and mean local stress, as well as microscopic damage is subtly defined. Intriguingly, a macroscopic strength criterion is derived as an inherent part of the proposed model without rotation of the principal stress. Moreover, semi-analytical stress–strain–damage relationships of the proposed model can be derived under conventional triaxial compression. These up-scaling analyses provide a powerful tool for parameter calibration. For application, the semi-implicit return mapping algorithm with plasticity-damage decoupling correction procedure (SRM-PDDC) is adopted for numerical implementation. To demonstrate the performance of the micromechanical model, we compare the model predictions with experimental data of quasi-brittle rocks in literature as well as the results obtained by Zhu et al. (2016). Finally, the applicable condition of the SRM-PDDC algorithm is discussed in detail.

Predicting the mechanical properties of brittle porous materials with various porosity and pore sizes.

A statistical model for predicting the mechanical properties of nanostructured metals with bimodal grain size distribution

A robust peridynamic computational framework for predicting mechanical properties of porous quasi-brittle materials

Effects of Void Morphology on Fracturing Characteristics of Porous Rock Through a Finite-Discrete Element Method

Stochastic Micromechanical Damage Model for Porous Materials under Uniaxial Tension

A Micromechanical Analysis of the Fracture Properties of Saturated Porous Media

A MECHANICAL MODEL OF POROUS MEDIA AND ITS APPLICATION IN CEMENT MATERIALS

A Universal Model for Predicting the Effective Shear Modulus of Two-Dimensional Porous Materials

AN ELASTOPLASTIC CONSTITUTIVE MODEL FOR POROUS MATERIALS

Progressive Failure Characteristics of Brittle Rock under High-Strain-Rate Compression Using the Bonded Particle Model

Study on Micromechanical Elastic-Plastic-brittle Damage Model of Concrete

A Micromechanics-Based Multiscale Constitutive Model for Brittle to Ductile Behavior of Porous Geomaterial

A simplified micromechanical model for predicting effective mechanical behaviors of continuous bidirectional-fiber-reinforced composites

A new micromechanical damage model for quasi-brittle geomaterials with non-associated and state-dependent friction law

ON PROBABILITY MODEL OF PHYSICO-MECHANICAL PARAMETERS OF QUASI-BRITTLE MATERIALS AND ASSOCIATED MECHANICAL FAILURE BEHAVIORS

Porosity governs failure in bioconsolidated space bricks

Research on the mechanical properties prediction of carbon/epoxy composite laminates with different void contents

A Multiscale Mechanical Model for Materials Based on Virtual Internal Bond Theory

Influence of hierarchical porosity on the mechanical properties of porous woven composites under thermomechanical loading

Mechanical properties and energy conversion of 3D close-packed lattice model for brittle rocks

The Mechanical Behavior of Porous Metal Fiber Sintered Sheets