Abstract:Many different practical constitutive models have been proposed for saturated fractured porous media, where the number of model parameters equals the number of constitutive state variables. However, none has considered the fully coupled deformation and hydromechanical behavior between pore and fracture domains. To address this issue, first, composite effective stresses are proposed as stress state variables based on the mixture theory, the nesting idea and the symmetrical formal role of pores and fractures. These variables can consider the interaction between the pore and fracture domains. Second, composite skeleton strains, which are energy-conjugate to the composite effective stresses, are derived from the first law of thermodynamics. Assuming the strain state variable solely depends on its conjugate stress state variable, the linear isotropic elastic equations of solid are derived by free energy potential function. The constitutive equations of fluid are derived using mass conservation equations and the constitutive equations of composite skeleton. Third, the approaches for measuring parameters of the model are introduced from the experiments on intact rock and joints, separately. Finally, the developed constitutive equations are compared theoretically and numerically with the Wilson & Aifantis model and the Khalili & Valliappan model. A parameters sensitivity analysis of the model is then conducted. The modelling results show that there are some differences in the initial fluid pressure magnitude, dissipation patterns, and final settlement of the model proposed in this paper compared to the other two models. Increasing permeability ratio facilitates a faster dissipation rate of fluid pressure in both pores and fractures, enhancing the consolidation rate of the rock mass. Increasing the shape factor facilitates the dissipation of pore fluid pressure and promotes settlement within a specific range.

A Micromechanics-Based Multiscale Constitutive Model for Brittle to Ductile Behavior of Porous Geomaterial

Investigation of compressive and tensile behaviors for porous sandstone by a microstructure-based constitutive model

A Micro–macro Constitutive Model for Rock Considering Breakage Effects

A new yield criterion based constitutive model for porous materials

A Micro–macro Model of Pore Pressure Effect on Shear Fracture in Brittle Rocks under Compression

A size-dependent ductile fracture model: Constitutive equations, Numerical implementation and Validation

A unified hardening/softening elastoplastic model for rocks undergoing brittle-ductile transition with strength-mapping and fractional plastic flow rule

Experimental investigation and micromechanical modeling of the brittle-ductile transition behaviors in low-porosity sandstone

A Unified Micromechanics-Based Damage Model for Instantaneous and Time-Dependent Behaviors of Brittle Rocks

AN ELASTOPLASTIC CONSTITUTIVE MODEL FOR POROUS MATERIALS

A new micromechanical damage model for quasi-brittle geomaterials with non-associated and state-dependent friction law

A Micro-Macro Dynamic Compressive-Shear Fracture Model under Static Confining Pressure in Brittle Rocks

A Hypoplastic Constitutive Model for Granular Materials with Particle Breakage

A three‐dimensional multiscale damage‐poroelasticity model for fractured porous media

A micromechanics-based variational phase-field model for fracture in geomaterials with brittle-tensile and compressive-ductile behavior

A brittle-ductile transition constitutive model based on discrete elastic tensors

Quasi-Micromechanical Constitutive Theory for Brittle Damaged Materials under Tension

A Multiscale Poroelastic Damage Model for Fracturing in Permeable Rocks

Micromechanical controls on the brittle-plastic transition in rocks

A Practical Constitutive Model of Saturated Fractured Porous Rock Mass Considering the Fully Coupling Between the Pore and Fracture Domains

Micromechanics-based model study of shear properties of brittle rocks