Abstract:Purpose This paper aims to present an adaptive sliding mode control (ASMC) for tunnel boring machine cutterhead telescopic system with uncertainties to achieve a high-precision trajectory in complex strata. This method could be applied to solve the problems caused by linear and nonlinear model uncertainties. Design/methodology/approach First, an integral-type sliding surface is defined to reduce the static tracking error. Second, a projection type adaptation law is designed to approximate the linear and nonlinear redefined parameters of the electrohydraulic system. Third, a nonlinear robust term with a continuous approximation function is presented for handling load force uncertainty and reducing sliding mode chattering. Moreover, Lyapunov theory is applied to guarantee the stability of the closed-loop system. Finally, the effectiveness of the proposed controller is proved by comparative experiments on a scaled test rig. Findings The linear and nonlinear model uncertainties lead to large variations in the dynamics of the mechanism and the tracking error. To achieve precise position tracking, an adaptation law was integrated into the sliding mode control which compensated for model uncertainties. Besides, the inherent sliding mode chattering was reduced by a continuous approximation function, while load force uncertainty was solved by a nonlinear robust feedback. Therefore, a novel ASMC for tunnel boring machine cutterhead telescopic system with uncertainties can improve its tracking precision and reduce the sliding mode chattering. Originality/value To the best of the authors’ knowledge, the ASMC is proposed for the first time to control the tunnel boring machine cutterhead telescopic system with uncertainties. The presented control is effective not only in control accuracy but also in parameter uncertainty.

Attitude Correction System and Cooperative Control of Tunnel Boring Machine.

Trajectory Tracking Control in Horizontal Direction of Open-type Hard Rock Tunnel Boring Machine Based on Adaptive Robust Control Strategy

Indirect Adaptive Robust Trajectory Tracking Control of Hard Rock TBM with Load Variation of Tunneling Face

Trajectory Control of Tunnel Boring Machine Based on Adaptive Rectification Trajectory Planning and Multi-cylinders Coordinated Control

Pose and trajectory control of shield tunneling machine in complicated stratum

Coordinated Control of Gripper and Thrust System for TBM Based on Construction Data

Coordinated control of gripper and thrust system for single gripping TBM

Dynamic Modeling and Trajectory Tracking Control of a Novel Muck-Removal Hydraulic Manipulator

Adaptive Sliding Mode Control for Tunnel Boring Machine Cutterhead Telescopic System with Uncertainties.

Performance Analysis of Electro-Hydraulic Thrust System of TBM Based on Fuzzy PID Controller

Precision Versus Intelligence: Autonomous Supporting Pressure Balance Control for Slurry Shield Tunnel Boring Machines

Theory and Realization of Supervision and Control System for Tunneling Machine

A Novel Control Strategy of Gripper and Thrust System of TBM Based on Model Analysis

Research on geologic adaptive control of ground pressure for single gripping TBM

Synchronous control of TBM cutterhead driving system based on single-neuron fuzzy strategy

Synchronization Control of Torque Cylinders for Hard Rock Tunnel Boring Machine

Research on Shield Boring Attitude Control Based on Fuzzy PID Algorithm

The Vertical Adjustment System with Angle Closed Loop Control for TBM

Motion Control of Thrust System for Shield Tunneling Machine

Nonlinear Disturbance Observer Based Integral Sliding Mode Control for Tunnel Boring Machine.

Autonomous steering control for tunnel boring machines