Abstract:Self-sustained combustion instabilities are one of the most plaguing challenges and problems in lean-conditioned propulsion and land-based engine systems, such as rocket motors, gas turbines, industrial furnace and boilers, and turbo-jet thrust augmenters. Either passive or active control in open- or closed-loop configurations can be implemented to mitigate such instabilities. One of the classical disadvantages of passive control is that it is only implementable to a designed combustor over a limited frequency range and can not respond to the changes in operating conditions. Compared with passive control approaches, active control, especially in closed-loop configuration is more adaptive and has inherent capacity to be implemented in practice. The key components in closed-loop active control are 1) sensor, 2) controller (optimization algorithm) and 3) dynamic actuator. The present work is to outline the current status, technical challenges and development progress of the active control approaches (in open- or closed-loop configurations). A brief description of feedback control, adaptive control, model-based control and sliding mode control are provided first by introducing a simplified Rijke-type combustion system. The modelled combustion system provides an invaluable platform to evaluate the performance of these feedback controllers and a transient growth controller. The performance of these controllers are compared and discussed. An outline of theoretical, numerical and experimental investigations are then provided to overview the research and development progress made during the last 4 decades. Finally, potential, challenges and issues involved with the design, application and implementation of active combustion control strategies on a practical engine system are highlighted.

Variable Structure Control in the Start Process for Staged Combustion Cycle Engine

Spray Swirling Flame Dynamic under Combined Modulation of Air and Fuel

Experimental Investigation on High Frequency Perturbation to Combustion Instability by Low Frequency Actuator in a Backward-facing Step Combustor

Dynamic Characteristic Study of Staged Combustion Cycle Rocket Engine

Simulation of Optimization of Variable Geometry for a Turbofan Engine of a Missile

A Review of Active Control Approaches in Stabilizing Combustion Systems in Aerospace Industry

Multivariable steady-state control of variable cycle engine based on LQG/LTR

Throttling simulation and control of liquid oxygen/liquid methane rocket engine pressurized by the electric pump

Dynamic Characteristics of LOX/Kerosene Variable Thrust Liquid Rocket Engine Test System Based on General Modular Simulation Method

Control Optimization of the Transient Performance of the Selective Bleed Variable Cycle Engine During Mode Transition

Design of Thrust Vectoring Vertical/Short Takeoff and Landing Aircraft Stability Augmentation Controller Based on L1 Adaptive Control Law

Stability of Staged Premixed Combustion

Performance Comparison of Control Strategies for a Variable-Thrust Solid-Propellant Rocket Motor

Static Equilibrium Characteristics of Full‐Flow Staged Combustion Cycle Engine Under Different Propellants

An Innovative Partition Model of Liquid Rocket Engine Combustion Chambers

Thrust Control Method and Technology of Variable-Thrust Liquid Engine for Reusable Launch Rocket

Flow control of double bypass variable cycle engine in modal transition

Combustion Instabilities and its Control Techniques for Liquid Propellant Rocket Engine

Simulation Research on Adjustment Plan to Mode Transition of Variable Cycle Engine

Intelligent variable strut for combustion performance optimization of a wide-range scramjet engine

Development and experimental validation of a field programmable gate array–based in-cycle direct water injection control strategy for homogeneous charge compression ignition combustion stability