Abstract:In this study, three different approaches, i.e. the sol-gel method, precipitation method and hard-template method, were applied to synthesize MgF2 catalysts with improved stability towards the dehydrofluorination of hydrofluorocarbons (HFCs); the in situ XRD technique was employed to investigate the relationship between the calcination temperature and the crystallite size of precursors to determine optimal calcination temperature for the preparation of the MgF2 catalysts. Moreover, the physicochemical properties of MgF2 catalysts were examined via BET, XRD, EDS and TPD of NH3 and compared. Undoubtedly, the application of different methods had a significant influence on the surface properties and catalytic performances of MgF2 catalysts. The surface areas of the catalysts prepared by the precipitation method, sol-gel method and template method were 120, 215 and 304 m2 g-1, respectively, upon calcination at 200 °C. However, the surface area of the MgF2 catalysts decreased significantly when the calcination temperatures of 300 and 350 °C were applied. The catalytic performance of these catalysts was evaluated via the dehydrofluorination of 1,1-difluoroethane (HFC-152a). The MgF2 catalyst prepared by the precipitation method showed the lowest catalytic activity among all the MgF2 catalysts. When the calcination temperature was above 300 °C, the MgF2 catalysts prepared via the template method demonstrated the highest catalytic conversion rate with catalytic activity following the order: MgF2-T (template method) > MgF2-S (sol-gel method) > MgF2-P (precipitation method). The conversion rate generally agreed with the total amount of acid on the surface of the catalysts, which was measured by the NH3-TPD technique. The MgF2-T catalysts were further examined for the dehydrofluorination of HFC-152a for 600 hours, and a conversion rate greater than 45% was maintained, demonstrating superior long-term stability of these catalysts.

Synthesis of HFC-134a over CrF 3 /alf 3 Catalysts

Synthesis of HFC-134a over CrF3/A1Fs catalysts

A Mechanistic Study of the Hydrolysis of Tetrafluoromethane on Γ-Alumina

Studies on Catalysts for HFC-134a Preparation by Vapor-Phase Fluorination

Cr-Zn-Al Catalyst for Synthesizing HFC-134a by Gas Phase Fluorination

Highly Efficient C–F Bond Cleavage to Access Esters over Robust Silicon-Aluminum Phosphate Catalyst

Influence of inorganic acids on the dehydration of fructose to 5-hydroxymethylfurfural over AlCl3 catalyst

Catalytic performance of alumina catalysts with different surface properties for the dehydrofluorination of HFC-134a (1,1,1,2-Tetrafluoroethane)

Preparation of 1,1,1, 2-tetrafluoroethane (HFC-13 4a) by vapor-phase catalytic fluorination

Sulfate ion induced formation of unsaturated coordination of AlF 3 nanocluster catalyst confined in carbon framework for catalytic dehydrofluorination

Confined aluminum fluoride layers derived from the in situ etching of Ti3AlC2 as the robust catalyst for dehydrofluorination reaction

Conversion of fluoroform to CHCl 3 and AlCl x F 3− x via its mechanochemical reaction with AlCl 3

Preparation and characterization of chromium-doped magnesium fluoride catalysts via an aqueous sol–gel method

Stabilizing F-Al-O active center via confinement of Al 2 O 3 in SiC framework for conversion of 1,1-difluoroethane greenhouse gas

Synthesis of 2,3,3,3-tetrafluoropropene by catalytic dehydrofluorination of 1,1,1,3,3-pentafluoropropane over Ni-Cr 2 O 3 catalyst

Rational design of MgF2 catalysts with long-term stability for the dehydrofluorination of 1,1-difluoroethane (HFC-152a)

A Novel Vapor‐Phase Ssynthetic Route for Fluoromethane Toward Highly Efficient Industrial Production

Preparation of 1,1,1,2-tetrafluoroethane by the vapor-phase catalytic reaction of 1,1,1-trifluoro-2-chloroethane with anhydrous hydrogen fluoride

Solution Combustion Synthesis of Cr₂O₃ Nanoparticles and the Catalytic Performance for Dehydrofluorination of 1,1,1,3,3-Pentafluoropropane to 1,3,3,3-Tetrafluoropropene

A Practical FeCl3/HCl Photocatalyst for Versatile Aliphatic C–H Functionalization

Catalytic Effect of Active Carbon Supported Metal Chloride on the Pyrolysis 1-Chloro-1,1-difluoroethane to Vinylidene Fluoride