Abstract:Herein, we aimed to enhance the activity and stability of Ni-based catalysts used in exhaust gas –methane reforming process. To achieve this, modifications were made to the Ni/Ca-Al 2 O 3 . The influence of La addition and Ni loading on the physicochemical properties of the Ni/Ca-Al 2 O 3 catalyst used in exhaust gas-methane reforming was investigated. The results demonstrated that adding La as a structural promoter improved the grain size and dispersion of Ni on Al 2 O 3 . However, increasing the Ni loading beyond 18 wt% had a detrimental effect on these properties. Therefore, it was determined that the optimal catalyst composition was 18 wt% Ni loading with 2 wt% La addition (2La-18Ni/Ca-Al). Furthermore, a 72-hour lifetime test on the 2La-18Ni/Ca-Al catalyst was conducted, which demonstrated its excellent resistance to carbon deposition and stability under the permissible exhaust temperatures. The catalyst's regeneration stability was evaluated in terms of its service life and economy in the REGR system, and it was found that even after six regeneration cycles, 2La-18Ni/Ca-Al maintained high activity. Moreover, the Ni-based catalyst was successfully modified to achieve gas phase composition closer to thermodynamic equilibrium. The complex mechanism of exhaust gas-methane reforming was proposed under different feedstock temperature: methane follows a sequential dehydrogenation path of CH 4 → CH 3 → CH 2 → CH → C + 4H on the surface of Ni; during this reforming process, O 2 , H 2 O, and CO 2 all serve as oxidants, and the O atoms dissociated from these molecules participate in the oxidation of both CH and C. It was worth noting that CO 2 contained in exhaust gas could be efficiently recycled on-board by conducting exhaust gas-methane reforming at feedstock temperatures above 700 °C.

Syngas production from methane reforming with O 2 and CO 2 over Ni–La 2 O 3 /SiO 2 catalysts using EDTA salt precursors

Syngas production from methane reforming with O<sub>2</sub> and CO<sub>2</sub> over Ni–La<sub>2</sub>O<sub>3</sub>/SiO<sub>2</sub> catalysts using EDTA salt precursors

Combined Carbon Dioxide Reforming and Partial Oxidation of Methane to Syngas over Ni−La2O3/SiO2 Catalysts in a Fluidized-Bed Reactor

Combined Carbon Dioxide Reforming and Partial Oxidation of Methane to Syngas over Ni−La<sub>2</sub>O<sub>3</sub>/SiO<sub>2</sub>Catalysts in a Fluidized-Bed Reactor

Highly Active and Stable Lanthanum‐doped Core–Shell‐structured Ni@SiO2 Catalysts for the Partial Oxidation of Methane to Syngas

Preparation of Novel Mesoporous LaFeO3-SBA-15-CTA Support for Syngas Formation of Dry Reforming

Syngas Production from Reforming of Methane with Co2 and O-2 over Ni/Sro-Sio2 Catalysts in A Fluidized Bed Reactor

Combination of CO2 reforming and partial oxidation of methane to produce syngas over Ni/SiO2 and Ni–Al2O3/SiO2 catalysts with different precursors

Catalytic conversion of methane and CO2 to synthesis gas over a La2O3-modified SiO2 supported Ni catalyst in fluidized-bed reactor

Specific Features Concerning the Mechanism of Methane Reforming by Carbon Dioxide over Ni/La2O3Catalyst

A highly active Ni catalyst supported on Mg-substituted LaAlO3 for carbon dioxide reforming of methane

Studies on nickel-based catalysts for carbon dioxide reforming of methane

Performance of supported nickel catalyst for reforming of CH 4 with CO 2 to syngas: II . Effect of basic promoters

Partial Oxidation Of Methane To Syngas Over Ni-Based Catalysts

Syngas Production Via Combined Oxy-Co2 Reforming of Methane over Gd2O3-modified Ni/SiO2 Catalysts in a Fluidized-Bed Reactor

Combination of CO2 reforming and partial oxidation of methane to produce syngas over Ni/SiO2 prepared with nickel citrate precursor

Highly Active and Stable Ni/ZrO2 Catalyst for Syngas Production by CO2 Reforming of Methane

Methane reforming to syngas over LaNi x Fe 1−x O 3 (0≤ x ≤1) mixed-oxide perovskites in the presence of CO 2 and O 2

Insight into exhaust gas-methane reforming over La 2 O 3 -modified Ni/Ca-Al for enhanced hydrogen-rich production

Catalytic conversion of CH4 and CO2 to synthesis gas on Ni/SiO2 catalysts containing Gd2O3 promoter

Syngas Production from CO2 Reforming with Methane over Core-Shell Ni@SiO2 Catalysts