Abstract:Experimental, numerical and analytical methods were used to investigate the effects of the blade trailing edge thickness on the profile loss of ultrahigh-lift low-pressure turbine blades. Two cascades, the T106C and the T2, were studied. The loss obtained based on the data at the blade trailing edge plane and the plane 0.3 Chord downstream of the trailing edge agree with each other for T106C blade with and without upstream wakes at different Reynolds numbers. The blade profile losses were broken down as the suction surface boundary loss, the pressure side boundary loss and the mixing loss downstream of the trailing edge for six Reynolds numbers. Trailing edge thicknesses varying from 1.4% to 4.7% pitch were investigated at a Reynolds number of 210,000. It was found that the flow distributions across the passage at the trailing edge planes were highly nonuniform. In particular, and as a result, the trailing edge base pressure was higher than the mixed-out static pressure, so the contribution of the base pressure to the mixing loss downstream of the trailing edge plane was to reduce the loss. When the trailing edge thickness increases, there are three main effects: (1) the area with high base pressure region increases, which tends to reduce the downstream mixing loss; (2) the base pressure reduces, which tends to increase the loss; and (3) the flow diffusion downstream of the trailing edge, which tends to increase the loss. The overall result is the combined effect. For the T106C cascade, increasing the trailing edge thickness from 1.9% pitch to 2.8% pitch has a small effect on the loss. Further increasing the trailing edge thickness increases the loss. The T2 blade has a higher lift than the T106C blade, so the effects of the base pressure in reducing the mixing loss downstream of the trailing edge is more evident. The experimental results show that the profile loss first decreases and then increases as the trailing edge thickness increases. CFD, using the transition k-ω SST model and the k-ω SST model, provides good predictions of the aerodynamic performance. It was used to study the cases with trailing edge thicknesses of 1.4% pitch and 2.9% pitch. The profile loss is almost the same for these two trailing edge thickness. The results show that it is possible to use thicker blade trailing edges in low pressure turbines without aerodynamic penalty. This can lead to benefits in terms of mechanical integrity and manufacturing cost reductions.

Numerical Study of Improving Aerodynamic Performance of Low Solidity Lpt Cascade Through Increasing Trailing Edge Thickness

Use Deflected Trailing Edge to Improve the Aerodynamic Performance and Develop Low Solidity LPT Cascade

Roughness Effects on Flow Losses of a High-Lift Low-Pressure Turbine Cascade

Numerical simulation of the effects of trailing edge thickness on aerodynamic performance of low pressure turbine

Effects of deflected trailing edge on the aerodynamic performance of high-lift low pressure turbine cascades

The Effects Of Trailing Edge Thickness On The Losses Of Ultra-High Lift Lp Turbine Blades

The Effects of Trailing Edge Thickness on the Losses of Ultrahigh Lift Low Pressure Turbine Blades

Numerical Study of the Boundary Layer Separation of a Low‐Pressure Turbine Cascade at Different Incidence Angles

Large Eddy Simulations and Experiments on Low-Reynolds-number Laminar Separation Control for Low-Pressure Turbine Blades with Oblong-Dimpled Surface

Investigations on Aerodynamic Performance of Turbine Cascade at Different Flow Conditions

Numerical Study of Combining Steady Vortex Generator Jets and Deflected Trailing Edge to Reduce the Blade Numbers of Low Pressure Turbine Stage

Numerical Study On Flow Separation Control For High-Lift Low-Pressure Turbine Split Blade

Numerical Study of Aerodynamic Performance of a High Solidity H-type Wind Turbine

Effect of Winglet-Shroud Tip With Labyrinth Seals on Aerodynamic Performance of a Linear Turbine Cascade

Investigation of leading-edge protuberances for the performance improvement of thick wind turbine airfoil1

Effect of Leading-Edge Optimization on the Loss Characteristics in a Low-Pressure Turbine Linear Cascade

Influence of Solidity on Aerodynamic Performance of Axial Supersonic Through-Flow Fan Cascades

Experimental Study of Flow Control on Tip Leakage Flow in Variable Geometry Linear Turbine Cascades with Different Pivot Layouts

Experimental and Numerical Investigations for Dual−Cavity Tip Aerodynamic Performance in the Linear Turbine Cascade

Experiment Study of Aerodynamic Performance for the Suction-Side and Pressure-Side Winglet-Cavity Tips in a Turbine Blade Cascade

Numerical Investigation on Ultra-High-lift Low-Pressure Turbine Cascade Aerodynamics at Low Reynolds Numbers Using Transition-Based Turbulence Models