Abstract:Experimental, numerical and analytical methods were used to investigate the effects of the blade trailing edge thickness on the profile loss of ultrahigh-lift low-pressure turbine blades. Two cascades, the T106C and the T2, were studied. The loss obtained based on the data at the blade trailing edge plane and the plane 0.3 Chord downstream of the trailing edge agree with each other for T106C blade with and without upstream wakes at different Reynolds numbers. The blade profile losses were broken down as the suction surface boundary loss, the pressure side boundary loss and the mixing loss downstream of the trailing edge for six Reynolds numbers. Trailing edge thicknesses varying from 1.4% to 4.7% pitch were investigated at a Reynolds number of 210,000. It was found that the flow distributions across the passage at the trailing edge planes were highly nonuniform. In particular, and as a result, the trailing edge base pressure was higher than the mixed-out static pressure, so the contribution of the base pressure to the mixing loss downstream of the trailing edge plane was to reduce the loss. When the trailing edge thickness increases, there are three main effects: (1) the area with high base pressure region increases, which tends to reduce the downstream mixing loss; (2) the base pressure reduces, which tends to increase the loss; and (3) the flow diffusion downstream of the trailing edge, which tends to increase the loss. The overall result is the combined effect. For the T106C cascade, increasing the trailing edge thickness from 1.9% pitch to 2.8% pitch has a small effect on the loss. Further increasing the trailing edge thickness increases the loss. The T2 blade has a higher lift than the T106C blade, so the effects of the base pressure in reducing the mixing loss downstream of the trailing edge is more evident. The experimental results show that the profile loss first decreases and then increases as the trailing edge thickness increases. CFD, using the transition k-ω SST model and the k-ω SST model, provides good predictions of the aerodynamic performance. It was used to study the cases with trailing edge thicknesses of 1.4% pitch and 2.9% pitch. The profile loss is almost the same for these two trailing edge thickness. The results show that it is possible to use thicker blade trailing edges in low pressure turbines without aerodynamic penalty. This can lead to benefits in terms of mechanical integrity and manufacturing cost reductions.

Use Deflected Trailing Edge to Improve the Aerodynamic Performance and Develop Low Solidity LPT Cascade

Roughness Effects on Flow Losses of a High-Lift Low-Pressure Turbine Cascade

Secondary Flow Reduction By Blade Redesign And Endwall Contouring Using An Adjoint Optimization Method

Optimization Design of a Turbine Blade to Reduce Secondary Flow Loss Using a Viscous Adjoint Method

The Effects of Trailing Edge Thickness on the Losses of Ultrahigh Lift Low Pressure Turbine Blades

The Effects Of Trailing Edge Thickness On The Losses Of Ultra-High Lift Lp Turbine Blades

Numerical Study of the Boundary Layer Separation of a Low‐Pressure Turbine Cascade at Different Incidence Angles

Effect of Trailing-Edge Modification of A Mixed-Flow Pump

Flow mechanism of a highly loaded low pressure turbine cascade with integrated-optimized end wall contouring and root lean

Research on the aerodynamic performance of the wind turbine blades with leading-edge protuberances

The Blade Curving Effects in a Turbine Stator Cascade With Low Aspect Ratio

Investigation of leading-edge protuberances for the performance improvement of thick wind turbine airfoil1

Flow fields and losses downstream of an ultra-highly loaded turbine cascade with bowed blades

Flow Separation Control by Using Bowed Blade in Highly Loaded Turbine Cascades

Experimental Investigation of the Aerodynamic Performance of Bowed Blades in High-turning Linear Turbine Cascades

Influence of Solidity on Aerodynamic Performance of Axial Supersonic Through-Flow Fan Cascades

The Effect of Fsti to the Combined Separation Control Strategy of Surface Roughness with Upstream Wakes

Implementation of Flow Loss Minimization Incorporating the Riblet Technique on Cascade Profile and Experimental Validation

Experimental investigation of secondary flow losses in a variable geometry linear turbine cascade with winglet tip

Analysis of the Mechanism Governing the Migration of Boundary Layers in a Highly-loaded Turbine Cascade Controlled By Using Bowed Blades

Blade Bowing Effect on Aerodynamic Performance of a Highly Loaded Turbine Cascade