Abstract:The present work aims to examine the reciprocating wear characteristics at elevated temperatures (200 °C, 400 °C, and 600 °C) of CoCrFeNiW 0.3 + 5 at% C high entropy alloy coatings, which has been synthesized by atmospheric plasma spraying. The experimental findings pertaining to the worn surface demonstrate that an increase in testing temperature leads to a reduction in wear scar depth. The findings derived from the examination using field emission scanning electron microscopy (FESEM) revealed the existence of wear debris, an adhesive layer, craters, and scratches on the surfaces that were subjected to wear. The examination of worn surfaces using X-ray photoelectron spectroscopy (XPS) has shown the existence of several oxides. The presence of oxides is established while evaluating worn surfaces by Fourier transform infrared spectroscopy (FTIR). The X-ray diffraction (XRD) analysis reveals that the lack of oxide development might perhaps be attributed to the limited width of the worn track. The observed reduction in wear volume loss with increasing testing temperature may be attributable to the reaction arise inside the tribolayer and oxides formation. The energy-dispersive X-ray spectroscopy (EDS) examination of the Al 2 O 3 counter body indicated the presence of a transferred tribofilm. The alloy coating, namely the CoCrFeNiW 0.3 + 5 at% C alloy coating, exhibits a decreased mass loss of 9.43 mg and an average coefficient of friction of 0.46 at a test temperature of 600 °C. When the sample is subjected to a wear testing temperature of 600 °C, the wear mass is decreased by 24.37%. The results of this investigation provide promising prospects for practical use in applications requiring high temperature wear resistance.

Friction and Wear Behavior of 30crmnsia Steel at Elevated Temperatures

The effect of temperature on the unlubricated sliding wear of 5 CrNiMo steel against 40 MnB steel in the range 400–600°C

Effects of Temperature on the Tribological Properties of NM600 under Sliding Wear

Temperature-mediated tribological characteristics of 40CrNiMoA steel and Inconel 718 alloy during sliding against Si3N4 counterparts

Wear characteristics of austenitic steel and martensitic steel at high temperature

Study on Microstructure and Wear Behavior of Cr25 Heat Resistant Steel

Frictional Study on 30CrNi2MoVA Steel Based on Experiments and Finite Element Simulation: Wear Prediction

Tribological Behavior of In-Situ (cr, Mo)/Fe3al-20 Wt.%Al2o3 Composites at Elevated Temperatures

Cyclic Softening Properties of 30cr2mov Steel at Elevated Temperatures

High-temperature oxidation wear performance and mechanism of Cr–Mo (W)–V hot-work die steel

Revealing the role of micron-sized in situ TiC particles on tensile properties and fracture mechanism of martensitic wear-resistant steel at elevated temperature

Effects of Microstructure Evolution on Fretting Wear Behaviors of 25CrNi2MoVE Steel under Different Tempering States

Sliding Wear of CoCrNi Medium-Entropy Alloy at Elevated Temperatures: Wear Mechanism Transition and Subsurface Microstructure Evolution

Tempering temperature dependence on the microstructure, mechanical properties and wear behaviour of a novel high chromium cast iron

Study on the Tribology Properties of Iron-Nickel-Base NCF 3015 Steel for Engine Valve at High Temperatures

Temperature effect on the friction and wear of an Al-60Si alloy

Evaluation on tribological characteristics of (TiC+TiB)/Ti-6Al-4V composite in the range from 25 C to 600 C

High temperature tribological behavior of atmospheric plasma-sprayed CoCrFeNiW0.3 + 5 at% C high-entropy alloy coating

Friction and Wear of Typical Tool Material at Elevated Temperature

Tribological properties of copper-matrix composites against laser-cladded Co06 coating on 30CrMoSiVA steel at elevated temperatures

Wear Behavior of Mg-3Al-0.4Si Alloy at Elevated Temperatures