Abstract:CoCrNi medium-entropy alloy (MEA) exhibits exceptional damage-tolerance, particularly at cryogenic temperatures, but demonstrates poor wear resistance. In this study, we propose a strategy to significantly reduce friction and wear of CoCrNi MEA film through the introduction of massive interstitial carbon-induced amorphization. The microstructure of as-sputtered CoCrNi film reveals an anisotropic columnar nanograin structure, featuring a primary face-centered-cubic (fcc) phase and a minor hexagonal-close-packed (hcp) phase. Upon the introduction of 16 at. % interstitial carbon (CoCrNi-C), a remarkable phase transformation occurs, resulting in an isotropic amorphous structure. Under low-load and low-sliding-velocity conditions, the CoCrNi-C film exhibits a 21% reduction in coefficient of friction (CoF) and 17% reduction in wear rate. More notably, when subjected to higher loads and sliding velocities, the CoCrNi film experiences rapid failure within the initial 100 cycles, manifesting as microcracks, breakage, and peeling. In contrast, the amorphous CoCrNi-C film demonstrates remarkable durability, sustaining over 5000 cycles without failure. The wear rate exhibits a negative correlation with load but a positive correlation with sliding velocity. This enhanced wear resistance can be attributed to the amorphous nature of the CoCrNi-C film, which inhibits local strain accumulation, preventing strain localization that typically leads to crack initiation and propagation in the CoCrNi film. Additionally, the formation of a protective oxide layer contributes to the improved wear resistance of CoCrNi-C film under higher loads and lower sliding velocities. This study provides valuable insights into the design of wear-resistant CoCrNi-based MEA coatings through massive interstitial carbon-induced amorphization.

Sliding Wear of CoCrNi Medium-Entropy Alloy at Elevated Temperatures: Wear Mechanism Transition and Subsurface Microstructure Evolution

Significantly Enhanced Wear Resistance of an Ultrafine-Grained CrFeNi Medium-Entropy Alloy at Elevated Temperatures

Sliding Wear of Nanocrystalline Nb-Ag at Elevated Temperatures: Evolution of Subsurface Microstructure and Its Correlation with Wear Performance

Microstructure evolution and deformation mechanism of coherent L12-strengthened high-entropy alloy during sliding wear

The sliding wear behaviour of CoCrFeMnNi and AlxCoCrFeNi high entropy alloys at elevated temperatures

Tribo-induced microstructural changes and associated wear mechanisms of CoFeNi 2 medium entropy alloy at elevated temperatures

Room and Elevated Temperature Sliding Friction and Wear Behavior of Al0.3CoFeCrNi and Al0.3CuFeCrNi2 High Entropy Alloys

Friction-induced rapid amorphization in a wear-resistant (CoCrNi) 88 Mo 12 dual-phase medium-entropy alloy at cryogenic temperature

Significantly Lowering Friction and Wear of CoCrNi Medium-Entropy Alloy Film Via Massive Interstitial Carbon-Induced Amorphization

Microstructure and Dry Sliding Wear Behavior of Ultrafine-Grained Co-30 At% Cr Alloy at Room and Elevated Temperatures

Sliding Wear Behavior of a Laves Phase-Strengthened CrFeNiNb0.158 Alloy at Room and Elevated Temperatures

Sliding Wear Behavior of Spark Plasma-Sintered Cu–6 Wt Pct Cr Alloy at Room and Elevated Temperatures

Worn surface and subsurface layer structure formation behavior on wear mechanism of CoCrFeMnNi high entropy alloy in different sliding conditions

Tribological behavior of an AlCoCrFeNi2.1 eutectic high entropy alloy sliding against different counterfaces

Achieving low wear in a μ-phase reinforced high-entropy alloy and associated subsurface microstructure evolution

On the enhanced wear resistance of CoCrFeMnNi high entropy alloy at intermediate temperature

Mechanical Properties and Tribological Behavior of Al0.5CoCrFeNb0.5Ni High-Entropy Alloy at High Temperatures

Insights into the microstructural evolution and wear behavior of underwater friction stir processed CoCrFeNiMn high-entropy alloy

Temperature-mediated tribological characteristics of 40CrNiMoA steel and Inconel 718 alloy during sliding against Si3N4 counterparts

Effect of microstructure evolution on wear resistance of equal molar CoCrFeNi high-entropy alloy

Sliding Wear Behaviors of the AlNiTi Amorphous Coatings: Effect of Temperatures