Abstract:The microstructural evolution and grain refinement mechanisms of a Ti-10V-2Fe-3Al alloy, β-solution quenched and cold forged (CF) to strains of 0.1, 0.35, and 1.2 have been investigated using optical microscopy (OM), X-ray diffraction (XRD), and transmission electron microscopy (TEM). The results showed that the stress-induced martensitic transformation became a predominant deformation mode in the metastable Ti-10V-2Fe-3Al alloy during cold forging. These martensites α″ repeatedly divided the original β parent phase into a large number of micron-sized blocks when the forging strain was 0.1. Shear bands were observed to traverse α″/β lamellae and resulted in a significant grain refinement of the β phase, as the forging strain increased to 0.35. The degree of grain refinement inside shear bands was higher than the outside. Nanocrystalline and amorphous structures were produced in local areas of the original β phase, when the forging strain rose to 1.2. This dramatic grain refinement in the metastable Ti-10V-2Fe-3Al alloy could be attributed to the stress-induced martensitic transformation promoting the initiation and growth of shear bands across α″/β lamellae. More dislocations were produced and accumulated inside grains to accommodate plastic deformation. The crystal structure was collapsed and an amorphous structure was formed as soon as the dislocation density was accumulated to a critical value of 1014/cm2. Moreover, some of the reverse martensitic phase transformation, α″→β, was observed to contribute to grain refinement of Ti-10V-2Fe-3Al alloy as well.

Effect of Α′ Martensite on Microstructure Refinement after Α + Β Isothermal Treatment in a Near-α Titanium Alloy Ti60

Effect of alpha ' Martensite on Microstructure Refinement After alpha plus beta Isothermal Treatment in a Near-alpha Titanium Alloy Ti60

Deformation-induced Microstructure Refinement in Primary Α Phase-Containing Ti–10V–2Fe–3Al Alloy

Enhanced Grain Refining Efficiency Assisted by Martensitic Transformation in Metastable Β-Titanium Alloy

Influence of Solution Treatment on the Microstructure and Mechanical Property of Ti60 Alloy

Revealing the Effect of α' Decomposition on Microstructure Evolution and Mechanical Properties in Ti80 Alloy

The Effect of Precursory Α and Ω Phase on Microstructure Evolution and Tensile Properties of Metastable Β Titanium Alloy

Effect of thermo-mechanical processing on microstructure and mechanical properties of near α titanium alloys

Tailoring microstructure and mechanical performance of a β-solidifying TiAl alloy via martensitic transformation

Effect of Trace B on the Microstructure and Mechanical Properties of a Newly Near α High Temperature Titanium Alloy

Significant α-phase growth confinement in Grade 4 titanium and substantial β-phase refinement in Grade 7 titanium

Study on the Relationship Between Microstructure and Mechanical Property in a Metastable Β Titanium Alloy

Influence of Elevated Temperature Holding Time on Microstructure and Properties in Heat Affected Zone of Fine Grained Titanium Alloy

α′′ phase-assisted nucleation to obtain ultrafine α precipitates for designing high-strength near-β titanium alloys

Strengthening of a Near β-Ti Alloy through β Grain Refinement and Stress-Induced α Precipitation

Microstructures and Tensile Properties of a High Strength Β Titanium Alloy Ti5Al4Zr8Mo7V by Near Β Forging and Β-Transus Forging

Deformation-Induced Grain Refinement and Amorphization in Ti-10V-2Fe-3Al Alloy

Influence of Thermal Treatment on Element Partitioning in Α+β Titanium Alloy

Microstructure Evolution of Near-Α Titanium Alloys During Thermomechanical Processing

The Indirect Influence of the Ω Phase on the Degree of Refinement of Distributions of the Α Phase in Metastable Β-Titanium Alloys

Formation mechanism of lamellar bimodal microstructure and mechanical property in the high temperature near α titanium alloy